EPC-R4710 Android 7 user guide
Contents
- 1 產品介紹(Product introduction )
- 2 接口布局和尺寸(Layout and Sizes)
- 3 Connector List
- 4 快速入门 (Quick Start)
- 5 Linux系统的基本使用(Linux System Basic Operating Method)
- 6 通用方法(General Method)
- 6.1 乙太網路使用方法(Ethernent Testing Method)
- 6.2 查看CPU温度(Check CPU Temperature)
- 6.3 查看CPU频率(Check CPU Frequency)
- 6.4 查看内存容量(Check Memory Capacity)
- 6.5 查看存储容量(Check Storage Capacity)
- 6.6 設置RTC (RTC Setting)
- 6.7 WiFi使用方法(WIFI Testing Method)
- 6.8 4G使用方法(4G Testing Method)
- 6.9 蓝牙使用方法(BlueTooth Operating Method)
- 6.10 音訊使用方法(BlueTooth Operating Method)
- 6.11 I2C 測試( I2C Test method)
- 6.12 看門狗測試 (Watch Dog Test method)
- 6.13 攝像頭測試(Camera Test method)
- 6.14 遠程訪問及文件傳輸(Remote Access and File Transimmion)
- 7 QT 安装步骤
產品介紹(Product introduction )
產品特性(Product Features)
- Rockchip RK3399 ARM Dual Cortex-A72 and Quad Cortex-A53 1.8 GHz
- Onboard 2GB LPDDR4 memory and 16GB eMMC
- Dual HDMI(4K 60fps + 1080P)
- Support 4K H.264/H.265 Video decoder
- 6 serial, 1 USB3.0, 4 USB2.0 ,1 USB OTG, 2 GbE, 1 SPI, 1 I2C, 5 GPIO
- M.2 for WIFI/BT support, mini-PCIe for 3G/4G support
- Support Linux and Android
產品官網連結(Product Features)
Packing List
Part Number | Description |
EPC-R4710 | EPC-R4710 Box computer |
1960083394N001 | VESA MOUNT BKT 2U2X EPC-R4710 |
接口布局和尺寸(Layout and Sizes)
External I/O
接口布局圖 Board Dimension Layout
Connector List
AUDIO | Audio pin header |
EDP | EDP CONN |
LVDS | LVDS CONN |
BL | LVDS BKL CONN |
CSI | CSI CONN |
MINIPCIE | MINI PCIe 52P |
SIM | Nano SIM card |
M2 | M.2 CONN |
SD | SD slot |
BTN | Power button and LED |
DCIN1 | 12V DC jack |
COM1 | COM1 |
COM2/Debug | COM2 |
HDMI1 | HDMI1 CONN |
HDMI2 | HDMI2 CONN |
USB1 | USB Type A (USB 3.0 and 2.0) |
USB2 | USB pin header |
USB3 | USB pin header |
LAN1 | LAN1 |
LAN2 | LAN2 |
BAT | RTC CONN |
COM56 | COM5 and COM6 with RS-232 or RS-485 |
COM34 | COM3 and COM4 with RS-232 |
OTG | USB |
RST | Reset button |
CN3 | GPIO CONN |
CN1 | SPI |
CN2 | I2C |
接口引脚定義 (Pin definitions)
- 电池扣(RTC)
- 串口(RS-232 (COM1),RS-232/Debug Port (COM2/DEBUG),RS-232/485 (COM56),Internal RS-232 (COM34))
- 显示接口(LVDS,LVDS_BL,EDP,HDMI)
- LAN接口(LAN1,LAN2)
- USB接口(USB1,Pin Header,OTG)
- 音频接口(Audio)
- Micro SD & Nano SIM Card
- 电源及指示灯和开关机复位按钮(DC Power,Power Button and LED)
- Mini PCIe & MIPI CSI 接口
- M.2接口
- GPIO接口
- SPI ,I2C接口
- RSB-4710 Jumper List
机械尺寸 (Mechanical Characteristics)
快速入门 (Quick Start)
系统下载 (OS Download)
Note: AIV=Android image ABV=BSP
Product | Image Version | Release Date | Release Version | Release notes | Image Download | BSP Download Tag | Comment |
RSB-4710 | V1180 | 2020/08/27 | RTM | Release_Note |
Baidu Password:a887 |
RK3399_N7_AIV1180.xml | |
RSB-4710-lite | V1190 | 2020/8/28 | GA | Release_Note |
Baidu Password:a887 |
RK3399_N7_AIV1190.xml |
- Alpha: Basic I/O function bring up by RD;
- Beta: Basic I/O function、performance and middleware verified by RD. Peripherals integrated;
- GA: Beta version by QE verification;
- RTM: Beta version by SI/Power/QE verification and pre-loaded;
Android &Debian 燒錄方法 (Android Flash eMMC Method)
There are three ways to update images:
1.Using_AndroidToool.
There is no limitation by this way.
2.Using_storage(such sd_or_USB_disk)with_update.zip_in_it.
There are some limitations:
(1)The device must be able to boot up to Android system.
(2)Only update images from the same os, eg :
Android6.0 upgrade to Android6.0 or Android7.1 upgrade to Android7.1.
(3)Using update.zip to upgrade. (see more detail in "Create OTA zip" on how to create update.zip)
3.Using_bootup_sd_disk made_by SDDiskTool.
(1)Only update images from the same os, eg :
Android6.0 upgrade to Android6.0 or Android7.1 upgrade to Android7.1.
(2)Using update.img to upgrade.
Linux系统的基本使用(Linux System Basic Operating Method)
User Guide
RISC series(RSB-3710/RSB-4710/ROM-5780)
DS-100
- Linux BSP User Guide for rk3399 series Debian9
- Linux BSP User Guide for rk3399 series DeviceOn
- Linux BSP User Guide for SGI [DMS-SA53]
通用方法(General Method)
乙太網路使用方法(Ethernent Testing Method)
Command : ifconfig
root@linaro-alip:~# ifconfig docker0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255 ether 02:42:83:27:77:c0 txqueuelen 0 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.127.101 netmask 255.255.255.0 broadcast 192.168.127.255 inet6 fe80::e405:b000:5963:d697 prefixlen 64 scopeid 0x20<link> ether c6:ff:6c:34:9d:7d txqueuelen 1000 (Ethernet) RX packets 23 bytes 7566 (7.3 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 45 bytes 5391 (5.2 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device interrupt 24 eth1: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 ether 96:a4:98:8d:52:09 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10<host> loop txqueuelen 1 (Local Loopback) RX packets 484 bytes 32428 (31.6 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 484 bytes 32428 (31.6 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
Command : ping 192.168.127.101
root@linaro-alip:~# ping 192.168.127.101 PING 192.168.127.101 (192.168.127.101) 56(84) bytes of data. 64 bytes from 192.168.127.101: icmp_seq=1 ttl=64 time=0.221 ms 64 bytes from 192.168.127.101: icmp_seq=2 ttl=64 time=0.135 ms 64 bytes from 192.168.127.101: icmp_seq=3 ttl=64 time=0.134 ms 64 bytes from 192.168.127.101: icmp_seq=4 ttl=64 time=0.137 ms 64 bytes from 192.168.127.101: icmp_seq=5 ttl=64 time=0.137 ms ^C --- 192.168.127.101 ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 5ms rtt min/avg/max/mdev = 0.134/0.152/0.221/0.037 ms root@linaro-alip:~#
查看CPU温度(Check CPU Temperature)
root@linaro-alip:~# cat /sys/devices/virtual/thermal/thermal_zone0/temp 34444 # 或者直接以度爲單位顯示 echo $[$(cat /sys/class/thermal/thermal_zone0/temp)/1000]° >>> 37°
查看CPU频率(Check CPU Frequency)
root@linaro-alip:~# cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq 408000 root@linaro-alip:~# cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq 1416000
查看内存容量(Check Memory Capacity)
root@linaro-alip:~# busybox free -m total used free shared buff/cache available Mem: 1961 269 1454 18 237 1696 Swap: 0 0 0
查看存储容量(Check Storage Capacity)
root@linaro-alip:~# df -h Filesystem Size Used Avail Use% Mounted on /dev/root 7.9G 2.6G 4.9G 35% / devtmpfs 973M 8.0K 973M 1% /dev tmpfs 981M 0 981M 0% /dev/shm tmpfs 981M 8.9M 972M 1% /run tmpfs 5.0M 4.0K 5.0M 1% /run/lock tmpfs 981M 0 981M 0% /sys/fs/cgroup /dev/mmcblk1p10 6.4G 3.8M 6.4G 1% /userdata /dev/mmcblk1p7 63M 13M 48M 21% /oem tmpfs 197M 8.0K 197M 1% /run/user/1000 tmpfs 197M 0 197M 0% /run/user/0 root@linaro-alip:~#
設置RTC (RTC Setting)
root@linaro-alip:~# date Wed May 11 01:12:06 UTC 2022 root@linaro-alip:~# date -s "2022-5-11 09:12:00" Wed May 11 09:12:00 UTC 2022 root@linaro-alip:~# date Wed May 11 09:12:06 UTC 2022 root@linaro-alip:~# hwclock -w root@linaro-alip:~# hwclock 2022-05-11 09:12:17.266424+00:00
WiFi使用方法(WIFI Testing Method)
1.Click Settings
2.Turn on Wi-Fi
3.Choose ESSID (for example, Advantech for guest)
4.Input the password
5.Wi-Fi connected
4G使用方法(4G Testing Method)
蓝牙使用方法(BlueTooth Operating Method)
音訊使用方法(BlueTooth Operating Method)
I2C 測試( I2C Test method)
看門狗測試 (Watch Dog Test method)
攝像頭測試(Camera Test method)
遠程訪問及文件傳輸(Remote Access and File Transimmion)
QT 安装步骤
Qt5Creator_toolchain_Qt_5.11.3