Revision as of 11:32, 12 February 2019 by Alex.cheng (talk | contribs) (Modify description)
Jump to: navigation, search

User Guide for using mfgtool

Download Mfgtools

Yocto 2.1
branch = 4.1.15
git clone -b branch

Enter recovery mode


Set the correct boot mode, then power on.


Set the correct boot mode, then power on.

Other Projects

Set eng mode,then power on(1-off,2-on)
Other project mfgtool.jpg

Connect the OTG to the PC

After connecting to PC, a HID-compliant device will be shown in the Device
Dm mfgtool.jpg

Modify config file

modify cfg.ini

chip = Linux


name = ADV adv-loader & Image

imx6q-epcrs200-a1	1G
imx6dl-ebcrs03-a1	1G
imx6dl-ubc220-a1	1G
imx6q-ubc220-a1		1G
imx6q-ebcrb01-a1	1G
imx6q-ebcrs03-a1	2G
imx6qp-rom7421-a1	1G
imx6qp-rom7421-a1	2G
imx6q-rom3420-a1	1G
imx6q-rom3420-a1	2G
imx6q-rom5420-a1	1G
imx6q-rom5420-a1	2G
imx6q-rom5420-b1	1G
imx6dl-rom5420-b1	1G
imx6dl-rom5420-b1	2G
imx6q-rom5420-b1	2G
imx6q-rom7420-a1	1G
imx6q-rom7420-a1	2G
imx6q-rsb4410-a1	1G
imx6q-rsb4410-a2	1G
imx6q-rsb4411-a1	1G
imx6q-epcrs200-a1	1G
imx6q-rsb4411-a1	2G
imx6dl-rom5420-b1	512M
imx6dl-rom7421-a1	1G
imx6dl-rom7421-a1	512M

DDR = 1G
board = imx6q-rsb4411-a1
mmc = 0
image = fsl-image-qt5-imx6qrsb4411-20141218174618.rootfs.sdcard

which operation you want to do

name = 
ADV adv-loader & Image adv-loader & Image
ADV kernel		update zImage and dtb file
ADV u-boot		update u-boot
ADV adv-loader		update adv-loader

define config variable

DDR = (size of memory)
board = (projects name)
mmc = ( “0” means “emmc” ,”1” means “SD Card” .)
image = (If you want to update whole image,fill the image file name )

Copy file

You must copy file to Profiles\Linux\OS Firmware\files\imx6qrsb4411a1-1G\

ADV Image 		fsl-image-qt5-imx6qprom7421a1-20170116192833.rootfs.sdcard
ADV kernel		zImage and dtb file
ADV u-boot		u-boot_crc.bin.crc & u-boot_crc.bin
ADV adv-loader		SPL

Running mfgtool and update

running the MfgTool2.exe and update

  1. If you can’t running mfgtool2.exe, you can check MfgTool.log
  2. Click “Start”,you can get information form debug console
    Debug mfgtool.jpg
  3. After update finish,it will be shown below
  4. Click “Exit” to terminate the application.