IoTGateway/BSP/Linux/iMX6/Mfgtool

From ESS-WIKI
Revision as of 10:32, 12 February 2019 by Alex.cheng (Talk | contribs) (Modify description)

Jump to: navigation, search

User Guide for using mfgtool

Download Mfgtools

Yocto 2.1
branch = 4.1.15
git clone -b branch https://github.com/ADVANTECH-Corp/Mfgtools.git

Enter recovery mode

ROM-5420

Set the correct boot mode, then power on.
Rom5420-mfgtool.jpg

EBC-RS03

Set the correct boot mode, then power on.
Ebcrs03-mfgtool.jpg

Other Projects

Set eng mode,then power on(1-off,2-on)
Other project mfgtool.jpg

Connect the OTG to the PC

After connecting to PC, a HID-compliant device will be shown in the Device
Dm mfgtool.jpg

Modify config file

modify cfg.ini

mfgtools/cfg.ini
[profiles]
chip = Linux

[platform]

[LIST]
name = ADV adv-loader & Image

#Projects
imx6q-epcrs200-a1	1G
imx6dl-ebcrs03-a1	1G
imx6dl-ubc220-a1	1G
imx6q-ubc220-a1		1G
imx6q-ebcrb01-a1	1G
imx6q-ebcrs03-a1	2G
imx6qp-rom7421-a1	1G
imx6qp-rom7421-a1	2G
imx6q-rom3420-a1	1G
imx6q-rom3420-a1	2G
imx6q-rom5420-a1	1G
imx6q-rom5420-a1	2G
imx6q-rom5420-b1	1G
imx6dl-rom5420-b1	1G
imx6dl-rom5420-b1	2G
imx6q-rom5420-b1	2G
imx6q-rom7420-a1	1G
imx6q-rom7420-a1	2G
imx6q-rsb4410-a1	1G
imx6q-rsb4410-a2	1G
imx6q-rsb4411-a1	1G
imx6q-epcrs200-a1	1G
imx6q-rsb4411-a1	2G
imx6dl-rom5420-b1	512M
imx6dl-rom7421-a1	1G
imx6dl-rom7421-a1	512M

[variable]
DDR = 1G
board = imx6q-rsb4411-a1
mmc = 0
image = fsl-image-qt5-imx6qrsb4411-20141218174618.rootfs.sdcard

which operation you want to do

[LIST]
name = 
ADV adv-loader & Image adv-loader & Image
ADV kernel		update zImage and dtb file
ADV u-boot		update u-boot
ADV adv-loader		update adv-loader

define config variable

[variable]
DDR = (size of memory)
board = (projects name)
mmc = ( “0” means “emmc” ,”1” means “SD Card” .)
image = (If you want to update whole image,fill the image file name )

Copy file

You must copy file to Profiles\Linux\OS Firmware\files\imx6qrsb4411a1-1G\

ADV Image 		fsl-image-qt5-imx6qprom7421a1-20170116192833.rootfs.sdcard
ADV kernel		zImage and dtb file
ADV u-boot		u-boot_crc.bin.crc & u-boot_crc.bin
ADV adv-loader		SPL


Running mfgtool and update

running the MfgTool2.exe and update

Mfgtool.jpg
  1. If you can’t running mfgtool2.exe, you can check MfgTool.log
  2. Click “Start”,you can get information form debug console
    Debug mfgtool.jpg
  3. After update finish,it will be shown below
    Mfgtool2.jpg
  4. Click “Exit” to terminate the application.