IoTGateway/BSP/Linux/iMX6/Mfgtool

From ESS-WIKI
Revision as of 09:05, 25 February 2019 by Alex.cheng (Talk | contribs) (Modify description)

Jump to: navigation, search

User Guide for using mfgtool

Download Mfgtools

Yocto 2.1
branch = 4.1.15
git clone -b branch https://github.com/ADVANTECH-Corp/Mfgtools.git

Enter recovery mode

ROM-5420

Set the correct boot mode, then power on.
Rom5420-mfgtool.jpg

EBC-RS03

Set the correct boot mode, then power on.
Ebcrs03-mfgtool.jpg

EBC-RM01

Set the correct boot mode, please do not insert the boot SD card. Then power on.

EBCRM01-mfgtool.jpg

Other Projects

Set eng mode,then power on(1-off,2-on)
Other project mfgtool.jpg

Connect the OTG to the PC

After connecting to PC, a HID-compliant device will be shown in the Device
Dm mfgtool.jpg

Modify config file

modify cfg.ini

mfgtools/cfg.ini
[profiles]
chip = Linux

[platform]

[LIST]
name = ADV adv-loader & Image

#Projects
imx6q-epcrs200-a1	1G
imx6dl-ebcrs03-a1	1G
imx6dl-ubc220-a1	1G
imx6q-ubc220-a1	1G
imx6q-ebcrb01-a1	1G
imx6q-ebcrs03-a1	2G
imx6qp-rom7421-a1	1G
imx6qp-rom7421-a1	2G
imx6q-rom3420-a1	1G
imx6q-rom3420-a1	2G
imx6q-rom5420-a1	1G
imx6q-rom5420-a1	2G
imx6q-rom5420-b1	1G
imx6dl-rom5420-b1	1G
imx6dl-rom5420-b1	2G
imx6q-rom5420-b1	2G
imx6q-rom7420-a1	1G
imx6q-rom7420-a1	2G
imx6q-rsb4410-a1	1G
imx6q-rsb4410-a2	1G
imx6q-rsb4411-a1	1G
imx6q-epcrs200-a1	1G
imx6q-rsb4411-a1	2G
imx6dl-rom5420-b1	512M
imx6dl-rom7421-a1	1G
imx6dl-rom7421-a1	512M
imx7d-ebcrm01-a1	2G 
[variable]
DDR = 1G
board = imx6q-rsb4411-a1
mmc = 0
image = fsl-image-qt5-imx6qrsb4411-20141218174618.rootfs.sdcard

which operation you want to do

[LIST]
name = 
ADV adv-loader & Image adv-loader & Image for i.MX6
ADV kernel		update zImage and dtb file for i.MX6
ADV u-boot		update u-boot for i.MX6
ADV adv-loader		update adv-loader for i.MX6
ADV imx7 u-boot	update u-boot for i.MX7
ADV imx7 qspi u-boot	update u-boot to qspi for i.MX7
ADV imx7 kernel	update zImage and dtb file for i.MX7
ADV imx7 Image	update total image for i.MX7

define config variable

[variable]
DDR = (size of memory)
board = (projects name)
mmc = ( “0” means “emmc” ,”1” means “SD Card” .)
image = (If you want to update whole image,fill the image file name )

Copy file

You must copy file to Profiles\Linux\OS Firmware\files\imx6qrsb4411a1-1G\

ADV Image 		fsl-image-qt5-imx6qrsb4411-20141218174618.rootfs.sdcard
ADV kernel		zImage and dtb file
ADV u-boot		u-boot_crc.bin.crc & u-boot_crc.bin
ADV adv-loader		SPL

Running mfgtool and update

running the MfgTool2.exe and update

Mfgtool.jpg
  1. If you can’t running mfgtool2.exe, you can check MfgTool.log
  2. Click “Start”,you can get information form debug console
    Debug mfgtool.jpg
  3. After update finish,it will be shown below
    Mfgtool2.jpg
  4. Click “Exit” to terminate the application.