Difference between revisions of "IoTGateway/BSP/Linux/iMX6/Yocto LBV8 User Guide"

From ESS-WIKI
Jump to: navigation, search
(Modify description)
 
(8 intermediate revisions by 5 users not shown)
Line 40: Line 40:
 
:for example,
 
:for example,
  
::<tt>imx6dlrom5420b1 for ROM-5420-Solo B1</tt>
+
::<tt>imx6dlrom5420b1 for ROM-5420 B1 Solo</tt>
::<tt>imx6dlrom7421a1 for ROM-7421-Solo A1</tt>
+
::<tt>imx6dlrom7421a1 for ROM-7421 A1 Solo</tt>
::<tt>imx6dlubc220a1 for UBC-220-Dual-Light A1</tt>
+
::<tt>imx6dlrsb3430a1 for RSB-3430 A1 Dual-Lite</tt>
::<tt>imx6qprom7421a1 for ROM-7421-Dual/Quad-Plus A1</tt>
+
::<tt>imx6dlubc220a1 for UBC-220 A1 Dual-Lite</tt>
::<tt>imx6qrom3420a1 for ROM-3420-Dual/Quad A1</tt>
+
::<tt>imx6dlrsb4411a1 for RSB-4411 A1 Dual-Lite</tt><br/>
::<tt>imx6qrom5420a1 for ROM-5420-Dual/Quad A1</tt>
+
::<tt>imx6qprom7421a1 for ROM-7421 A1 Dual/Quad-Plus</tt>
::<tt>imx6qrom5420b1 for ROM-5420-Dual/Quad B1</tt>
+
::<tt>imx6qrom3420a1 for ROM-3420 A1 Dual/Quad</tt>
::<tt>imx6qrom7420a1 for ROM-7420-Dual/Quad A1</tt>
+
::<tt>imx6qrom5420a1 for ROM-5420 A1 Dual/Quad</tt>
::<tt>imx6qrsb4410a1 for RSB-4410-Dual A1</tt>
+
::<tt>imx6qrom5420b1 for ROM-5420 B1 Dual/Quad</tt>
::<tt>imx6qrsb4410a2 for RSB-4410-Dual A2</tt><tt></tt><br/><tt></tt>
+
::<tt>imx6qrom7420a1 for ROM-7420 A1 Dual/Quad</tt>
::<tt>imx6qrsb4411a1 for RSB-4411-Dual/Quad A1</tt><tt></tt><br/>
+
::<tt>imx6qrsb3430a1 for RSB-3430 A1 Dual/Quad</tt>
::<tt>imx6qrsb6410a1 for RSB-6410-Dual/Quad A1</tt>
+
::<tt>imx6qrsb4410a1 for RSB-4410 A1 Dual</tt>
::<tt>imx6qrsb6410a2 for RSB-6410-Dual/Quad A2</tt><tt></tt>
+
::<tt>imx6qrsb4410a2 for RSB-4410 A2 Dual</tt><br/>
::<tt>imx6qubcds31a1 for UBC-DS31-Dual A1</tt>
+
::<tt>imx6qrsb4411a1 for RSB-4411 A1 Dual/Quad</tt><br/>
::<tt>imx6qwise3310a1 for WISE-3310-Dual A1</tt>
+
::<tt>imx6qrsb6410a1 for RSB-6410 A1 Dual/Quad</tt>
 +
::<tt>imx6qrsb6410a2 for RSB-6410 A2 Dual/Quad</tt>
 +
::<tt>imx6qubcds31a1 for UBC-DS31 A1 Dual</tt>
 +
::<tt>imx6qwise3310a1 for WISE-3310 A1 Dual</tt>
 +
 
 +
:You can also use the command below to check supported machines on BSP
 +
::<code>$ source setup-environment</code>
  
 
<span style="color:purple">'''${MEM_SIZE}'''</span>&nbsp;: memory size
 
<span style="color:purple">'''${MEM_SIZE}'''</span>&nbsp;: memory size
Line 290: Line 296:
  
 
:To create/continue a build environment
 
:To create/continue a build environment
:Perform the following command in terminal console
+
:If you operate on docker images, please install tmux application before running this command
::to show up menuconfig
+
:::<code>$ sudo apt-get install tmux</code>
 +
:Type following command to enter tmux
 +
:::<code>$ tmux</code>
 +
:Perform the following command in terminal console to show up menuconfig
 
:::<code>$ bitbake linux-imx -c menuconfig</code>
 
:::<code>$ bitbake linux-imx -c menuconfig</code>
::::* If you operate on docker images, please install tmux application before running this command.
+
:After edit menuconfig, type following command to exit tmux windows
:::::<code>$ sudo apt-get install tmux</code>
+
:::<code>$ exit</code>
::to build kernel image
+
:to build kernel image
 
:::<code>$ bitbake linux-imx</code>
 
:::<code>$ bitbake linux-imx</code>
 
:The two files, zImage & zImage-<span style="color:#7030a0">'''${IMX6PROC}'''</span>-<span style="color:#7030a0">'''${BOARD}'''</span>-<span style="color:#7030a0">'''${BOARD'''</span>'''<span style="color:#7030a0">_REV</span><span style="color:#7030a0">}</span>'''.dtb, will be located in the directory, ./tmp/deploy/images/<span style="color:#7030a0">'''${MC}'''</span>.
 
:The two files, zImage & zImage-<span style="color:#7030a0">'''${IMX6PROC}'''</span>-<span style="color:#7030a0">'''${BOARD}'''</span>-<span style="color:#7030a0">'''${BOARD'''</span>'''<span style="color:#7030a0">_REV</span><span style="color:#7030a0">}</span>'''.dtb, will be located in the directory, ./tmp/deploy/images/<span style="color:#7030a0">'''${MC}'''</span>.
Line 394: Line 403:
 
:Navigate to the directory where local.conf located
 
:Navigate to the directory where local.conf located
 
::<code>$ cd <span style="color:#7030a0">'''${BSP_HOME}'''</span>/<span style="color:#7030a0">'''${BDIR'''</span>'''<span style="color:#7030a0">}</span>'''/conf</code>
 
::<code>$ cd <span style="color:#7030a0">'''${BSP_HOME}'''</span>/<span style="color:#7030a0">'''${BDIR'''</span>'''<span style="color:#7030a0">}</span>'''/conf</code>
:Add following two lines to local.conf
+
:Add the following three lines to local.conf
::<code>CORE_IMAGE_EXTRA_INSTALL += "chromium"</code>
+
::<code>CORE_IMAGE_EXTRA_INSTALL += "chromium libexif"</code>
 
::<code>LICENSE_FLAGS_WHITELIST="commercial"</code>
 
::<code>LICENSE_FLAGS_WHITELIST="commercial"</code>
 +
::<code>PNBLACKLIST[chromium] = ""</code>
 
:[[#To_continue_an_exist_build_environment|Continue an exist build environment]] and [[#To_build_sdcard_image|build sdcard image]]
 
:[[#To_continue_an_exist_build_environment|Continue an exist build environment]] and [[#To_build_sdcard_image|build sdcard image]]
  
Line 449: Line 459:
  
 
  $ dd if=u-boot_crc.bin.crc of=/dev/mmcblk0 bs=512 seek=2 conv=fsync
 
  $ dd if=u-boot_crc.bin.crc of=/dev/mmcblk0 bs=512 seek=2 conv=fsync
  $ dd if=u-boot-crc.bin of=/dev/mmcblk0 bs=512 seek=3 conv=fsync
+
  $ dd if=u-boot_crc.bin of=/dev/mmcblk0 bs=512 seek=3 conv=fsync
  
 
== <span style="color:#0070c0">Building & updating kernel/modules/dtb manually</span> ==
 
== <span style="color:#0070c0">Building & updating kernel/modules/dtb manually</span> ==
Line 457: Line 467:
 
=== <span style="color:#0070c0">Copy BSP tarball to Container</span> ===
 
=== <span style="color:#0070c0">Copy BSP tarball to Container</span> ===
  
Refer to [http://ess-wiki.advantech.com.tw/view/IoTGateway/BSP/Linux/iMX6/Yocto_LBV8_User_Guide#Copy_BSP_tarball_to_Container Copy_BSP_tarball_to_Container] , <span style="color:#FF0000;">copy kernel tarball </span>to ${WORKSPACE} and back to container
+
Refer to [http://ess-wiki.advantech.com.tw/view/IoTGateway/BSP/Linux/iMX6/Yocto_LBV8_User_Guide#Copy_BSP_tarball_to_Container Copy_BSP_tarball_to_Container] , <span style="color:#FF0000;">copy kernel tarball </span>to ${WORKSPACE} and back to container , or git clone source code form ADVantech github
  
 
change owner & unpack tarball
 
change owner & unpack tarball
Line 463: Line 473:
 
  $ sudo chown adv:adv imx6LBV8210_2017-02-20_linux-imx6.tgz
 
  $ sudo chown adv:adv imx6LBV8210_2017-02-20_linux-imx6.tgz
 
  $ tar zxvf imx6LBV8210_2017-02-20_linux-imx6.tgz
 
  $ tar zxvf imx6LBV8210_2017-02-20_linux-imx6.tgz
 +
 +
git clone source code form ADVANTECH github, and git checkout &lt;tag&gt;
 +
 +
$ git clone [https://github.com/ADVANTECH-Corp/linux-imx6.git https://github.com/ADVANTECH-Corp/linux-imx6.git]
 +
$ git checkout imx6LBV8210
  
 
=== <span style="color:#0070c0">Config kernel</span> ===
 
=== <span style="color:#0070c0">Config kernel</span> ===

Latest revision as of 11:08, 10 July 2020


Contents

Getting Started

Conventions

${PREBUILT_IMAGE} : compressed prebuilt image (*.img.gz)

${CONTAINER_NAME} : container name (e.g. imx6LBV8040)

${BSP_TARBALL} : BSP tarball (*.tgz)

${BSP_HOME} : home directory of the BSP

${BDIR} : build directory (e.g. build_x11)

${MX6PROC} : i.MX6 Processor

mx6q for iMX6 Quad Core / Dual Core
mx6dl for iMX6 Dual Lite / Solo

${IMX6PROC} : i.MX6 Processor

imx6q / imx6dl

${BOARD} : available target boards list below

rom5420/ / rom7421 / ubc220 / rom3420 / rom7420 / rsb4410 / rsb4411 / rsb6410 / ubcds31 / wise3310

${BOARD_REV} : board revision

a1 / a2 / b1

${MC} : machine code combined with ${IMX6PROC}${BOARD}${BOARD_REV}

for example,
imx6dlrom5420b1 for ROM-5420 B1 Solo
imx6dlrom7421a1 for ROM-7421 A1 Solo
imx6dlrsb3430a1 for RSB-3430 A1 Dual-Lite
imx6dlubc220a1 for UBC-220 A1 Dual-Lite
imx6dlrsb4411a1 for RSB-4411 A1 Dual-Lite
imx6qprom7421a1 for ROM-7421 A1 Dual/Quad-Plus
imx6qrom3420a1 for ROM-3420 A1 Dual/Quad
imx6qrom5420a1 for ROM-5420 A1 Dual/Quad
imx6qrom5420b1 for ROM-5420 B1 Dual/Quad
imx6qrom7420a1 for ROM-7420 A1 Dual/Quad
imx6qrsb3430a1 for RSB-3430 A1 Dual/Quad
imx6qrsb4410a1 for RSB-4410 A1 Dual
imx6qrsb4410a2 for RSB-4410 A2 Dual
imx6qrsb4411a1 for RSB-4411 A1 Dual/Quad
imx6qrsb6410a1 for RSB-6410 A1 Dual/Quad
imx6qrsb6410a2 for RSB-6410 A2 Dual/Quad
imx6qubcds31a1 for UBC-DS31 A1 Dual
imx6qwise3310a1 for WISE-3310 A1 Dual
You can also use the command below to check supported machines on BSP
$ source setup-environment

${MEM_SIZE} : memory size

1G / 2G / 512M

${SD_DEVICE} : device name of SD card in Linux (e.g. /dev/sdf)

${SDCARD_IMAGE} : sdcard image built by bitbake (*.sdcard)

${WORKSPACE} : host workspace folders

${UBOOT} :u-boot version(e.g. 2016.03)

${KERNEL} : linux kernel version(e.g. 4.1.15)

${TOOLCHAIN} : toolchain installed directory(e.g. /opt/fsl-imx-x11/4.1.15-2.0.0)

debug console / serial console

serial terminal program (e.g. minicom, putty, teraterm ...) that serial port is configured to 115200 8N1

terminal console

terminal program (e.g. gnome-terminal, xfce4-terminal ...)

Docker install and setting

If you don't have docker in your system, then you can follow the below  steps to install docker and run it first.

To install Docker Engine on your platform

Please refer to Docker Installation Guide for details

To pull ubuntu 12.04 image from Docker Hub 

$ docker pull advrisc/u12.04-imx6lbv3
$ docker run --name imx6LBV8200  -it advrisc/u12.04-imx6lbv3 /bin/bash

To copy BSP from local filesystem to the container

$ docker cp ${BSP_PACK} imx6LBV8200:/home/adv/ 

To create container

$ docker run --privileged -it --name ${CONTAINER_NAME} -v ${WORKSPACE}:/home/adv/adv-release-bsp -v /dev:/dev advrisc/u12.04-imx6lbv3 /bin/bash

Get BSP

You have two methods to put BSP into container created above

Download BSP From GitHub

The following example shows how to download the Advantech Yocto BSP from GitHub.
For this example, a directory called adv-release-bsp is created for the project.
Refer to IoTGateway/BSP/Linux/iMX6/OS Support List new , Official version "imx6LBV8040" is taken as an example :
$ git config --global user.name "Your Name"
$ git config --global user.email you@example.com
$ mkdir adv-release-bsp
$ sudo chown adv:adv adv-release-bsp
$ cd adv-release-bsp
$ repo init -u git://github.com/ADVANTECH-Corp/adv-arm-yocto-bsp.git -b imx-4.1-krogoth -m imx6LBV8040.xml
$ repo sync
If you want to get latest bsp
$ repo init -u git://github.com/ADVANTECH-Corp/adv-arm-yocto-bsp.git -b imx-4.1-krogoth
$ repo sync

Copy BSP tarball to Container

If you have BSP tarball (eg. imx6LBV8040_2017-01-16.tgz), then you have to copy it into container.

Follow the steps below:

1.Exit container and back to local machine

$ exit

2.Copy BSP tarball to ${WORKSPACE} , and change owner

$ cp imx6LBV8040_2017-01-16.tgz ${WORKSPACE}
$ sudo chown adv:adv ${WORKSPACE}/imx6LBV8040_2017-01-16.tgz 

3.Back to container

$ docker start ${CONTAINER_NAME}
$ docker attach ${CONTAINER_NAME}

4.Unpack BSP tarball

$ tar zxvf imx6LBV8040_2017-01-16.tgz

Downloads tarball

Not necessarily step
During building  Yocto image , it will generate downloads folder which includes all packages we need , but it usually can't fetch normally, so we keep this downloads folder. Then we can reduce some fetch failed issue.
You can get Downloads tarball (downloads-2.1.tar.gz) from following URL:
https://pan.baidu.com/s/1nvqgx2T#list/path=%2FELAA%2Fimx6_yocto_bsp_2.1_2.0.0%2Fdownloads&parentPath=%2FELAA
If you get downloads tarball, you can copy to your ${WORKSPACE}

Follow the steps below:

1.Exit container and back to local machine

$ exit

2.Copy Downloads tarball to ${WORKSPACE} , and change owner

$ cp downloads-2.1.tar.gz ${WORKSPACE}
$ sudo chown adv:adv ${WORKSPACE}/downloads-2.1.tar.gz 

3.Back to container

$ docker start ${CONTAINER_NAME}
$ docker attach ${CONTAINER_NAME}

4.Unpack Downloads tarball

$ tar zxvf downloads-2.1.tar.gz

5.make link to downloads folder

$ cd adv-release-bsp
$ ln -s ${WORKSPACE}/downloads_2.1 downloads

Introducing BSP

The BSP is based on Yocto Project with Freescale enhanced features for i.MX6, plus specific target board features from Advantech Inc..
The Advantech Yocto Project BSP Release directory contains a "sources" directory, which contains the recipes used to build,

one or more build directories, and a set of scripts used to set up the environment.

The recipes used to build the project come from both the community and Advantech. The Yocto Project layers are downloaded

to the sources directory. This sets up the recipes that are used to build the project.

Naming Rule

The tarball/prebuilt image name is consist of the model name followed by "LB" or "LI" plus version number and released date.
For example, BSP file name: imx6LBV8040_2017-01-16.tgz
which , "LB" is acronym of Linux BSP,
           "V8040" stands for Version 8.040.




For example, Yocto image name: 7421A1LIV8040_DualPlus_2017-01-16.img.gz
which "7421A1" stands for ROM-7421 A1
          "LI" is acronym for prebuilt Linux Image,
          "DualPlus" means this image is fit for Dual Plus Core/Quad Plus Core.
For example, Yocto image name: 3420A1LIV8050_DualQuad_2017-01-17.img.gz
which "3420A1" stands for ROM-3420 A1
          "LI" is acronym for prebuilt Linux Image,
          "DualQuad" means this image is fit for Dual Core/Quad Core.
For example, Yocto image name: U220A1LIV8080_DualLiteSolo_2017-02-08.img.gz
which "U220A1" stands for UBC-220 A1
          "LI" is acronym for prebuilt Linux Image,
          "DualLiteSolo" means this image is fit for Dual Lite Core/Solo Core.

BSP Content

The description of some important folders list below:
sources/
meta-advantech/ : meta layer by Advantech
meta-fsl-*/ : meta layer by Freescale
fsl-setup-release.sh : to create one new build environment
setup-environment : to continue an exist build environment

Build Instructions

To create one new build environment

Perform the following commands in terminal console
$ cd ${BSP_HOME}
$ MACHINE=${MC} source fsl-setup-release.sh -b ${BDIR} -e x11
You need to read and accept the EULA.
RTENOTITLE

To continue an exist build environment

Perform the following commands in terminal console
$ cd ${BSP_HOME}
$ source setup-environment ${BDIR}

To build sdcard image

To create/continue a build environment
Perform the following command in terminal console
$ bitbake fsl-image-qt5
The file, fsl-image-qt5-${MC}.sdcard, will be located in directory, ./tmp/deploy/images/${MC}, while building process finished successfully.

To build toolchain installer

To create/continue a build environment
Perform the following command in terminal console
$ bitbake meta-toolchain-qt5
The below installer will be located in the directory "./tmp/deploy/sdk".
fsl-imx-x11-glibc-x86_64-meta-toolchain-qt5-cortexa9hf-vfp-neon-toolchain-${KERNEL}-1.1.0.sh

To build u-boot

To create/continue a build environment
Perform the following command in terminal console
$ bitbake u-boot-imx
The two files, u-boot_crc.bin & u-boot_crc.bin.crc, will be located in the directory, ./tmp/deploy/images/${MC}.

To modify source code and rebuild u-boot

To create/continue a build environment
Perform the following command in terminal console
to modify source code and created a patch file
$ git diff > test.patch
to create "u-boot-imx" directory and copy the "test.patch" file in following path
sources/meta-advantech/meta-fsl-imx6/recipes-bsp/u-boot$
to open "u-boot-imx_2016.03.bbappend" file in following path
sources/meta-advantech/meta-fsl-imx6/recipes-kernel$vi u-boot-imx_2016.03.bbappend
FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
SRCBRANCH = "imx_v2016.03_4.1.15_2.0.0_ga"
UBOOT_SRC = "..."
SRCREV = "${AUTOREV}"
to add path information of patch file to u-boot-imx_2016.03.bbappend file
SRC_URI += "file://test.patch
to clean u-boot image and code if you modify content of "mx6*.defconfig" file or "Makefile" file in the patch file
$ bitbake u-boot-imx -c cleansstate
to build u-boot image
$ bitbake u-boot-imx

To build linux kernel

To create/continue a build environment
If you operate on docker images, please install tmux application before running this command
$ sudo apt-get install tmux
Type following command to enter tmux
$ tmux
Perform the following command in terminal console to show up menuconfig
$ bitbake linux-imx -c menuconfig
After edit menuconfig, type following command to exit tmux windows
$ exit
to build kernel image
$ bitbake linux-imx
The two files, zImage & zImage-${IMX6PROC}-${BOARD}-${BOARD_REV}.dtb, will be located in the directory, ./tmp/deploy/images/${MC}.

To modify source code and rebuild linux kernel

To create/continue a build environment
Perform the following command in terminal console
to modify source code and created a patch file
$ git diff > test.patch
to create "linux-imx" directory and copy the "test.patch" file in following path 
sources/meta-advantech/meta-fsl-imx6/recipes-kernel/linux/linux-imx$
to open "linux-imx_4.1.15.bbappend" file in following path  (linux-imx_4.1.15.bbappend will check linux-imx folder  )
sources/meta-advantech/meta-fsl-imx6/recipes-kernel/linux/$vi linux-imx_4.1.15.bbappend
FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
SRCBRANCH = "imx_4.1.15_2.0.0_ga"
KERNEL_SRC = "..."
SRCREV = "${AUTOREV}"
to add path information of patch file to linux-imx_4.1.15.bbappend file
SRC_URI += "file://test.patch
to clean kernel image and code if you modify content of "imx_v7_adv_defconfig" file or "Makefile" file in the patch file
$ bitbake linux-imx -c cleansstate
to build kernel image
$ bitbake linux-imx

Creating boot-up on-board flash from prebuilt image

To create one boot-up SD card

Perform the following command in terminal console
$ gunzip -c ${PREBUILT_IMAGE | dd of=${SD_DEVICE} bs=1M
# sync

To transfer whole system to on-board flash

Boot up from SD card
Perform the following commands in debug console
# cd /mk_inand
# ./mksd-linux.sh /dev/mmcblk0
press y followed by Enter, if following message shows up:
RTENOTITLE
While "[Done]" shows up means the transferring is finished.

Creating boot-up on-board flash from built sdcard image

To create one boot-up SD card

Perform the following commands in terminal console
$ pushd ${BSP_HOME}/${BDIR}/tmp/deploy/images/${MC}
$ dd if=${SDCARD_IMAGE} of=${SD_DEVICE} bs=1M
$ sync
$ popd

To transfer whole system to on-board flash

Boot up from SD card
Insert USB stick that contains ${SDCARD_IMAGE}, USB stick will be auto mounted to /run/media/sda1.
Perform the following commands in debug console
# umount /dev/mmcblk0p?
# cd /run/media/sda1
# dd if=${SDCARD_IMAGE} of=/dev/mmcblk0 bs=4M conv=fsync
# P2START=$(fdisk -lu | grep mmcblk0p2 | awk '{print $2}')
# echo -e "d\n2\nn\np\n2\n${P2START}\n\nw\n" | fdisk -u /dev/mmcblk0
# umount /dev/mmcblk0p2
# e2fsck -f -y /dev/mmcblk0p2
# resize2fs /dev/mmcblk0p2
# poweroff

Debug console information

If you want to see debug message from device, you need to prepare for hardware device and software tool.

Preparing for hardware device

  • The following URL provides information about the debug port slot and the debug port line for each device

Debug Port Information

Preparing for software tool

  • You need to prepare the debug console tool. For example: "minicom" tool or "putty" tool.
  • Baud rate: 115200

Customization

Package addition

To add tcf-agent & openssh-sftp-server

Navigate to the directory where fsl-image-adv.inc located
$ cd ${BSP_HOME}/sources/meta-advantech/recipes-fsl/images
Add following line to fsl-image-adv.inc
IMAGE_INSTALL += " tcf-agent openssh-sftp-server "
Continue an exist build environment and build sdcard image

To add chromium browser

Navigate to the directory where local.conf located
$ cd ${BSP_HOME}/${BDIR}/conf
Add the following three lines to local.conf
CORE_IMAGE_EXTRA_INSTALL += "chromium libexif"
LICENSE_FLAGS_WHITELIST="commercial"
PNBLACKLIST[chromium] = ""
Continue an exist build environment and build sdcard image

Setting up SDK

Please follow the section,To build toolchain installer, to build one toolchain installer
Perform the following command in terminal console
$ cd ${BSP_HOME}/${BDIR}/tmp/deploy/sdk
$ sudo ./fsl-imx-x11-glibc-x86_64-meta-toolchain-qt5-cortexa9hf-vfp-neon-toolchain-${KERNEL}-1.1.0.sh
Enter new installed directory or just press Enter to use default directory.
While Proceed[y/n]? shows up, please enter the correct one.
Waiting for the SDK installed (while the following messages show up completely)
RTENOTITLE

Setting up cross compiling environment

SDK has been set up (ref.Setting up SDK)
Perform the following command in terminal console
$ source ${TOOLCHAIN}/environment-setup-cortexa9hf-vfp-neon-poky-linux-gnueabi

Building & updating u-boot manually

The cross compiling environment has been set up. (ref. Setting up cross compiling environment)

Copy BSP tarball to Container

Refer to Copy_BSP_tarball_to_Container , copy u-boot tarball to ${WORKSPACE} and back to container change owner & unpack tarball

$ sudo chown adv:adv imx6LBV8210_2017-02-20_uboot-imx6.tgz
$ tar zxvf imx6LBV8210_2017-02-20_uboot-imx6.tgz

Config u-boot

$make ${MX6PROC}${BOARD}${BOARD_REV}_${MEM_SIZE}_defconfig

eg.

$make mx6qrsb4411a1_1G_defconfig

Build u-boot

$make -j4

Replace u-boot

Perform the following command to transfer to exist boot-up SD card
$ dd if=u-boot_crc.bin.crc of=${SD_DEVICE} bs=512 seek=2 conv=fsync
$ dd if=u-boot_crc.bin of=${SD_DEVICE} bs=512 seek=3 conv=fsync
Perform the following command to transfer to on-board flash
$ dd if=u-boot_crc.bin.crc of=/dev/mmcblk0 bs=512 seek=2 conv=fsync
$ dd if=u-boot_crc.bin of=/dev/mmcblk0 bs=512 seek=3 conv=fsync

Building & updating kernel/modules/dtb manually

The cross compiling environment has been set up. (ref. Setting up cross compiling environment)

Copy BSP tarball to Container

Refer to Copy_BSP_tarball_to_Container , copy kernel tarball to ${WORKSPACE} and back to container , or git clone source code form ADVantech github

change owner & unpack tarball

$ sudo chown adv:adv imx6LBV8210_2017-02-20_linux-imx6.tgz
$ tar zxvf imx6LBV8210_2017-02-20_linux-imx6.tgz

git clone source code form ADVANTECH github, and git checkout <tag>

$ git clone https://github.com/ADVANTECH-Corp/linux-imx6.git
$ git checkout imx6LBV8210

Config kernel

Configure linux kernel
$cd linux-imx6
$make distclean
$make imx_v7_adv_defconfig
$make menuconfig

If you get error ,when you "make imx_v7_adv_defconfig" , you need to insatall "libncurses*"

$apt-get install libncurses*

imx_v7_adv_defconfig_error

Build kernel

Start building linux kernel
$ make -j4 zImage
The kernel image file, zImage, is located in the directory "./arch/arm/boot/".
Start building kernel modules
$ make -j4 modules
Copy all modules to a temporary rootfs directory, "~/temp/rootfs"
$ make modules_install INSTALL_MOD_PATH=~/temp/rootfs
Building device tree blob
$ make -j4 ${IMX6PROC}-${BOARD}-${BOARD_REV}.dtb
The device tree blob, ${IMX6PROC}-${BOARD}-${BOARD_REV}.dtb, is located in the directory "./arch/arm/boot/dts/".

Replace kernel & dts

Replace kernel
copy zImage to SDcard or emmc
Replace dtb file
copy dtb file to SDcard or emmc

Improve boot speed

  • Bootloader

1.bootdelay time

We can cancel the bootdelay time by setting bootloader environment value.
setenv bootdelay 0
env save
reset

2.Disable console

Disable debug message output can also improve boot speed

Disable kernel message

setenv mmcargs setenv bootargs console=${console},${baudrate} ${smp} root=${mmcroot} ${bootargs} quiet
env save
reset

Or

Disable debug port
setenv console
env save
reset
  • Rootfs

1.Use smaller rootfs

We can speed up boot times by using a smaller rootfs instead of fsl-image-qt5 image

eg. core-image-full-cmdline, core-image-minimal

bitbake core-image-full-cmdline

It's a console-only image with more full-featured Linux system functionality installed.

And replace the original fsl-image-qt5 rootfs.

  • Services

1. Using update-rc.d remove ,we can remove unnecessary services.

update-rc.d -f <basename> remove

System Recovery

Please refer to Creating boot-up on-board flash from prebuilt image / sdcard image to create a boot-up SD card and transfer whole system to on-board flash.

Package List

In BSP, list all packages which will be built in the image

bitbake -g fsl-image-qt5 && cat pn-depends.dot | grep -v -e '-native' | grep -v digraph | grep -v -e '-image' \
| awk '{print $1}' | sort | uniq

File:Package List

Show all recipes (include non-installed packages)

bitbake -s

File:Package Version List

You can also check ${BDIR}/tmp/deploy/images/${MC}/fsl-image-qt5-${MC}.manifest

It will show the same content with checking by rpm tool on target board.

On target board, list all packages by rpm tool

rpm -qa --root / --dbpath /var/lib/rpm | sort

File:Package List