AFE-E420 Yocto 4.2 User Guide - Revision history

Seven.lin at 09:00, 7 October 2025

2025-10-07T09:00:05Z

Seven.lin at 10:21, 13 June 2025

2025-06-13T10:21:10Z

Seven.lin at 09:06, 13 June 2025

2025-06-13T09:06:42Z

Seven.lin at 07:17, 13 June 2025

2025-06-13T07:17:38Z

Seven.lin at 06:52, 13 June 2025

2025-06-13T06:52:26Z

Seven.lin at 06:27, 13 June 2025

2025-06-13T06:27:25Z

Seven.lin at 02:04, 13 June 2025

2025-06-13T02:04:30Z

Seven.lin at 02:03, 13 June 2025

2025-06-13T02:03:47Z

Seven.lin at 10:48, 12 June 2025

2025-06-12T10:48:25Z

Seven.lin: Created page with "
TBD
"

2025-06-12T05:52:57Z

Created page with "<p>TBD</p>"

New page

← Older revision		Revision as of 09:00, 7 October 2025
Line 77:		Line 77:

	Power off and set SW1 to Pin1 OFF and Pin2 ON for booting into eMMC.		Power off and set SW1 to Pin1 OFF and Pin2 ON for booting into eMMC.
		+	(The default password is 12345678)

	== '''系統使用方法 (System Operating Method)''' ==		== '''系統使用方法 (System Operating Method)''' ==

@@ Line 76: / Line 76: @@
 ::<code># gunzip -c '''<span style="color:#7030a0">${IMAGE.GZ}</span>''' | dd of=<span style="color:#7030a0">'''${eMMC_DEVICE}'''</span> bs=1M status=progress</code>
-Power off and set SW1 to Pin1 OFF and Pin2 for booting into eMMC.
+Power off and set SW1 to Pin1 OFF and Pin2 ON for booting into eMMC.
 == '''系統使用方法 (System Operating Method)''' ==

@@ Line 107: / Line 107: @@
 | [[AFE-E420_POE_PWR1|POE_PWR1]]
 | POE power connector
 |-
 | [[AFE-E420_USB|USB]]
@@ Line 149: / Line 146: @@
 | [[AFE-E420_SD_CARD1|SD_CARD1]]
 | SD card connector
 |}

@@ Line 95: / Line 95: @@
 | [[AFE-E420_AMP1|AMP1]]
 | Speaker connector
 |-
 | [[AFE-E420_AUDIO1|AUDIO1]]

@@ Line 105: / Line 105: @@
 | COM port connector
 |-
-| [[AFE-E420_DCIN1|DCIN1]]
+| [[AFE-E420_CN15|CN15]]
 | DC power input connector
 |-

← Older revision		Revision as of 06:27, 13 June 2025
Line 79:		Line 79:

	== '''系統使用方法 (System Operating Method)''' ==		== '''系統使用方法 (System Operating Method)''' ==
		+	{\| border="1" cellpadding="1" cellspacing="1" style="width: 500px;"
		+	\|-
		+	\| '''Connector List'''
		+	\|
		+	\|-
		+	\| '''Position'''
		+	\| '''Description'''
		+	\|-
		+	\| [[AFE-E420_Control_Pilot\|Control Pilot]]
		+	\| Control pilot 1 and control pilot 2
		+	\|-
		+	\| [[AFE-E420_CN16\|CN16]]
		+	\| RTD temperature sensor connector
		+	\|-
		+	\| [[AFE-E420_AMP1\|AMP1]]
		+	\| Speaker connector
		+	\|-
		+	\| [[AFE-E420_J1\|J1]]
		+	\| USB switch jumper
		+	\|-
		+	\| [[AFE-E420_AUDIO1\|AUDIO1]]
		+	\| Audio internal connector
		+	\|-
		+	\| [[AFE-E420_COM\|COM]]
		+	\| COM port connector
		+	\|-
		+	\| [[AFE-E420_DCIN1\|DCIN1]]
		+	\| DC power input connector
		+	\|-
		+	\| [[AFE-E420_POE_PWR1\|POE_PWR1]]
		+	\| POE power connector
		+	\|-
		+	\| [[AFE-E420_LAN\|LAN]]
		+	\| LAN1 and LAN2, RJ-45 connector
		+	\|-
		+	\| [[AFE-E420_USB\|USB]]
		+	\| USB 2.0 connector
		+	\|-
		+	\| [[AFE-E420_OTG1\|OTG1]]
		+	\| USB OTG connector
		+	\|-
		+	\| [[AFE-E420_FAN\|FAN]]
		+	\| FAN1 and FAN2, FAN internal connector
		+	\|-
		+	\| [[AFE-E420_CAN\|CAN]]
		+	\| CAN bus connector
		+	\|-
		+	\| [[AFE-E420_CN1\|CN1]]
		+	\| Front panel internal connector
		+	\|-
		+	\| [[AFE-E420_GPIO\|GPIO]]
		+	\| GPIO connector
		+	\|-
		+	\| [[AFE-E420_I2C\|I2C]]
		+	\| I2C connector
		+	\|-
		+	\| [[AFE-E420_LVDS_BKLT_PWR\|LVDS_BKLT_PWR]]
		+	\| Panel inverter connector
		+	\|-
		+	\| [[AFE-E420_LVDS\|LVDS]]
		+	\| LVDS connector
		+	\|-
		+	\| [[AFE-E420_BAT1\|BAT1]]
		+	\| RTC battery connector
		+	\|-
		+	\| [[AFE-E420_M2E_CN1\|M2E_CN1]]
		+	\| M.2 E-key connector
		+	\|-
		+	\| [[AFE-E420_M2B_CN1\|M2B_CN1]]
		+	\| M.2 B-key connector
		+	\|-
		+	\| [[AFE-E420_SD_CARD1\|SD_CARD1]]
		+	\| SD card connector
		+	\|-
		+	\| [[AFE-E420_SIM1\|SIM1]]
		+	\| NANO SIM
		+	\|}

−	*[[AFE-E420_DC-IN\|'''DC-IN''']]

	== '''Linux BSP編譯方法 (Linux BSP Compile Method)''' ==		== '''Linux BSP編譯方法 (Linux BSP Compile Method)''' ==

@@ Line 8: / Line 8: @@
 *Supports Yocto BSP
 === '''產品官網連結 (Product official website link)''' ===
-[https://www.advantech.com.cn/zh-cn/products/8a011db5-af04-48dc-bcd5-75a4bdd38c4d/afe-e420/mod_389771a6-53e3-46e8-8d18-2357b457c707 AFE-E420 - 研华]
+[https://www.advantech.com.cn/zh-cn/products/8a011db5-af04-48dc-bcd5-75a4bdd38c4d/afe-e420/mod_389771a6-53e3-46e8-8d18-2357b457c707 AFE-E420 - 研華]
 == '''硬體介面說明 (Hardware Interface Introduction)''' ==

@@ Line 1: / Line 1: @@
+== '''產品介紹 (Product Introduction )''' ==
-== '''产品特性 (Features)''' ==
+=== '''產品特性 (Product Features)''' ===
 *NXP i.MX 93 with Dual Arm® Cortex-A55 1.7 GHz
 *Onboard 2GB LPDDR4 memory and 16GB eMMC
@@ Line 8: / Line 7: @@
 *Expansion: M.2 E-Key, M.2 B-Key
 *Supports Yocto BSP
+=== '''產品官網連結 (Product official website link)''' ===
 [https://www.advantech.com.cn/zh-cn/products/8a011db5-af04-48dc-bcd5-75a4bdd38c4d/afe-e420/mod_389771a6-53e3-46e8-8d18-2357b457c707 AFE-E420 - 研华]
-== '''板卡布局和尺寸 (AFE-E420 Layout and Dimension)''' ==
+== '''硬體介面說明 (Hardware Interface Introduction)''' ==
-=== '''板卡布局图 (AFE-E420 Layout)''' ===
+=== '''佈局 (Layout)''' ===
 [[File:AFE-E420 Board Layout (Top).jpg|800x600px|AFE-E420 Board Layout (Top)]] [[File:AFE-E420 Board Layout (Bottom).jpg|800x600px|AFE-E420 Board Layout (Bottom)]]
-=== '''板卡尺寸 (AFE-E420 Dimension)''' ===
+=== '''尺寸 (Dimension)''' ===
 [[File:AFE-E420 Board Dimension (Top).jpg|800x600px|AFE-E420 Board Dimension (Top)]] [[File:AFE-E420 Board Dimension (Side).jpg|800x600px|AFE-E420 Board Dimension (Side)]] [[File:AFE-E420 Board Dimension (Bottom).jpg|800x600px|AFE-E420 Board Dimension (Bottom)]]
-=== '''引脚定义 (Jumper Function Definitions)''' ===
+=== '''引腳定義 (Jumper Function Definitions)''' ===
 {| border="1" cellpadding="1" cellspacing="1" style="width: 500px;"
@@ Line 55: / Line 52: @@
 |}
-== '''快速入门 (Quick Start)''' ==
+== '''快速入門 (Quick Start)''' ==
-=== '''系统下载 (OS Download)''' ===
+[https://ess-wiki.advantech.com.tw/view/AFE-E420_Yocto4.2_Release_Note Download Yocto 4.2 for AFE-E420]
-[https://ess-wiki.advantech.com.tw/view/AFE-E420_Yocto4.2_Release_Note Download Yocto 4.2 for AFE-E420] '''For BSP files, Please contact us.'''
+'''For BSP files, Please contact us.'''
-=== '''Yocto烧录方法 (Yocto Flash eMMC Method)''' ===
+=== '''Yocto燒錄方法 (Yocto Flash eMMC Method)''' ===
 Create a boot-up SD card using the dd command.
@@ Line 79: / Line 78: @@
 Power off and set SW1 to Pin1 OFF and Pin2 for booting into eMMC.
-== '''板卡接口 (AFE-E420 Connectors)''' ==
+== '''系統使用方法 (System Operating Method)''' ==
 *[[AFE-E420_DC-IN|'''DC-IN''']]
-== '''Linux BSP编译方法 (Linux BSP Compile Method)''' ==
+== '''Linux BSP編譯方法 (Linux BSP Compile Method)''' ==
 [https://ess-wiki.advantech.com.tw/view/IoTGateway/BSP/Linux/iMX93/Yocto_LBVD_User_Guide Linux_BSP_User_Guide_for_AFE-E420_Yocto4.2]
 <div id="gtx-trans" style="position: absolute; left: 121px; top: 13467.2px;"><div class="gtx-trans-icon">&nbsp;</div> </div>

← Older revision		Revision as of 10:48, 12 June 2025
Line 1:		Line 1:
−	<p>~~TBD~~</p>	+
		+	== '''产品特性 (Features)''' ==
		+
		+	*NXP i.MX 93 with Dual Arm® Cortex-A55 1.7 GHz
		+	*Onboard 2GB LPDDR4 memory and 16GB eMMC
		+	*Single Display: LVDS or HDMI
		+	*Dual GbE, 3 USB2.0, 6 RS-232/422/485, 4 CAN-FD, 2 PLC QCA7006, RTD 4-Channel
		+	*Expansion: M.2 E-Key, M.2 B-Key
		+	*Supports Yocto BSP
		+
		+	=== '''产品官网链接 (Product official website link)''' ===
		+
		+	[https://www.advantech.com.cn/zh-cn/products/8a011db5-af04-48dc-bcd5-75a4bdd38c4d/afe-e420/mod_389771a6-53e3-46e8-8d18-2357b457c707 AFE-E420 - 研华]
		+
		+	== '''板卡布局和尺寸 (AFE-E420 Layout and Dimension)''' ==
		+
		+	=== '''板卡布局图 (AFE-E420 Layout)''' ===
		+
		+	[[File:AFE-E420 Board Layout (Top).jpg\|800x600px\|AFE-E420 Board Layout (Top)]] [[File:AFE-E420 Board Layout (Bottom).jpg\|800x600px\|AFE-E420 Board Layout (Bottom)]]
		+
		+	=== '''板卡尺寸 (AFE-E420 Dimension)''' ===
		+
		+	[[File:AFE-E420 Board Dimension (Top).jpg\|800x600px\|AFE-E420 Board Dimension (Top)]] [[File:AFE-E420 Board Dimension (Side).jpg\|800x600px\|AFE-E420 Board Dimension (Side)]] [[File:AFE-E420 Board Dimension (Bottom).jpg\|800x600px\|AFE-E420 Board Dimension (Bottom)]]
		+
		+	=== '''引脚定义 (Jumper Function Definitions)''' ===
		+
		+	{\| border="1" cellpadding="1" cellspacing="1" style="width: 500px;"
		+	\|-
		+	\| '''Jumper List'''
		+	\|
		+	\|-
		+	\| '''Position'''
		+	\| '''Description'''
		+	\|-
		+	\| [[AFE-E420_LVDS_BKLT_SLT\|LVDS_BKLT_SLT]]
		+	\| Backlight Voltage Selection Jumper
		+	\|-
		+	\| [[AFE-E420_LVDS_VDD_SLT\|LVDS_VDD_SLT]]
		+	\| Panel Voltage Selection Jumper
		+	\|-
		+	\| [[AFE-E420_AT1\|AT1]]
		+	\| Auto Power On Selection Jumper
		+	\|-
		+	\| [[AFE-E420_J1\|J1]]
		+	\| USB Switch Jumper
		+	\|-
		+	\| [[AFE-E420_SW1\|SW1]]
		+	\| BOOT Selection Switch
		+	\|-
		+	\| [[AFE-E420_CAN_SW1\|CAN_SW1]]
		+	\| CAN3 Terminal Switch
		+	\|-
		+	\| [[AFE-E420_CAN_SW2\|CAN_SW2]]
		+	\| CAN4 Terminal Switch
		+	\|}
		+
		+	== '''快速入门 (Quick Start)''' ==
		+
		+	=== '''系统下载 (OS Download)''' ===
		+
		+	[https://ess-wiki.advantech.com.tw/view/AFE-E420_Yocto4.2_Release_Note Download Yocto 4.2 for AFE-E420] '''For BSP files, Please contact us.'''
		+
		+	=== '''Yocto烧录方法 (Yocto Flash eMMC Method)''' ===
		+
		+	Create a boot-up SD card using the dd command.
		+
		+	:
		+	::<code># gunzip -c '''<span style="color:#7030a0">${IMAGE.GZ}</span>''' \| dd of=<span style="color:#7030a0">'''${SD_DEVICE}'''</span> bs=1M status=progress</code>
		+
		+	Copy the image.gz into SD card and install on AFE-E420.
		+
		+	Set SW1 to Pin1 ON and Pin2 ON for booting into SD card.
		+
		+	Execute the restore command again, but target the eMMC.
		+
		+	:
		+	::<code># gunzip -c '''<span style="color:#7030a0">${IMAGE.GZ}</span>''' \| dd of=<span style="color:#7030a0">'''${eMMC_DEVICE}'''</span> bs=1M status=progress</code>
		+
		+	Power off and set SW1 to Pin1 OFF and Pin2 for booting into eMMC.
		+
		+	== '''板卡接口 (AFE-E420 Connectors)''' ==
		+
		+	*[[AFE-E420_DC-IN\|'''DC-IN''']]
		+
		+	== '''Linux BSP编译方法 (Linux BSP Compile Method)''' ==
		+
		+	[https://ess-wiki.advantech.com.tw/view/IoTGateway/BSP/Linux/iMX93/Yocto_LBVD_User_Guide Linux_BSP_User_Guide_for_AFE-E420_Yocto4.2]
		+	<div id="gtx-trans" style="position: absolute; left: 121px; top: 13467.2px;"><div class="gtx-trans-icon"> </div> </div>