Rex.lin: /* Build yocto images */

2025-11-28T05:09:54Z

‎Build yocto images

Rex.lin: /* Download BSP */

2025-11-28T05:08:30Z

‎Download BSP

Rex.lin: Created page with " = Introduction = This document describes how to work with the RISC and Qualcomm LE GA1.1 Board Support Package (BSP) release. == Yocto Version == Yocto 4.0.18 == Kernel V..."

2025-11-28T02:35:54Z

Created page with " = Introduction = This document describes how to work with the RISC and Qualcomm LE GA1.1 Board Support Package (BSP) release. == Yocto Version == Yocto 4.0.18 == Kernel V..."

New page

= Introduction =

This document describes how to work with the RISC and Qualcomm LE GA1.1 Board Support Package (BSP) release.

== Yocto Version ==

Yocto 4.0.18

== Kernel Version ==

Kernel 6.6.28

== Meta Build ID ==

QCM6490.LE.1.0-00218-STD.PROD-1

= Host machine requirements =

== OS ==

Ubuntu 20.04 or Ubuntu 22.04

== CPU ==

Intel Core-i7 Processor (>= 8 cores)

== RAM ==

16+ GB RAM 

== Disk ==

350 GB free disk space (more is recommended and SSD is suggested for better performance)

= Docker Install and BSP Download =

== Install Docker Engine on your platform ==

Please refer to [https://docs.docker.com/engine/installation/ Docker Installation Guide] for details 

== Pull docker images ==
<pre>$ sudo docker pull advrisc/u20.04-qcslbv2:latest</pre>

== Run docker example ==
<pre>$ mkdir -p /home/bsp/myLinux
$ sudo docker run --privileged -it --name qclinux -v /home/bsp/myLinux:/home/adv/BSP:rw advrisc/u20.04-qcslbv2 /bin/bash
adv@7cc0fa834366:~$ sudo chown adv:adv -R BSP
</pre>

== Download BSP ==

'''You need to get the ADV_GIT_TOKEN by contacting the PM or AE of MIO-5355.'''
<pre>$ cd /home/adv/BSP
$ git config --global credential.helper 'store --file ~/.my-credentials'
$ echo "https://AIM-Linux:${ADV_GIT_TOKEN}@dev.azure.com" > ~/.my-credentials</pre>

Refer to Release image URL: [[AIM-Linux/BSP/Qualcomm/Linux_Yocto_OS_Release_note/LE1.1/Internal|OS Support List(LE1.1 based on Yocto4.0.18)]] , Official version "'''mio5355a1_yl01101_k0606028_q6490_08g.xml" '''is taken as an example :
<pre>$ repo init -u https://dev.azure.com/AIM-Linux/risc_qcs_linux_le_1.1/_git/manifest -b main -m mio5355a1_yl01101_k0606028_q6490_08g.xml
$ repo sync -c -j${YOUR_CPU_CORE_NUM}
$ cp layers/meta-advantech/conf/machine/qcm6490.conf layers/meta-qcom-hwe/conf/machine/qcm6490.conf
$ cp layers/meta-advantech/recipes-sdk/files/content_config.json layers/meta-qcom-robotics-sdk/recipes-sdk/files/content_config.json
$ cp layers/meta-advantech/recipes-core/base-files/base-files/fstab layers/poky/meta/recipes-core/base-files/base-files/fstab</pre>

If you want to get latest bsp
<pre>$ repo init -u https://dev.azure.com/AIM-Linux/risc_qcs_linux_le_1.1/_git/manifest -b main -m adv-6.6.28-QLI.1.1-Ver.1.1_robotics-product-sdk-1.1.xml
$ repo sync -c -j${YOUR_CPU_CORE_NUM}
$ cp layers/meta-advantech/conf/machine/qcm6490.conf layers/meta-qcom-hwe/conf/machine/qcm6490.conf
$ cp layers/meta-advantech/recipes-sdk/files/content_config.json layers/meta-qcom-robotics-sdk/recipes-sdk/files/content_config.json
$ cp layers/meta-advantech/recipes-core/base-files/base-files/fstab layers/poky/meta/recipes-core/base-files/base-files/fstab</pre>

'''You can check the download BSP as the following.'''

[[File:LE1.1 BSP Folder.jpg|400px|LE1.1 BSP Folder.jpg]]

 

 

== Get and Unzip the Downloads Files ==

1. Private Yocto downloads file '''(Must to do) ''': [https://www.dropbox.com/scl/fi/uagtd3c57cxirgl2imdwb/downloads_qcs6490_le1.1_private.tar.gz?rlkey=yriz1qlhzem5pp3jhytpmncov&st=46t6y0u3&dl=0 [ downloads_qcs6490_le1.1_private.tar.gz ]]

The size of downloads_qcs6490_le1.1_private.tar.gz is 277854168 byte (271,342 KB)

The md5sum of downloads_qcs6490_le1.1_private.tar.gz is 57692f7262a68b21a5885e8d72299d78

'''You need to get the PASSWORD by contacting the PM or AE of project.'''
<pre>$ cd /home/adv/BSP
$ openssl des3 -d -k ${PASSWORD} -salt -pbkdf2 -in downloads_qcs6490_le1.1_private.tar.gz -out downloads_qcs6490_le1.1_private_decrypt.tar.gz
$ tar -zxvf downloads_qcs6490_le1.1_private_decrypt.tar.gz
</pre>

 

2. Public Yocto downloads file: [https://www.dropbox.com/scl/fi/vsagx8s9t1i5qs43b8glk/downloads_qcs6490_le1.1_public.tar.gz?rlkey=6mnp67jal0kv722elc3s6e25k&st=ehvpxftu&dl=0 [ downloads_qcs6490_le1.1_public.tar.gz ]]

The size of downloads_qcs6490_le1.1_public.tar.gz is 31810989229 byte (31,065,420 KB)

The md5sum of downloads_qcs6490_le1.1_public.tar.gz is 870323bca740ca9af5322c6553a749ac
<pre>$ cd /home/adv/BSP
$ tar -zxvf downloads_qcs6490_le1.1_public.tar.gz
</pre>

= Build Instructions =

== Source env ==

'''For the "Build All images", "Build All Images individually" and "Build yocto images", you need to do the "Source env".'''
<pre>$ source scripts/env.sh</pre>

== Build All Images ==
<pre>$ scripts/build_release.sh -all</pre>

*'''Output ufs images: build-qcom-robotics-ros2-humble/tmp-glibc/deploy/images/qcm6490/qcom-robotics-full-image'''
*'''Output emmc images: build-qcom-robotics-ros2-humble/tmp-glibc/deploy/images/qcm6490/qcom-robotics-full-image-emmc'''

 

== Build All Images individually ==

==== 1. Build ADSP Image ====

After building the ADSP, you need to build the "6. Generate Firmware Prebuilds" to package new firmware prebuild files.
<pre>$ scripts/build_release.sh -adsp</pre>

==== 2. Build AOP Image ====

After building the AOP, you need to build the "6. Generate Firmware Prebuilds" to package new firmware prebuild files.
<pre>$ scripts/build_release.sh -aop</pre>

==== 3. Build CDSP Image ====

After building the CDSP, you need to build the "6. Generate Firmware Prebuilds" to package new firmware prebuild files.
<pre>$ scripts/build_release.sh -cdsp</pre>

==== 4. Build BOOT(XBL) Image ====

After building the BOOT(XBL), you need to build the "6. Generate Firmware Prebuilds" to package new firmware prebuild files.
<pre>$ scripts/build_release.sh -boot</pre>

==== 5. Build TZ Image ====

After building the TZ, you need to build the "6. Generate Firmware Prebuilds" to package new firmware prebuild files.
<pre>$ scripts/build_release.sh -tz</pre>

==== 6. Generate Firmware Prebuilds ====
<pre>$ scripts/build_release.sh -common</pre>

'''Output firmware prebuild files:'''

'''amss/QCM6490.LE.1.0/common/build/ufs/bin/QCM6490_bootbinaries.zip'''

'''amss/QCM6490.LE.1.0/common/build/ufs/bin/QCM6490_dspso.zip'''

'''amss/QCM6490.LE.1.0/common/build/ufs/bin/QCM6490_fw.zip'''

==== 7. Build YOCTO Image ====
<pre>$ scripts/build_release.sh -yocto</pre>

== Build yocto images ==
<pre>$ cd /home/adv/BSP
$ source scripts/env.sh
$ MACHINE=qcm6490 DISTRO=qcom-robotics-ros2-humble source setup-robotics-environment
$ ../qirp-build qcom-robotics-full-image</pre>

For the qcsLBV11026 version:
<pre>$ cd /home/adv/BSP
$ source scripts/env.sh
$ MACHINE=qcm6490 DISTRO=qcom-wayland source setup-environment
$ devtool modify qps615
$ bitbake qcom-multimedia-image
</pre>

← Older revision		Revision as of 05:09, 28 November 2025
Line 151:		Line 151:
	==== 7. Build YOCTO Image ====		==== 7. Build YOCTO Image ====
	<pre>$ scripts/build_release.sh -yocto</pre>		<pre>$ scripts/build_release.sh -yocto</pre>
−
−	~~== Build yocto images ==~~
−	~~<pre>$ cd /home/adv/BSP~~
−	~~$ source scripts/env.sh~~
−	~~$ MACHINE=qcm6490 DISTRO=qcom-robotics-ros2-humble source setup-robotics-environment~~
−	~~$ ../qirp-build qcom-robotics-full-image</pre>~~
−
−	~~For the qcsLBV11026 version:~~
−	~~<pre>$ cd /home/adv/BSP~~
−	~~$ source scripts/env.sh~~
−	~~$ MACHINE=qcm6490 DISTRO=qcom-wayland source setup-environment~~
−	~~$ devtool modify qps615~~
−	~~$ bitbake qcom-multimedia-image~~
−	~~</pre>~~

@@ Line 58: / Line 58: @@
 Refer to Release image URL: [[AIM-Linux/BSP/Qualcomm/Linux_Yocto_OS_Release_note/LE1.1/Internal|OS Support List(LE1.1 based on Yocto4.0.18)]] , Official version "'''mio5355a1_yl01101_k0606028_q6490_08g.xml"&nbsp;'''is taken as&nbsp;an example&nbsp;:
 <pre>$ repo init -u https://dev.azure.com/AIM-Linux/risc_qcs_linux_le_1.1/_git/manifest -b main -m mio5355a1_yl01101_k0606028_q6490_08g.xml
 $ repo sync -c -j${YOUR_CPU_CORE_NUM}
 $ cp layers/meta-advantech/conf/machine/qcm6490.conf layers/meta-qcom-hwe/conf/machine/qcm6490.conf

AIM-Linux/BSP/Qualcomm/RISC QCS Yocto LE1.1 MIO-5355 - Revision history

Rex.lin: /* Build yocto images */

Rex.lin: /* Download BSP */

Rex.lin: Created page with " = Introduction = This document describes how to work with the RISC and Qualcomm LE GA1.1 Board Support Package (BSP) release. == Yocto Version == Yocto 4.0.18 == Kernel V..."