AIMB 294 Development - Revision history

Richard.chiang at 08:51, 22 December 2025

2025-12-22T08:51:25Z

Richard.chiang at 08:17, 22 December 2025

2025-12-22T08:17:22Z

Ray.su: Created page with "==Attention== ===Account & Password=== Account number

 ubuntu

In device used "sudo" or "sudo su" to root. Password required.

 ubuntu

=== Power off and..."

2025-10-29T02:46:17Z

Created page with "==Attention== ===Account & Password=== Account number <pre> ubuntu </pre> In device used "sudo" or "sudo su" to root. Password required. <pre> ubuntu </pre> === Power off and..."

New page

==Attention==
===Account & Password===
Account number
<pre>
ubuntu
</pre>
In device used "sudo" or "sudo su" to root.
Password required.
<pre>
ubuntu
</pre>

=== Power off and restart ===
Cold reboot the device.

== Bootloader Version ==
Check device boot up in debugport log
 
[[File:Aimb-294-uefi.jpg|800px|border]]

== Burnin ==
[[ASR_A702_Burnin|ASR-A702 Burnin]]
<pre>
$ cd /tool
$ sudo Burnin.sh
</pre>

== BootCount ==
=== BootCount tool install ===
In first time please install bootcount tool

<pre>
$ cd /home/ubuntu
$ sudo ./bootCount.sh
</pre>

Default enter the OS 20s will poweroff

=== Boot On Off ===

The boot count message will be printed before log-in. [[File:Air030 bootcount.jpg|200px]] Reset the boot count please remove '''bootCount.tt'''.
<pre>
$ rm bootCount.tt
</pre>

== Tools ==

=== Test Command ===

==== '''GMSL''' ====
===== '''APPROPHO Camera''' =====

Camera type : IMX335
 
HW setting : Camera link to GMSL port
 
[[File:Aimb-294-camera.png|600px|border]]
 
Please install camera driver first
 
Then system needs to reboot to take effect after setting camera interface done
 
Setup driver with GMSL
<pre>
$ cd /tools/approcam/gmsl
$ sudo ./set_approcam_gmsl.sh
</pre>

Preview command
<pre>
$ cd /home/ubuntu
$ sudo ./enable-approcamera.sh
</pre>

← Older revision		Revision as of 08:51, 22 December 2025
Line 47:		Line 47:

	=== Test Command ===		=== Test Command ===
		+
		+	==== '''DIO 8bit''' ====
		+	Hardware setting
		+	<br/>
		+
		+	<br/>
		+	* The TCA9555 is identical to the TCA9535, except for the inclusion of the internal I/O pull-up resistor, which pulls the I/O to a default high when configured as an input and undriven.
		+	Pin table with DIO expander number
		+	<br/>
		+	<br/>Pin1-->704, Pin5-->712
		+	<br/>Pin2-->705, Pin6-->713
		+	<br/>Pin3-->706, Pin7-->714
		+	<br/>Pin4-->707, Pin8-->715
		+	<br/>
		+	For example set Pin1 direction out, value high
		+	<pre>
		+	$ sudo su
		+	# echo 704 > /sys/class/gpio/export
		+	# echo out > /sys/class/gpio/gpio704/direction
		+	# echo 1 > /sys/class/gpio/gpio704/value
		+	</pre>
		+	For example set Pin5 direction in
		+	<pre>
		+	$ sudo su
		+	# echo 712 > /sys/class/gpio/export
		+	# echo in > /sys/class/gpio/gpio712/direction
		+	</pre>

	==== '''GMSL''' ====		==== '''GMSL''' ====

← Older revision		Revision as of 08:17, 22 December 2025
Line 72:		Line 72:
	$ sudo ./enable-approcamera.sh		$ sudo ./enable-approcamera.sh
	</pre>		</pre>
		+
		+	== Reference ==
		+	[[AIMB-294\|AIMB-294]]