AOM-5521 user guide - Revision history

Jems.cheng: /* Linux 燒錄方法 (Linux Flash eMMC Method) */

2025-07-16T06:10:48Z

‎Linux 燒錄方法 (Linux Flash eMMC Method)

Jems.cheng: /* GPIO使用方法(GPIO Operating Method) */

2025-07-16T04:30:36Z

‎GPIO使用方法(GPIO Operating Method)

Jems.cheng: /* 系统下载 (OS Download) */

2025-06-18T01:19:04Z

‎系统下载 (OS Download)

Jems.cheng at 10:16, 26 May 2025

2025-05-26T10:16:12Z

Jems.cheng at 10:11, 26 May 2025

2025-05-26T10:11:48Z

Jems.cheng at 10:07, 26 May 2025

2025-05-26T10:07:59Z

Jems.cheng at 09:57, 26 May 2025

2025-05-26T09:57:14Z

Jems.cheng at 09:54, 26 May 2025

2025-05-26T09:54:46Z

Jems.cheng at 09:47, 26 May 2025

2025-05-26T09:47:32Z

Jems.cheng at 09:36, 26 May 2025

2025-05-26T09:36:18Z

@@ Line 434: / Line 434: @@
 &nbsp;
 === '''Linux&nbsp;燒錄方法 (Linux Flash eMMC Method)''' ===
@@ Line 483: / Line 484: @@
 {| border="1" cellpadding="1" cellspacing="1" style="width:500px;"
 |-
-| ROM-5722
+| AOM-5521
 | &nbsp;
 |-
@@ Line 496: / Line 497: @@
 . 切換開機switch 1:on 2,3,4,5,6:off來設定成從eMMC開機(Change boot switch to "1:on 2,3,4,5,6:off" to boot from eMMC. Reboot system).
 === '''Debug 串口調試 (Debug port Setting)''' ===

@@ Line 744: / Line 744: @@
 <div style="background:#eeeeee;border:1px solid #cccccc;padding:5px 10px;"># ping 8.8.8.8 -I wwan0</div>
 [[File:AOM-5521 4G7.jpg]]
@@ Line 768: / Line 769: @@
 | GPIO1
 | style="width: 233px;" | SD3_CLK__GPIO3_IO_BIT20
-| style="width: 105px;" | &nbsp;
+| style="width: 105px;" | GPIO1_CAM1_PWR#
 | style="width: 107px;" | &nbsp;
 |-
@@ Line 780: / Line 781: @@
 | GPIO3
 | style="width: 233px;" | SD3_DATA0__GPIO3_IO_BIT22
-| style="width: 105px;" | &nbsp;
+| style="width: 105px;" | GPIO3_CAM1_RST#
 | style="width: 107px;" | &nbsp;
 |-
@@ Line 865: / Line 866: @@
 root@imx95aom5521a1: ~# cat /sys/class/gpio/gpio2/value
 </pre>
 === '''Watch Dog測試方法(Watch Dog Test Method)''' ===

@@ Line 423: / Line 423: @@
 = '''快速入门 (Quick Start)''' =
 === '''系统下载 (OS Download)''' ===
@@ Line 433: / Line 434: @@
 &nbsp;
 === '''Linux&nbsp;燒錄方法 (Linux Flash eMMC Method)''' ===

@@ Line 1,008: / Line 1,008: @@
 [[File:AOM-5521 TPM12.jpg]]
@@ Line 1,017: / Line 1,018: @@
 === '''SPI BUS功能測試(SPI BUS Function Test)''' ===
 '''QSPIA (On the SMARC module)'''
@@ Line 1,038: / Line 1,041: @@
 [[File:AOM-5521 SPI5.jpg|RTENOTITLE]]<br/> '''SPI_CN1: Test with ROM-EG70&nbsp;'''<br/> (Need to rework U62 +V_SPI to +V3.3 for ROM-EG70)<br/> (There are two SPI NOR flash on ROM-EG70)
-[[File:AOM-5521 SPI6.jpg]]<br/> '''Dump SPI content:'''
+[[File:AOM-5521 SPI6.jpg|RTENOTITLE]]<br/> '''Dump SPI content:'''
 <div style="background:#eeeeee;border:1px solid #cccccc;padding:5px 10px;"># echo -n $'\x03\x03\x10\x10\x20\x25' > test<br/> # dd if=test of=/dev/mtdblock1<br/> # hexdump -C /dev/mtd1&nbsp;-n 64<br/> or<br/> # dd if=/dev/mtdblock1 bs=1 count=100 | hexdump –C</div>
 '''mtdblock1:'''
-[[File:AOM-5521 SPI7.jpg]]<br/> '''mtdblock2:'''
+[[File:AOM-5521 SPI7.jpg|RTENOTITLE]]<br/> '''mtdblock2:'''
-'''[[File:AOM-5521 SPI8.jpg]]'''
+'''[[File:AOM-5521 SPI8.jpg|RTENOTITLE]]'''
 === '''CANBUS功能測試(CABBUS Test Method)''' ===

@@ Line 1,008: / Line 1,008: @@
 [[File:AOM-5521 TPM12.jpg]]
@@ Line 1,019: / Line 1,020: @@
 '''QSPIA (On the SMARC module)'''
 <div style="background:#eeeeee;border:1px solid #cccccc;padding:5px 10px;"># echo -n $'\x06\x05\x04\x03\x02\x01' > test<br/> # dd if=test of=/dev/mtd0<br/> # hexdump -C /dev/mtd0 -n 64</div>
-[[File:AOM-5521 SPI1.jpg]]
+[[File:AOM-5521 SPI1.jpg|RTENOTITLE]]
 '''SPI0 test: flash (Winboan 25q64) function:'''<br/> Place SPI flash to SPI_BIOS1:<br/> J46, J47, J48: pin12<br/> J24: pin 12<br/> (/dev/mtd1)
-[[File:AOM-5521 SPI2.jpg]]
+[[File:AOM-5521 SPI2.jpg|RTENOTITLE]]
 '''Dump SPI content:'''
 <div style="background:#eeeeee;border:1px solid #cccccc;padding:5px 10px;"># echo -n $'\x06\x05\x04\x03\x02\x01' > test<br/> # dd if=test of=/dev/mtd1<br/> # hexdump -C /dev/mtd1 -n 64</div>
-[[File:AOM-5521 SPI3.jpg]]
+[[File:AOM-5521 SPI3.jpg|RTENOTITLE]]
 '''SPI1(ESPI)(CN10) test: flash (Winboan 25q64) function:'''<br/> (/dev/mtd2)
-[[File:AOM-5521 SPI4.jpg]]
+[[File:AOM-5521 SPI4.jpg|RTENOTITLE]]
 '''Dump SPI content:'''
 <div style="background:#eeeeee;border:1px solid #cccccc;padding:5px 10px;"># echo -n $'\x06\x05\x04\x03\x02\x01' > test<br/> # dd if=test of=/dev/mtd2<br/> # hexdump -C /dev/mtd2 -n 64<br/> or<br/> # dd if=/dev/mtdblock2 bs=1 count=100 | hexdump -C</div>
-[[File:AOM-5521 SPI5.jpg]]<br/> '''SPI_CN1: Test with ROM-EG70&nbsp;'''<br/> (Need to rework U62 +V_SPI to +V3.3 for ROM-EG70)<br/> (There are two SPI NOR flash on ROM-EG70)<br/> '''Dump SPI content:'''
+[[File:AOM-5521 SPI5.jpg|RTENOTITLE]]<br/> '''SPI_CN1: Test with ROM-EG70&nbsp;'''<br/> (Need to rework U62 +V_SPI to +V3.3 for ROM-EG70)<br/> (There are two SPI NOR flash on ROM-EG70)
-<div style="background:#eeeeee;border:1px solid #cccccc;padding:5px 10px;"># echo -n $'\x03\x03\x10\x10\x20\x25' > test<br/> # dd if=test of=/dev/mtdblock1<br/> # hexdump -C /dev/mtd2 -n 64<br/> or<br/> # dd if=/dev/mtdblock1 bs=1 count=100 | hexdump –C</div>
 '''mtdblock1:'''
-<br/> '''mtdblock2:'''
+[[File:AOM-5521 SPI7.jpg]]<br/> '''mtdblock2:'''
 === '''CANBUS功能測試(CABBUS Test Method)''' ===

@@ Line 1,012: / Line 1,012: @@
-'''QSPIA (On the SMARC module)<br/> echo -n $'\x06\x05\x04\x03\x02\x01' > test<br/> dd if=test of=/dev/mtd0<br/> hexdump -C /dev/mtd0 -n 64'''
+=== '''SPI BUS功能測試(SPI BUS Function Test)''' ===
-'''SPI0 test: flash (Winboan 25q64) function:<br/> Place SPI flash to SPI_BIOS1:<br/> J46, J47, J48: pin12<br/> J24: pin 12<br/> (/dev/mtd1)'''
+'''QSPIA (On the SMARC module)'''
-'''Dump SPI content:<br/> echo -n $'\x06\x05\x04\x03\x02\x01' > test<br/> dd if=test of=/dev/mtd1<br/> hexdump -C /dev/mtd1 -n 64'''
+'''SPI0 test: flash (Winboan 25q64) function:'''<br/> Place SPI flash to SPI_BIOS1:<br/> J46, J47, J48: pin12<br/> J24: pin 12<br/> (/dev/mtd1)
-'''SPI1(ESPI) test: flash (Winboan 25q64) function:<br/> (/dev/mtd2)'''
+'''Dump SPI content:'''
-'''Dump SPI content:<br/> echo -n $'\x06\x05\x04\x03\x02\x01' > test<br/> dd if=test of=/dev/mtd2<br/> hexdump -C /dev/mtd2 -n 64<br/> or<br/> dd if=/dev/mtdblock2 bs=1 count=100 | hexdump -C'''
+'''SPI1(ESPI)(CN10) test: flash (Winboan 25q64) function:<br/> (/dev/mtd2)'''
-<br/> '''SPI_CN1: Test with ROM-EG70&nbsp;<br/> (Need to rework U62 +V_SPI to +V3.3 for ROM-EG70)<br/> (There are two SPI NOR flash on ROM-EG70)<br/> Dump SPI content:<br/> echo -n $'\x03\x03\x10\x10\x20\x25' > test<br/> dd if=test of=/dev/mtdblock1<br/> hexdump -C /dev/mtd2 -n 64<br/> or<br/> dd if=/dev/mtdblock1 bs=1 count=100 | hexdump –C<br/> mtdblock1:<br/> mtdblock2:'''
+'''Dump SPI content:'''
 === '''CANBUS功能測試(CABBUS Test Method)''' ===

@@ Line 1,010: / Line 1,010: @@
 === '''CANBUS功能測試(CABBUS Test Method)''' ===
@@ Line 1,017: / Line 1,032: @@
 <br/> '''Set can0 and can1 up:<br/> Check CAN driver'''
 <div style="background:#eeeeee;border:1px solid #cccccc;padding:5px 10px;"># zcat /proc/config.gz | grep FLEXCAN</div>
-[[File:AOM-5521 CANBUS1.jpg]]
+[[File:AOM-5521 CANBUS1.jpg|RTENOTITLE]]
 <div style="background:#eeeeee;border:1px solid #cccccc;padding:5px 10px;"># ip link set can0 up type can bitrate 12500<br/> # ifconfig can0 up<br/> # ip link set can1 up type can bitrate 12500<br/> # ifconfig can1 up<br/> (candump can0/1)(cansend can0/1)<br/> # candump can0 & candump can1 &<br/> # cansend can0 1F334455#1122334455667788<br/> # cansend can1 1F334455#1122334455667788</div>
-[[File:AOM-5521 CANBUS2.jpg]]
+[[File:AOM-5521 CANBUS2.jpg|RTENOTITLE]]
 '''CAN FD:'''
 <div style="background:#eeeeee;border:1px solid #cccccc;padding:5px 10px;"># ip link set can0 up type can bitrate 1000000 dbitrate 8000000 fd on<br/> # ip link set can1 up type can bitrate 1000000 dbitrate 8000000 fd on<br/> # ifconfig can0 up<br/> # ifconfig can1 up<br/> # candump can0 & candump can1 &<br/> # cansend can0 123##300112233445566778899aabbccddeeff<br/> # cansend can1 123##300112233445566778899aabbccddeeff</div>
-[[File:AOM-5521 CANBUS3.jpg]]
+[[File:AOM-5521 CANBUS3.jpg|RTENOTITLE]]
 === '''MIPI CS功能測試(MIPI CSI Test Method)''' ===

@@ Line 1,009: / Line 1,009: @@
 [[File:AOM-5521 TPM12.jpg]]
 === '''MIPI CS功能測試(MIPI CSI Test Method)''' ===
@@ Line 1,017: / Line 1,032: @@
 <div style="background:#eeeeee;border:1px solid #cccccc;padding:5px 10px;"># media-ctl -l "'ov5640 2-003c':0 ->'csidev-4ad30000.csi':0 [1]"<br/> # media-ctl -V "'ov5640 2-003c':0 [fmt: UYVY8_1X16/1920x1080 field:none]"<br/> # media-ctl -V "'csidev-4ad30000.csi':0 [fmt: UYVY8_1X16/1920x1080 field:none]"<br/> # media-ctl -V "'crossbar':2 [fmt: UYVY8_1X16/1920x1080 field:none]"<br/> # media-ctl -V "'mxc_isi.0':0 [fmt: UYVY8_1X16/1920x1080 field:none]"<br/> # media-ctl -V "'mxc_isi.2':0 [fmt: UYVY8_1X16/1920x1080 field:none]"<br/> # media-ctl -V "'mxc_isi.3':0 [fmt: UYVY8_1X16/1920x1080 field:none]"<br/> # media-ctl -V "'mxc_isi.4':0 [fmt: UYVY8_1X16/1920x1080 field:none]"<br/> # media-ctl -V "'mxc_isi.5':0 [fmt: UYVY8_1X16/1920x1080 field:none]"<br/> # media-ctl -V "'mxc_isi.6':0 [fmt: UYVY8_1X16/1920x1080 field:none]"<br/> # media-ctl -V "'mxc_isi.7':0 [fmt: UYVY8_1X16/1920x1080 field:none]"</div>
 '''OV5640 Preview:'''
-<div style="background:#eeeeee;border:1px solid #cccccc;padding:5px 10px;"># gst-launch-1.0 v4l2src device=/dev/video0 ! 'video/x-raw,width=1920,height=1080' ! autovideosink<br/> (Check the HDMI can preview the image)</div>
+<div style="background:#eeeeee;border:1px solid #cccccc;padding:5px 10px;"># gst-launch-1.0 v4l2src device=/dev/video0&nbsp;! 'video/x-raw,width=1920,height=1080'&nbsp;! autovideosink<br/> (Check the HDMI can preview the image)</div>
 '''遠程訪問及文件傳輸(Remote Access and File Transimmion)'''