DS 015 Development - Revision history

Ray.su at 09:15, 3 October 2025

2025-10-03T09:15:07Z

2025-09-10T01:39:06Z

2025-08-28T06:06:20Z

‎Audio

2025-08-28T05:57:59Z

2025-08-25T01:51:28Z

2025-08-22T05:23:49Z

2025-08-15T09:29:22Z

2025-08-15T09:26:07Z

2025-08-15T09:19:10Z

2025-08-15T07:43:44Z

@@ Line 227: / Line 227: @@
 <br/> COM1_SW1 ON-OFF-ON-OFF
 <pre>
-stty -F /dev/ttyTHS1 speed 115200
+$ sudo su
-cat /dev/ttyTHS1 &
+# stty -F /dev/ttyTHS1 speed 115200
-echo "1234" > /dev/ttyTHS1
+# cat /dev/ttyTHS1 &
 </pre>
@@ Line 235: / Line 236: @@
 <br/> COM1_SW1 ON-OFF-ON-OFF
 <pre>
-stty -F /dev/ttyTHS1 speed 115200
+$ sudo su
-cat /dev/ttyTHS1 &
+# stty -F /dev/ttyTHS1 speed 115200
-echo "1234" > /dev/ttyTHS1
+# cat /dev/ttyTHS1 &
 </pre>

@@ Line 112: / Line 112: @@
 Line-Out : Codec Mixer Controls
 <pre>
-amixer -c APE cset name="I2S1 Mux" 0
+$ amixer -c APE cset name="I2S1 Mux" 0
-amixer -c APE cset name="I2S2 Mux" "ADMAIF1"
+$ amixer -c APE cset name="I2S2 Mux" "ADMAIF1"
-amixer -c APE cset name="CVB-RT DAC MIXL INF1 Switch" "on"
+$ amixer -c APE cset name="CVB-RT DAC MIXL INF1 Switch" "on"
-amixer -c APE cset name="CVB-RT DAC MIXR INF1 Switch" "on"
+$ amixer -c APE cset name="CVB-RT DAC MIXR INF1 Switch" "on"
-amixer -c APE cset name="CVB-RT Stereo DAC MIXL DAC L1 Switch" "on"
+$ amixer -c APE cset name="CVB-RT Stereo DAC MIXL DAC L1 Switch" "on"
-amixer -c APE cset name="CVB-RT Stereo DAC MIXR DAC R1 Switch" "on"
+$ amixer -c APE cset name="CVB-RT Stereo DAC MIXR DAC R1 Switch" "on"
-amixer -c APE cset name="CVB-RT DAC1 Playback Volume" "175,175"
+$ amixer -c APE cset name="CVB-RT DAC1 Playback Volume" "175,175"
-amixer -c APE cset name="CVB-RT LOUT MIX DAC L1 Switch" "on"
+$ amixer -c APE cset name="CVB-RT LOUT MIX DAC L1 Switch" "on"
-amixer -c APE cset name="CVB-RT LOUT MIX DAC R1 Switch" "on"
+$ amixer -c APE cset name="CVB-RT LOUT MIX DAC R1 Switch" "on"
-amixer -c APE cset name="CVB-RT OUT Playback Switch" "on,on"
+$ amixer -c APE cset name="CVB-RT OUT Playback Switch" "on,on"
-amixer -c APE cset name="CVB-RT OUT Playback Volume" "31"
+$ amixer -c APE cset name="CVB-RT OUT Playback Volume" "31"
 </pre>

@@ Line 144: / Line 144: @@
 Mic-In
 <pre>
-$ arecord -D hw:APE,0 output.wav
+$ arecord -D hw:APE,0 -r 44100 -c 2 -f S16_LE output.wav
 </pre>

@@ Line 110: / Line 110: @@
 ==== '''Audio''' ====
-Codec Mixer Controls
+Line-Out : Codec Mixer Controls
 <pre>
 amixer -c APE cset name="I2S1 Mux" 0
@@ Line 128: / Line 128: @@
 <pre>
 $ aplay -D hw:APE,0 <in_wav>
 </pre>

@@ Line 110: / Line 110: @@
 ==== '''Audio''' ====
 Line-Out
 <pre>
-$ aplay -D hw:1,0 &lt;WAV file&gt;
+$ aplay -D hw:APE,0 <in_wav>
 </pre>
 ==== '''TPM''' ====

@@ Line 13: / Line 13: @@
 == Flash Mac Address ==
-First, you need to add a patch to the device tree{ Commit da11ea0d: [LAN] Enable Ethernet Controller I225-LM/I225-V support }
+First need to add a patch to the device tree{ Commit da11ea0d: [LAN] Enable Ethernet Controller I225-LM/I225-V support }
 === Download I226 tool to Device ===

@@ Line 24: / Line 24: @@
 === Flash ===
-<span style="color:#FF0000;">'''The MAC address can only be burned in once'''</span>
+Attention : <span data-darkreader-inline-color="" style="color: rgb(205, 0, 0); --darkreader-inline-color: #ff3d3d;">The MAC address can only be burned in once</span>
 Please make sure mac address and set in : -mac=<XXXXXXXXXXXX>

@@ Line 232: / Line 232: @@
 ===== '''APPROPHO Camera''' =====
 HW setting : Camera link to GMSL port
 <br/>
@@ Line 238: / Line 240: @@
 Please install camera driver first
 <br/>
-Attention : can only be executed once command to setup camera
+Attention : <span data-darkreader-inline-color="" style="color: rgb(205, 0, 0); --darkreader-inline-color: #ff3d3d;">can only be executed once command to setup camera </span>
 <br/>
 Then system will reboot

@@ Line 236: / Line 236: @@
 [[File:Appro-gmsl.jpg|600px|border]]
 <br/>
+Please install camera driver first
-Please install camera tool first
+<br/>
 <br/>
 <pre>
-$ sudo apt-get install nvidia-l4t-gstreamer
+$ cd /usr/local/bin/approcam
 </pre>
-Check Video channel "video0"
+Check Video channel "video0" "video1"
 <pre>
 $ ls /dev/video*
@@ Line 249: / Line 253: @@
 Preview command
 <pre>
-$ gst-launch-1.0 nvv4l2camerasrc device=/dev/video0 do-timestamp=true ! 'video/x-raw(memory:NVMM), width=(int)1920, height=(int)1080, format=(string)UYVY' ! queue ! nvvidconv ! xvimagesink sync=false
+$ cd /home/ubuntu
 </pre>
 == Reference ==
 [[DS-015|DS-015]]