Winston: Created page with "=Functional Test for ARK-2151S Form.xlsx= =Test Item= 0. Wind River Image Ver #uname -a 1. Intel(R) Core(TM) i5-4300U CPU @ 1.90GHz (..."

2016-02-17T09:15:56Z

Created page with "=Functional Test for ARK-2151S Form.xlsx= =Test Item= 0. Wind River Image Ver #uname -a 1. Intel(R) Core(TM) i5-4300U CPU @ 1.90GHz (..."

New page

=[[Media:ARK-2151S Functional Test.xlsx|Functional Test for ARK-2151S Form.xlsx]]=
=Test Item=
0. Wind River Image Ver
#uname -a
1. Intel(R) Core(TM) i5-4300U CPU @ 1.90GHz ( Check CPU Specification is the same with your testing target )
Check by BIOS
2. BIOS Version ( Fill the BIOS version )
Check by BIOS => L510XF23.BIN
3. Secure Boot
Refer to [[IDP/Secure Boot|Enable IDP Secure Boot]]
4. VGA
Display with VGA Port
5. HDMI
Display with HDMI Port
6. USB2.0 x 2
lsusb -> show 2.0 hub, To insert a USB flash drive => auto mount to /media/sdx
7. USB3.0 x 2
lsusb -> show 3.0 hub, To insert a 3.0 USB => auto mount to /media/sdx
8. Full-size mini PCIe slot (USB x 2 )
Test by Telite HE910 modem module
9. Full-size mini PCIe slot (PCIe)
Test by Intel AC7260 WiFi module
10. Half-size mini PCIe slot (USB & PCIe)
Test by Telite and AC7260
11. 2.5 SATA HDD Bay
Mount a SATA Hard Disk or deploy IDP image to this hard disk
12. LAN 1
DHCP Client mode=> 1. ifconfig -a 2. ping your computer
13. LAN2
DHCP Client mode=> 1. ifconfig -a 2. ping your computer
Note: Add WAN2 by Luci web page
14. PoE x 4
DHCP Server mode,
1.Direct connect to your computer.
2.To confirm DHCP Server can assign IP to your computer.
15. RS-232 x 2
Test by COM Port to USB. Please refer to [[IDP/RS-232|RS-232]]
16. RS-485 x 2
Test by COM1 <-> COM2 loop back. Please refer to [[IDP/ARK-2151S/RS-485|RS-485]]
17. 8-bit GPIO
modprob i2c-dev
#ls /dev/i2c-*
#/dev/i2c-0 /dev/i2c-1 ~ /dev/i2c-7
DI: i2cget -y 7 0X27 0X00
DO: i2cset -y 7 0x27 0x02 0x00
Note: Doesn't show the "i2c-7" device => System doesn't add "acpi_enforce_resources=lax" in boot option.
Please refer to [[IDP+ARK-2151S]]
18.Audio ALC-888S, High Definition Audio, Line-In/Out
Input:
#arecord -D plughw:1,0 test.wav -v
Output:
#aplay -D plughw:1,0 test.wav -v

Note: Require a microphone and headset/speaker for testing

IDP/ARK-2151S Functional Test - Revision history

Winston: Created page with "=Functional Test for ARK-2151S Form.xlsx= =Test Item= 0. Wind River Image Ver #uname -a 1. Intel(R) Core(TM) i5-4300U CPU @ 1.90GHz (..."