Internal Used/Enable Falcon Mode - Revision history

Charles.huang: Reverted edits by Charles.huang (talk) to last revision by Tim.liang

2022-05-19T07:02:44Z

Reverted edits by Charles.huang (talk) to last revision by Tim.liang

Charles.huang at 07:02, 19 May 2022

2022-05-19T07:02:13Z

Charles.huang at 02:16, 19 May 2022

2022-05-19T02:16:30Z

Charles.huang at 02:15, 19 May 2022

2022-05-19T02:15:56Z

Charles.huang at 02:15, 19 May 2022

2022-05-19T02:15:25Z

Charles.huang at 02:14, 19 May 2022

2022-05-19T02:14:16Z

Tim.liang at 13:22, 26 February 2018

2018-02-26T13:22:16Z

Tim.liang: Created page with "*We need to replace SPL and u-boot git clone [https://github.com/ADVANTECH-Corp/uboot-imx6.git https://github.com/ADVANTECH-Corp/uboot-imx6.git] cd uboot-imx6 git checkout..."

2018-02-26T13:09:33Z

Created page with "*We need to replace SPL and u-boot git clone [https://github.com/ADVANTECH-Corp/uboot-imx6.git https://github.com/ADVANTECH-Corp/uboot-imx6.git] cd uboot-imx6 git checkout..."

New page

*We need to replace SPL and u-boot

git clone [https://github.com/ADVANTECH-Corp/uboot-imx6.git https://github.com/ADVANTECH-Corp/uboot-imx6.git]
cd uboot-imx6
git checkout QuickBoot

PS: Because we take fsl-image-qt5-imx6qrsb4411a1-20171121191640.rootfs.sdcard(2.92GB) as an example, so we need to modify u-boot to store kernel image and args .

./include/configs/mx6advantech_common.h

-#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x400000 /* 2G */
+#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x5D7FFF /* 2.9G */
#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (CONFIG_CMD_SPL_WRITE_SIZE / 512)
#if 0
#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x1000 /* 2MB */
#endif
-#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x400800 /* 2G+1M */
+#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x5D87FF /* 2.9G+1M */

*Then compile u-boot and SPL and replace both of them.
*Use uImage intead of zImage, we need to re-compile kernel

make uImage LOADADDR=0x10008000 -j4

*Boot device to u-boot command line, and perform command as below:

setenv image uImage
fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}
fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}
setenv bootargs console=${console},${baudrate} ${smp} root=${mmcroot} ${bootargs}
mmc write ${loadaddr} 0x5D87FF 0x4000
spl export fdt ${loadaddr} - ${fdt_addr}
mmc write 18000000 0x5D7FFF 0x800
setenv boot_os 1 && saveenv && reset

*Then we can skip u-boot to load kernel and args on mmc.

*If we want to back to u-boot command line, we need to erase spi

flash_erase /dev/mtd0 0xC0000 16

← Older revision		Revision as of 07:02, 19 May 2022
Line 1:		Line 1:

−	{{DISPLAYTITLE: ~~Falcon Mode~~}}	+	{{DISPLAYTITLE:<span style="position: absolute; clip: rect(1px 1px 1px 1px); clip: rect(1px, 1px, 1px, 1px);">{{FULLPAGENAME}}</span>}}

	*We need to replace SPL and u-boot		*We need to replace SPL and u-boot

← Older revision		Revision as of 02:16, 19 May 2022
Line 1:		Line 1:

−	{{DISPLAYTITLE: }}	+	{{DISPLAYTITLE: Falcon Mode}}

	*We need to replace SPL and u-boot		*We need to replace SPL and u-boot

← Older revision		Revision as of 02:15, 19 May 2022
Line 1:		Line 1:

−	{{DISPLAYTITLE:}}	+	{{DISPLAYTITLE: }}

	*We need to replace SPL and u-boot		*We need to replace SPL and u-boot

← Older revision		Revision as of 02:15, 19 May 2022
Line 1:		Line 1:
−	~~{{DISPLAYTITLE:Falcon Mode}}~~

−	*We need to replace SPL and u-boot	+	{{DISPLAYTITLE:}}
		+
		+	*We need to replace SPL and u-boot

	git clone [https://github.com/ADVANTECH-Corp/uboot-imx6.git https://github.com/ADVANTECH-Corp/uboot-imx6.git]		git clone [https://github.com/ADVANTECH-Corp/uboot-imx6.git https://github.com/ADVANTECH-Corp/uboot-imx6.git]

@@ Line 1: / Line 1: @@
 *We need to replace SPL and u-boot
   git clone [https://github.com/ADVANTECH-Corp/uboot-imx6.git https://github.com/ADVANTECH-Corp/uboot-imx6.git]
@@ Line 21: / Line 18: @@
   +#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR        0x5D87FF  /* 2.9G+1M */
 *Then compile u-boot and SPL and replace both of them.
-*Use uImage intead of zImage, we need to re-compile kernel
+*Then compile u-boot and SPL and replace both of them.
   make uImage LOADADDR=0x10008000 -j4
 *If we never setup falcon mode
 **Boot device to u-boot command line, and perform command as below:
   setenv image uImage
@@ Line 40: / Line 37: @@
   setenv boot_os 1 && saveenv && reset
 *If our image is already set, we only perform command as below:
   setenv boot_os 1 && saveenv && reset
 *Then we can skip u-boot to load kernel and args on mmc.
 *If we want to back to u-boot command line, we need to erase spi
    flash_erase /dev/mtd0 0xC0000 16