IoTGateway/BSP/Android/ABV2 User Guide iMX6 - Revision history

Winston.huang: Winston.huang moved page ABV2 User Guide iMX6 to IoTGateway/BSP/Android/ABV2 User Guide iMX6 without leaving a redirect: appropriate directory hierarchy

2016-09-29T03:04:14Z

Winston.huang moved page ABV2 User Guide iMX6 to IoTGateway/BSP/Android/ABV2 User Guide iMX6 without leaving a redirect: appropriate directory hierarchy

Winston.huang: /* Software Functionality */

2016-08-05T02:31:00Z

‎Software Functionality

Winston.huang: /* Software Functionality */

2016-08-05T02:28:45Z

‎Software Functionality

Winston.huang: /* To update system */

2016-08-05T02:24:17Z

‎To update system

Winston.huang: /* Ethernet */

2016-08-05T02:22:17Z

‎Ethernet

Winston.huang: /* Console Test */

2016-08-05T02:20:08Z

‎Console Test

Winston.huang: /* Serial Port Setup */

2016-08-05T02:19:54Z

‎Serial Port Setup

Winston.huang: /* Wi-Fi */

2016-08-05T02:19:31Z

‎Wi-Fi

Winston.huang: /* Send01010101 Test */

2016-08-05T02:16:04Z

‎Send01010101 Test

Winston.huang: /* Loopback Test */

2016-08-05T02:15:05Z

‎Loopback Test

@@ Line 152: / Line 152: @@
 :Remove SD card, then target board can boot up from onboard eMMC.
-=<span style="color:#0070c0;">Software Functionality</span>=
+=Software Functionality=
 ==<span style="color:#0070c0;">Serial Port Test</span>==
 ===<span style="color:#0070c0;">Serial Port Setup</span>===
@@ Line 185: / Line 185: @@
 #:[[File:imx6ABV1_send01010101.png]]
-==<span style="color:#0070c0;">Display Output Option==
+==<span style="color:#0070c0;">Display Output Option</span>==
-===Single HDMI Display</span>===
+===<span style="color:#0070c0;">Single HDMI Display</span>===
 :Perform the following command in u-boot:
 ::<code>> setenv bootargs 'console=ttymxc0,115200 androidboot.console=ttymxc0 vmalloc=400M init=/init video=mxcfb0:dev=hdmi,1920x1080M@60,bpp=32 video=mxcfb1:off video=mxcfb2:off video=mxcfb3:off fbmem=28M androidboot.hardware=freescale'</code>

@@ Line 152: / Line 152: @@
 :Remove SD card, then target board can boot up from onboard eMMC.
-=Software Functionality=
+=<span style="color:#0070c0;">Software Functionality</span>=
-==Serial Port Test==
+==<span style="color:#0070c0;">Serial Port Test</span>==
-===Serial Port Setup===
+===<span style="color:#0070c0;">Serial Port Setup</span>===
 #Click "Serial Port"
 #:[[File:imx6ABV1_APP_serialport.png|800px]]
@@ Line 164: / Line 164: @@
 #:[[File:imx6ABV1_serialport_setup_device_2.png]]
-===Console Test===
+===<span style="color:#0070c0;">Console Test</span>===
 #Open one serial console.
 #Click "Console"
@@ Line 173: / Line 173: @@
 #:[[File:imx6ABV1_console_message_from.png]]
-===Loopback Test===
+===<span style="color:#0070c0;">Loopback Test</span>===
 #Plug loopback device into COM2
 #Click "Loopback"
@@ Line 179: / Line 179: @@
 #:[[File:imx6ABV1_loopback.png|800px]]
-===Send01010101 Test===
+===<span style="color:#0070c0;">Send01010101 Test</span>===
 #Open one serial console.
 #Click Send01010101 .
@@ Line 185: / Line 185: @@
 #:[[File:imx6ABV1_send01010101.png]]
-==Display Output Option==
+==<span style="color:#0070c0;">Display Output Option==
-===Single HDMI Display===
+===Single HDMI Display</span>===
 :Perform the following command in u-boot:
 ::<code>> setenv bootargs 'console=ttymxc0,115200 androidboot.console=ttymxc0 vmalloc=400M init=/init video=mxcfb0:dev=hdmi,1920x1080M@60,bpp=32 video=mxcfb1:off video=mxcfb2:off video=mxcfb3:off fbmem=28M androidboot.hardware=freescale'</code>
@@ Line 193: / Line 193: @@
 ::<code>> reset </code>
-===Single VGA Display===
+===<span style="color:#0070c0;">Single VGA Display</span>===
 :Perform the following command in u-boot:
 ::<code>> setenv bootargs 'console=ttymxc0,115200 androidboot.console=ttymxc0 vmalloc=400M init=/init video=mxcfb0:dev=lcd,1920x1080M@60,bpp=32 video=mxcfb1:off video=mxcfb2:off video=mxcfb3:off fbmem=28M androidboot.hardware=freescale'</code>
@@ Line 199: / Line 199: @@
 ::<code>> reset </code>
-===Single LVDS Display===
+===<span style="color:#0070c0;">Single LVDS Display</span>===
 :Perform the following command in u-boot:
 ::<code>> setenv bootargs 'console=ttymxc0,115200 androidboot.console=ttymxc0 vmalloc=400M init=/init video=mxcfb0:dev=ldb,1024x768M@60,bpp=24 video=mxcfb1:off video=mxcfb2:off video=mxcfb3:off fbmem=28M androidboot.hardware=freescale'</code>
@@ Line 205: / Line 205: @@
 ::<code>> reset </code>
-===Dual Display===
+===<span style="color:#0070c0;">Dual Display</span>===
 :For example of HDMI & VGA, Perform the following command in u-boot:
 ::<code>> setenv bootargs 'console=ttymxc0,115200 androidboot.console=ttymxc0 vmalloc=400M init=/init video=mxcfb0:dev=hdmi,1920x1080M@60,bpp=32 video=mxcfb1:dev=lcd,1920x1080M@60,bpp=32 video=mxcfb2:off video=mxcfb3:off fbmem=28M,28M androidboot.hardware=freescale'</code>
@@ Line 211: / Line 211: @@
 ::<code>> reset </code>
-==Network Setup==
+==<span style="color:#0070c0;">Network Setup==
-===Wi-Fi===
+===<span style="color:#0070c0;">Wi-Fi</span>===
 #Click "Settings"
 #:[[File:imx6ABV1_APP_settings.png|800px]]
@@ Line 228: / Line 228: @@
 #:[[File:imx6ABV1_settings_wifi_connected.png|800px]]
-===Ethernet===
+===<span style="color:#0070c0;">Ethernet</span>===
 #Click "Settings" / "Ethernet configuration" , then Turn on Ethernet
 #:[[File:imx6ABV1_settings_ethernet_config.png|800px]]
@@ Line 236: / Line 236: @@
 #:[[File:imx6ABV1_settings_ethernet_config_dhcp.png||400px]][[File:imx6ABV1_settings_ethernet_config_static.png|400px]]
-==To update system==
+==<span style="color:#0070c0;">To update system==
 #Refer to 1.4.6 to build OTA package.
 #Plug SD card that contains OTA package(update.zip) into SD slot.

@@ Line 237: / Line 237: @@
 ==To update system==
-:Refer to 1.4.6 to build OTA package.
+#Refer to 1.4.6 to build OTA package.
-:Plug SD card that contains OTA package(update.zip) into SD slot.
+#Plug SD card that contains OTA package(update.zip) into SD slot.
-:Click "Settings" / "About tablet" / "Addition system updates" :
+#Click "Settings" / "About tablet" / "Addition system updates" :
-:Wait for one moment, system will reboot for updating
+#:[[File:imx6ABV1_settings_addition_system_updates.png|800px]]
-:It will take some time to update.
+#Wait for one moment, system will reboot for updating
 =System Recovery=
 Please refer to [[#To_create_a_bootable_SD_card|1.5.1]] & [[#To_transfer_whole_system_to_onboard_eMMC|1.5.2]] to create a bootable SD card and transfer whole system to on-board eMMC.

@@ Line 229: / Line 229: @@
 ===Ethernet===
-:Click "Settings" / "Ethernet configuration" , then Turn on Ethernet
+#Click "Settings" / "Ethernet configuration" , then Turn on Ethernet
-:Click "Ethernet configuration"
+#:[[File:imx6ABV1_settings_ethernet_config.png|800px]]
-:Choose Connection Type (DHCP or Static IP)
+#Click "Ethernet configuration"
 ==To update system==

@@ Line 167: / Line 167: @@
 #Open one serial console.
 #Click "Console"
-#:[[File:imx6ABV1_console.png|700px]]
+#:[[File:imx6ABV1_console.png|800px]]
 #:Typing some characters (e.g. "This is a test. 123456789ABCDEF") then pressing Enter in serial console, the identical message will shows up in reception block as below:
 #:[[File:imx6ABV1_console_serialport.png]]

← Older revision	Revision as of 03:04, 29 September 2016
(No difference)

@@ Line 156: / Line 156: @@
 ===Serial Port Setup===
 #Click "Serial Port"
-#:[[File:imx6ABV1_APP_serialport.png|700px]]
+#:[[File:imx6ABV1_APP_serialport.png|800px]]
 #Click "Setup"
-#:[[File:imx6ABV1_serialport_setup.png|700px]]
+#:[[File:imx6ABV1_serialport_setup.png|800px]]
 #Click "Device" , and choose the used device(e.g. ttymxc1)
 #:[[File:imx6ABV1_serialport_setup_device_1.png]]

@@ Line 213: / Line 213: @@
 ==Network Setup==
 ===Wi-Fi===
-:Click "Settings"
+#Click "Settings"
-:Turn Wi-Fi on
+#:[[File:imx6ABV1_APP_settings.png|800px]]
-:Choose ESSID (e.g. ESSD Testing )
+#Turn Wi-Fi on
-:Input correct password
+#:[[File:imx6ABV1_settings_wifi_on.png|800px]]
-:Wi-Fi Authenticating/Connecting/Obtaining IP address
+#Choose ESSID (e.g. ESSD Testing )
-:Wi-Fi connected
+#:[[File:imx6ABV1_settings_wifi_choose_ESSID.png|800px]]
 ===Ethernet===

@@ Line 180: / Line 180: @@
 ===Send01010101 Test===
-:Open one serial console.
+#Open one serial console.
-:Click Send01010101 .
+#Click Send01010101 .
-::The character "U" (b'01010101) will show up continuously as below:
+#:The character "U" (b'01010101) will show up continuously as below:
 ==Display Output Option==