IoTGateway/BSP/Linux/AM335x/AM335x LBV6 User Guide - Revision history

Phill.liu: Modify the correct config command for kernel

2017-08-14T03:10:17Z

Modify the correct config command for kernel

Evelyn.tang at 02:18, 17 May 2017

2017-05-17T02:18:39Z

Chang.qing at 08:36, 8 February 2017

2017-02-08T08:36:33Z

Chang.qing at 06:32, 8 February 2017

2017-02-08T06:32:33Z

Show changes

Chang.qing at 08:44, 7 February 2017

2017-02-07T08:44:51Z

Chang.qing at 08:39, 7 February 2017

2017-02-07T08:39:47Z

Zhengguang.yang at 02:58, 30 September 2016

2016-09-30T02:58:20Z

Zhengguang.yang at 02:51, 30 September 2016

2016-09-30T02:51:42Z

Zhengguang.yang at 02:50, 30 September 2016

2016-09-30T02:50:29Z

Zhengguang.yang at 02:44, 30 September 2016

2016-09-30T02:44:00Z

@@ Line 146: / Line 146: @@
 *#cd $(BSP)/scripts/
 *#source setenv.sh (To configure the developing environment automatically)
-*#./cfg_kernel.sh am335x_rsb4220_defconfig (To set the uImage configuration automatically)
+*#./cfg_kernel.sh tisdk_am335x-rsb4220_defconfig (To set the uImage configuration automatically)
 *#./mk_kernel.sh (Start to build the uImage)

@@ Line 134: / Line 134: @@
 *$sudo su (Change to “root” authority)
 *Input user password.
-*# cd $(BSP)/scripts/
+*#cd $(BSP)/scripts/
-*# source setenv.sh (To configure the developing environment automatically)
+*#source setenv.sh (To configure the developing environment automatically)
-*#./cfg_uboot.sh am335x_rsb4220 (To set the u-boot configuration automatically)
+*#./cfg_uboot.sh am335x_rsb4220_defconfig (To set the u-boot configuration automatically)
 *#./mk_uboot.sh (Start to build the u-boot)

@@ Line 175: / Line 175: @@
 ! Node Name
 |-
-| SD caed
+| SD card<br/>
 | /dev/mmcblk0
 |-

← Older revision		Revision as of 08:44, 7 February 2017
Line 224:		Line 224:
	== <span style="color:#0070c0">HW module Configuration & driver</span> ==		== <span style="color:#0070c0">HW module Configuration & driver</span> ==

		+	*[[IoTGateway/BSP/Linux/AM335x/Add_a_Driver_to_Kernel_by_menuconfig\|Add a Driver to Kernel by menuconfig]]
	*[[IoTGateway/BSP/Linux/AM335x/Hardware_module\|Hardware module]]		*[[IoTGateway/BSP/Linux/AM335x/Hardware_module\|Hardware module]]

@@ Line 222: / Line 222: @@
 =Developement Guide=
-==<span style="color:#0070c0;"> HW module Configuration & driver </span>==
+== <span style="color:#0070c0">HW module Configuration & driver</span> ==
-* [[IoTGateway/BSP/Linux/AM335x/Add_a_Driver_to_Kernel_by_menuconfig| Add a Driver to Kernel by menuconfig]]
-* [[IoTGateway/BSP/Linux/AM335x/Hardware_module| Hardware module]]
+*[[IoTGateway/BSP/Linux/AM335x/Hardware_module|Hardware module]]
 == <span style="color:#0070c0;"> C/C++ & Qt Application Development </span>==

@@ Line 176: / Line 176: @@
 '''1. Create system from Pre-built System Image'''<br/>You are able to find the pre-built image from Advantech website. Please follow below steps to create a SD card for boot up. we still use the RSB-4220 as demo:
-*Copy “4420LIVxxxx_yyyy-mm-dd.tar.gz” package to your /root/.
+*   Copy “4420LIVxxxx_yyyy-mm-dd.tar.gz” package to your /root/.
-*Open "Terminal" on Ubuntu host PC.
+*   Open "Terminal" on Ubuntu host PC.
-*$sudo su (Change to “root” authority)
+*   $sudo su (Change to “root” authority)
-*Input your password.
+*   Input your password.
-*# cd /root/
+*   #cd /root/
-*# tar xzvf 4220LIVxxxx_yyyy-mm-dd.tar.gz (Unzip files)
+*   #tar xzvf 4220LIVxxxx_yyyy-mm-dd.tar.gz (Unzip files)
-*Insert one SD card to your developing computer
+*   Insert one SD card to your developing computer
-*Check the SD card location, like /dev/sdb
+*   Check the SD card location, like /dev/sdb
-*#cd ./4220LIVxxxx_yyyy-mm-dd/scripts
+*   #cd ./4220LIVxxxx_yyyy-mm-dd/scripts
-*#./mksd-linux.sh /dev/sdb
+*  #./mksd-linux.sh /dev/sdb
-*Type “y” (Start to copy files, wait until it shows [Done] )
+*  Type “y” (Start to copy files, wait until it shows [Done] )
 Then insert the Linux system SD card to target board (like RSB-4220), it will boot up with Linux environment.
@@ Line 192: / Line 192: @@
 '''2.Create system from Source Code Package'''<br/>When you receive the advantech Linux source code package, you can refer following steps to create a Linux system SD card for booting up from it.we still use the RSB-4220 as demo:
-*Open "Terminal" on Ubuntu host PC.
+*  Open "Terminal" on Ubuntu host PC.
-*$sudo su (Change to “root” authority)
+*  $sudo su (Change to “root” authority)
-*Input your password.
+*  Input your password.
-*Insert one SD card to your developing computer
+*  Insert one SD card to your developing computer
-*Check the SD card location, like: /dev/sdb
+*  Check the SD card location, like: /dev/sdb
-*Ensure that you have built the uboot and kernel
+*  Ensure that you have built the uboot and kernel
-*#cd $(BSP)/scripts
+*  #cd $(BSP)/scripts
-*#./mksd-linux.sh /dev/sdb
+*  #./mksd-linux.sh /dev/sdb
-*Type “y” (Start to copy files, wait until it shows [Done] )
+*  Type “y” (Start to copy files, wait until it shows [Done] )
 Then insert the Linux system SD card to target board's (such as RSB-4220) SD card slot, it will boot up with Linux environment.

@@ Line 46: / Line 46: @@
 When you obtain the advantech Linux source code package, please refer to following instructions to install it to you host PC.
-*Copy "AM335X_LBBxxxx_yyyy-mm-dd.bin" package to /root/.
+* Copy "AM335X_LBBxxxx_yyyy-mm-dd.bin" package to /root/.
-*Start your "Terminal" on Ubuntu host PC.
+* Start your "Terminal" on Ubuntu host PC.
-*$sudo su (Change to “root” authority)
+* $sudo su (Change to “root” authority)
-*Input user password
+* Input user password
-*#cd /root/
+* #cd /root/
-*#chmod 777 AM335X_LBBxxxx_yyyy-mm-dd.bin
+* #chmod 777 AM335X_LBBxxxx_yyyy-mm-dd.bin
-*#./AM335X_LBBxxxx_yyyy-mm-dd.bin
+* #./AM335X_LBBxxxx_yyyy-mm-dd.bin
-*Input “yes”
+* Input “yes”
-*Then you can see folder "AM335X_LBBxxxx_yyyy-mm-dd" on /root/.
+* Then you can see folder "AM335X_LBBxxxx_yyyy-mm-dd" on /root/.
 AM335x board source code package (BSP) contains cross compiler, Linux source code, Uboot source code, root file system and some scripts used in development. Some of above components are developed by Advantech and the others are developed by open source community. AM335x source code package is composed of six main folders: “cross_compiler”, “document”，“image”, “package”, “scripts”, and “source”.<br/><font color="#FF0000">Note! AM335x source code package (BSP) is Advantech’s Intellectual Property. If you need to access this package, please contact your Advantech support window.</font><br/>[[File:Bsp.png|RTENOTITLE]]<br/>The description of AM335x BSP package contents:
@@ Line 110: / Line 110: @@
 |}
-'''3. source '''
+'''3. source '''<br/>This folder contains sub-directories "linux-3.2.0-psp04.06.00.11" and "u-boot-2013.01.01-psp06.00.00.00" and demo. They are the source codes of the Linux kernel, U-boot and demo.
 == <span style="color:#0070c0">BSP Building Guide</span> ==

@@ Line 8: / Line 8: @@
 After installed this OS, you must install some essential libraries or tools on your host PC for building these source code. We will describe how to install them as follow:
-*  ''' build-essential'''
+*'''build-essential'''
 If you have a new Ubuntu system where you have not installed anything for building. The build-essential library is necessary. The command as follow:
@@ Line 14: / Line 14: @@
 </pre>
-*  ''' 32-bit compatibility libraries'''
+*'''32-bit compatibility libraries'''
 As we known, the host PC is 64-bit Ubuntu, but some tools are a 32-bit tool. To make them work, you must install this 32-bit compatibility libraries. The command is follow on 64 bit Ubuntu14.04:
@@ Line 30: / Line 30: @@
 </pre>
-*  ''' Some essential tools for BSP building'''
+*'''Some essential tools for BSP building'''
 After step1 and step2, you can build some application based linux. But if you want to build BSP source code, you need to install these following tools on ubuntu14.04.
@@ Line 36: / Line 36: @@
 </pre>
-And On ubuntu14.04, you can type following command to install these software:
+And On ubuntu12.04, you can type following command to install these software:
 <pre> # sudo apt-get update libncurses5-dev autoconf automake dos2unix uboot-mkimage
 </pre>
-Because starting with Ubuntu 14.04 the package name for uboot-mkimage has changed to u-boot-tools.<br/>'''After these steps, you can buid what you want, best wishes! '''<br/>
+Because starting with Ubuntu 14.04 the package name for uboot-mkimage has changed to u-boot-tools.<br/>'''After these steps, you can buid what you want, best wishes!'''
 == <span style="color:#0070c0">Install Advantech SDK</span> ==

@@ Line 153: / Line 153: @@
 === Debug Message ===
-All advantech risc products can connect to a host PC (Linux or Windows) by using console cable and debug port adapter. In order to communicate with host PC, serial communication program such as HyperTerminal, Tera Term or PuTTY is must required. Suggest use PuTTY in Ubuntu 14.04. Below is the detail instruction of how to setup PuTTY on ubuntu 14.04 hosts:<br>
-Install putty on ubuntu 14.04 <br>
+All advantech risc products can connect to a host PC (Linux or Windows) by using console cable and debug port adapter. In order to communicate with host PC, serial communication program such as HyperTerminal, Tera Term or PuTTY is must required. Suggest use PuTTY on your host PC. Below is the detail instruction of how to setup PuTTY on ubuntu 14.04 hosts:<br/>Install putty as below <br/>[[File:Putty1.png|RTENOTITLE]]<br/>
-[[Image: putty1.png]]<br>
+* Connect target board to your ubuntu PC by using console cable.<br/>
-) Connect target board to your ubuntu PC by using console cable <br>
+* Open putty on your ubuntu PC.<br/>
-) Open putty on your ubuntu PC <br>
+* power up the target board.<br/>
-) power up the target board <br>
+* Setting putty as follows.<br/>
-) Setting putty as follows <br>
+[[File:Putty5.png|RTENOTITLE]]<br/>Select correct serial line， then click open. Then you will see the console information： [[File:Putty7.png|RTENOTITLE]]<br/>Type root to login in system.
 === Storage Information (eMMC/SD card)  ===