MCU/WISE-1570-FirmwareUpdate-For-BC95 - Revision history

Will.chen at 08:22, 7 September 2017

2017-09-07T08:22:08Z

Will.chen at 08:20, 7 September 2017

2017-09-07T08:20:23Z

Will.chen at 07:27, 7 September 2017

2017-09-07T07:27:54Z

Will.chen at 06:56, 7 September 2017

2017-09-07T06:56:39Z

Will.chen at 06:31, 7 September 2017

2017-09-07T06:31:15Z

Will.chen at 06:30, 7 September 2017

2017-09-07T06:30:24Z

Will.chen at 06:27, 7 September 2017

2017-09-07T06:27:23Z

Will.chen at 05:44, 7 September 2017

2017-09-07T05:44:15Z

Will.chen at 05:42, 7 September 2017

2017-09-07T05:42:06Z

Will.chen at 05:39, 7 September 2017

2017-09-07T05:39:13Z

@@ Line 21: / Line 21: @@
 [[File:Wise1570 nbiot firmware update 04.png|center|300px|Wise1570_nbiot_firmware_update_04.png]]
-Set the com port and path for Code Loader installation.<br/>“COMPORT”&nbsp;: the number of com port deteced from PC.<br/>“CODELOADER”&nbsp;: the path where the Code Loader is installed.<br/><br/>[[File:Wise1570 nbiot firmware update 05.png|center|600px|Wise1570_nbiot_firmware_update_05.png]]
+Set the COM port and path for Code Loader installation.<br/>“COMPORT”&nbsp;: the number of com port deteced from PC.<br/>“CODELOADER”&nbsp;: the path where the Code Loader is installed.<br/><br/>[[File:Wise1570 nbiot firmware update 05.png|center|600px|Wise1570_nbiot_firmware_update_05.png]]
@@ Line 63: / Line 63: @@
-Set the com port, bnad and path for Code Loader installation.<br/>“COMPORT”&nbsp;: the number of com port deteced from PC.<br/>“BAND”: 800 (for Band 20), 850 (for Band 5) or 900 (for Band 8),<br/>“CODELOADER”&nbsp;: the path where the Code Loader is installed.
+Set the COM&nbsp;port, bnad and path for Code Loader installation.<br/>“COMPORT”&nbsp;: the number of com port deteced from PC.<br/>“BAND”: 800 (for Band 20), 850 (for Band 5) or 900 (for Band 8),<br/>“CODELOADER”&nbsp;: the path where the Code Loader is installed.
 [[File:Wise1570 nbiot firmware update 08.png|center|600px|Wise1570_nbiot_firmware_update_08.png]]

@@ Line 1: / Line 1: @@
 = Please follow steps to firmware update =
-'''Step01:''' Prepare boards include WISE-1570 and WISE-ED22, <br/>'''①&nbsp;'''Connect WISE-1570 to WISE-ED22 by FPC 10 pin cable.<br/>'''② C'''onnect&nbsp;WISE-ED22 to PC by micro-USB cable.<br/>'''③ '''If you want to get pin-definition detailed for H/W rework as below, please get in touch with the contact person from ADVANTECH.
+'''Step01:''' Prepare boards include WISE-1570 and WISE-ED22,<br/>'''①&nbsp;'''Connect WISE-1570 to WISE-ED22 by FPC 10 pin cable.<br/>'''② '''Connect&nbsp;WISE-ED22 to PC by micro-USB cable.<br/>'''③ '''If you want to get pin-definition detailed for H/W rework as below, please get in touch with the contact person from ADVANTECH.
 [[File:Wise1570 nbiot firmware update 01.png|center|500px|Wise1570_nbiot_firmware_update_01.png]]<br/>[[File:Wise1570 nbiot firmware update 02.png|center|500px|Wise1570_nbiot_firmware_update_02.png]]

@@ Line 1: / Line 1: @@
 = Please follow steps to firmware update =
-'''Step01:''' Prepare boards include WISE-1570, WISE-ED22 and micro-USB cable.<br/>Note: If you want to get pin-definition detailed for H/W rework as below, please get in touch with the contact person from ADVANTECH.
+'''Step01:''' Prepare boards include WISE-1570 and WISE-ED22, <br/>'''①&nbsp;'''Connect WISE-1570 to WISE-ED22 by FPC 10 pin cable.<br/>'''② C'''onnect&nbsp;WISE-ED22 to PC by micro-USB cable.<br/>'''③ '''If you want to get pin-definition detailed for H/W rework as below, please get in touch with the contact person from ADVANTECH.
 [[File:Wise1570 nbiot firmware update 01.png|center|500px|Wise1570_nbiot_firmware_update_01.png]]<br/>[[File:Wise1570 nbiot firmware update 02.png|center|500px|Wise1570_nbiot_firmware_update_02.png]]
@@ Line 10: / Line 12: @@
 [[File:Wise1570 nbiot firmware update 03.png|center|300px|Wise1570_nbiot_firmware_update_03.png]]
@@ Line 18: / Line 22: @@
 Set the com port and path for Code Loader installation.<br/>“COMPORT”&nbsp;: the number of com port deteced from PC.<br/>“CODELOADER”&nbsp;: the path where the Code Loader is installed.<br/><br/>[[File:Wise1570 nbiot firmware update 05.png|center|600px|Wise1570_nbiot_firmware_update_05.png]]
@@ Line 44: / Line 50: @@
 [[File:Wise1570 nbiot firmware update 11.png|center|500px|Wise1570_nbiot_firmware_update_11.png]]&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;All procees have been done and "OK" will show up.&nbsp;
@@ Line 58: / Line 66: @@
 [[File:Wise1570 nbiot firmware update 08.png|center|600px|Wise1570_nbiot_firmware_update_08.png]]
@@ Line 83: / Line 93: @@
-[[File:Wise1570 nbiot firmware update 11.png|center|500px|Wise1570_nbiot_firmware_update_11.png]]
+[[File:Wise1570 nbiot firmware update 11.png|center|500px|Wise1570_nbiot_firmware_update_11.png]] &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; All procees have been done and "OK" will show up.&nbsp;

@@ Line 21: / Line 21: @@
-'''Step04:''' Double click "Codeloader-Erase.bat" and press 'SW1" of WISE-ED22 to start erasing&nbsp;flash with BC95.
 [[File:Wise1570 nbiot firmware update 06.png|center|500px|Wise1570_nbiot_firmware_update_06.png]]
 [[File:Wise1570 nbiot firmware update 10.png|center|500px|Wise1570_nbiot_firmware_update_10.png]]
-[[File:Wise1570 nbiot firmware update 11.png|center|500px|Wise1570_nbiot_firmware_update_11.png]]
+&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; Erase&nbsp;flash&nbsp;in progress.
@@ Line 43: / Line 61: @@
-'''Step06:''' Double click "CodeLoadBC95HA.bat" and press 'SW1" of WISE-ED22 to start upgrading&nbsp;firmware with BC95.
+'''Step06:''' Double click "CodeLoadBC95HA.bat" and press button 'SW1" on WISE-ED22 to start upgrading&nbsp;firmware with BC95.
 [[File:Wise1570 nbiot firmware update 09.png|center|500px|Wise1570_nbiot_firmware_update_09.png]]
 [[File:Wise1570 nbiot firmware update 10.png|center|500px|Wise1570_nbiot_firmware_update_10.png]]
 [[File:Wise1570 nbiot firmware update 11.png|center|500px|Wise1570_nbiot_firmware_update_11.png]]
+&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; All procees have been done and "OK" will show up.&nbsp;

@@ Line 1: / Line 1: @@
 = Please follow steps to firmware update =
-'''Step01:''' Prepare boards include WISE-1570, WISE-ED22 and micro-USB cable.<br/>Note: If you want to get pin-definition detailed for rework as below, please get in touch with the contact person from ADVANTECH.
+'''Step01:''' Prepare boards include WISE-1570, WISE-ED22 and micro-USB cable.<br/>Note: If you want to get pin-definition detailed for H/W rework as below, please get in touch with the contact person from ADVANTECH.
 [[File:Wise1570 nbiot firmware update 01.png|center|500px|Wise1570_nbiot_firmware_update_01.png]]<br/>[[File:Wise1570 nbiot firmware update 02.png|center|500px|Wise1570_nbiot_firmware_update_02.png]]

@@ Line 3: / Line 3: @@
 == Running CCS installer ==
-'''Step01:''' Prepare boards.<br/>Note: If you want to get pin-definition detailed, please get in touch with the contact person from ADVANTECH.
+'''Step01:''' Prepare boards include WISE-1570, WISE-ED22 and micro-USB cable.<br/>Note: If you want to get pin-definition detailed for rework as below, please get in touch with the contact person from ADVANTECH.
 [[File:Wise1570 nbiot firmware update 01.png|center|500px|Wise1570_nbiot_firmware_update_01.png]]<br/>[[File:Wise1570 nbiot firmware update 02.png|center|500px|Wise1570_nbiot_firmware_update_02.png]]
-'''Step02:''' Check the number of COM port detected from PC.<br/>Note: If you don't setup WISE-ED22 before, please refer to link for it firstly.
 [[File:Wise1570 nbiot firmware update 03.png|center|300px|Wise1570_nbiot_firmware_update_03.png]]
-'''Step03:''' Find batch file “Codeloader-Erase.bat”, check the number of com port detected from PC in it and run it to erase for BC95.<br/>Note: If you don't have programming tool "Codeloader", please get in touch with the contact person from ADVANTECH.
 [[File:Wise1570 nbiot firmware update 04.png|center|300px|Wise1570_nbiot_firmware_update_04.png]]
-'''Step04:''' Reset.
+'''Step04:''' Double click "Codeloader-Erase.bat" and press 'SW1" of WISE-ED22 to start erasing&nbsp;flash with BC95.
 [[File:Wise1570 nbiot firmware update 06.png|center|500px|Wise1570_nbiot_firmware_update_06.png]]
@@ Line 27: / Line 31: @@
 [[File:Wise1570 nbiot firmware update 11.png|center|500px|Wise1570_nbiot_firmware_update_11.png]]
-'''Step05:''' Find batch file “Codeloader-Erase.bat”, check the number of com port detected from PC in it and run it to erase for BC95.
 [[File:Wise1570 nbiot firmware update 07.png|center|300px|Wise1570_nbiot_firmware_update_07.png]]
 [[File:Wise1570 nbiot firmware update 08.png|center|600px|Wise1570_nbiot_firmware_update_08.png]]
-'''Step06:''' Find batch file “CodeLoaderBC95HA.bat”, modify the number of com port detected from PC in it and run it to program for BC95.
 [[File:Wise1570 nbiot firmware update 09.png|center|500px|Wise1570_nbiot_firmware_update_09.png]]

@@ Line 2: / Line 2: @@
 == Running CCS installer ==
-[[File:Wise1570 nbiot firmware update 01.png|center|500px|Wise1570_nbiot_firmware_update_01.png]] <br>
+'''Step01:''' Prepare boards.<br/>Note: If you want to get pin-definition detailed, please get in touch with the contact person from ADVANTECH.
-'''Step02:''' Check the number of COM port detected from PC. Note: If you don't setup WISE-ED22 before, please refer to link for it firstly.
+[[File:Wise1570 nbiot firmware update 01.png|center|500px|Wise1570_nbiot_firmware_update_01.png]]<br/>[[File:Wise1570 nbiot firmware update 02.png|center|500px|Wise1570_nbiot_firmware_update_02.png]]<br>
-[[File:Wise1570 nbiot firmware update 03.png|center|300px|Wise1570_nbiot_firmware_update_03.png]] <br>
+'''Step02:''' Check the number of COM port detected from PC.<br/>Note: If you don't setup WISE-ED22 before, please refer to link for it firstly.
-'''Step03:''' Find batch file “Codeloader-Erase.bat”, check the number of com port detected from PC in it and run it to erase for BC95.
+[[File:Wise1570 nbiot firmware update 03.png|center|300px|Wise1570_nbiot_firmware_update_03.png]]<br>
-[[File:Wise1570 nbiot firmware update 04.png|center|300px|Wise1570_nbiot_firmware_update_04.png]] <br>
+'''Step03:''' Find batch file “Codeloader-Erase.bat”, check the number of com port detected from PC in it and run it to erase for BC95.<br/>Note: If you don't have programming tool "Codeloader", please get in touch with the contact person from ADVANTECH.
 [[File:Wise1570 nbiot firmware update 05.png|center|600px|Wise1570_nbiot_firmware_update_05.png]] <br>
 '''Step04:''' Reset.
-[[File:Wise1570 nbiot firmware update 06.png|center|500px|Wise1570_nbiot_firmware_update_06.png]] <br>
+[[File:Wise1570 nbiot firmware update 06.png|center|500px|Wise1570_nbiot_firmware_update_06.png]]
-[[File:Wise1570 nbiot firmware update 10.png|center|500px|Wise1570_nbiot_firmware_update_10.png]] <br>
+[[File:Wise1570 nbiot firmware update 10.png|center|500px|Wise1570_nbiot_firmware_update_10.png]]
-[[File:Wise1570 nbiot firmware update 11.png|center|500px|Wise1570_nbiot_firmware_update_11.png]] <br>
+[[File:Wise1570 nbiot firmware update 11.png|center|500px|Wise1570_nbiot_firmware_update_11.png]]<br>
 '''Step05:''' Find batch file “Codeloader-Erase.bat”, check the number of com port detected from PC in it and run it to erase for BC95.
-[[File:Wise1570 nbiot firmware update 07.png|center|300px|Wise1570_nbiot_firmware_update_07.png]] <br>
+[[File:Wise1570 nbiot firmware update 07.png|center|300px|Wise1570_nbiot_firmware_update_07.png]]
-[[File:Wise1570 nbiot firmware update 08.png|center|500px|Wise1570_nbiot_firmware_update_08.png]] <br>
+[[File:Wise1570 nbiot firmware update 08.png|center|500px|Wise1570_nbiot_firmware_update_08.png]]<br>
 '''Step06:''' Find batch file “CodeLoaderBC95HA.bat”, modify the number of com port detected from PC in it and run it to program for BC95.
-[[File:Wise1570 nbiot firmware update 09.png|center|500px|Wise1570_nbiot_firmware_update_09.png]] <br>
+[[File:Wise1570 nbiot firmware update 09.png|center|500px|Wise1570_nbiot_firmware_update_09.png]]
-[[File:Wise1570 nbiot firmware update 10.png|center|500px|Wise1570_nbiot_firmware_update_10.png]] <br>
+[[File:Wise1570 nbiot firmware update 10.png|center|500px|Wise1570_nbiot_firmware_update_10.png]]
-[[File:Wise1570 nbiot firmware update 11.png|center|500px|Wise1570_nbiot_firmware_update_11.png]] <br>
+[[File:Wise1570 nbiot firmware update 11.png|center|500px|Wise1570_nbiot_firmware_update_11.png]]<br>
 {| style="border-spacing:0;width:15.748cm;"

@@ Line 1: / Line 1: @@
-= Introduction = == Running CCS installer ==
+= Introduction =
-Step01: Prepare boards. Note: If you want to get pin-definition detailed, please get in touch with the contact person from ADVANTECH. [[File:Wise1570_nbiot_firmware_update_01.png|center|500px|Wise1570_nbiot_firmware_update_01.png]]
-[[File:Wise1570_nbiot_firmware_update_02.png|center|500px|Wise1570_nbiot_firmware_update_02.png]]
+== Running CCS installer ==
-Step02: Check the number of COM port detected from PC. Note: If you don't setup WISE-ED22 before, please refer to link for it firstly. [[File:Wise1570_nbiot_firmware_update_03.png|center|300px|Wise1570_nbiot_firmware_update_03.png]]
+'''Step01:''' Prepare boards.
-Step03: Find batch file “Codeloader-Erase.bat”, check the number of com port detected from PC in it and run it to erase for BC95. Note: If you don't have programming tool "Codeloader", please get in touch with the contact person from ADVANTECH. [[File:Wise1570_nbiot_firmware_update_04.png|center|300px|Wise1570_nbiot_firmware_update_04.png]]
+Note: If you want to get pin-definition detailed, please get in touch with the contact person from ADVANTECH. <br>
-[[File:Wise1570_nbiot_firmware_update_05.png|center|600px|Wise1570_nbiot_firmware_update_05.png]]
-Step04: Reset. [[File:Wise1570_nbiot_firmware_update_06.png|center|500px|Wise1570_nbiot_firmware_update_06.png]]
+[[File:Wise1570 nbiot firmware update 01.png|center|500px|Wise1570_nbiot_firmware_update_01.png]] <br>
-[[File:Wise1570_nbiot_firmware_update_10.png|center|500px|Wise1570_nbiot_firmware_update_10.png]]
+[[File:Wise1570 nbiot firmware update 02.png|center|500px|Wise1570_nbiot_firmware_update_02.png]] <br>
-[[File:Wise1570_nbiot_firmware_update_11.png|center|500px|Wise1570_nbiot_firmware_update_11.png]]
-Step05: Find batch file “Codeloader-Erase.bat”, check the number of com port detected from PC in it and run it to erase for BC95. [[File:Wise1570_nbiot_firmware_update_07.png|center|300px|Wise1570_nbiot_firmware_update_07.png]]
+'''Step02:''' Check the number of COM port detected from PC. Note: If you don't setup WISE-ED22 before, please refer to link for it firstly.
-[[File:Wise1570_nbiot_firmware_update_08.png|center|500px|Wise1570_nbiot_firmware_update_08.png]]
-Step06: Find batch file “CodeLoaderBC95HA.bat”, modify the number of com port detected from PC in it and run it to program for BC95. [[File:Wise1570_nbiot_firmware_update_09.png|center|500px|Wise1570_nbiot_firmware_update_09.png]]
+[[File:Wise1570 nbiot firmware update 03.png|center|300px|Wise1570_nbiot_firmware_update_03.png]] <br>
-[[File:Wise1570_nbiot_firmware_update_10.png|center|500px|Wise1570_nbiot_firmware_update_10.png]]
-[[File:Wise1570_nbiot_firmware_update_11.png|center|500px|Wise1570_nbiot_firmware_update_11.png]]
+'''Step03:''' Find batch file “Codeloader-Erase.bat”, check the number of com port detected from PC in it and run it to erase for BC95.
-{| style="border-spacing:0;width:15.748cm;" |- | |}
+Note: If you don't have programming tool "Codeloader", please get in touch with the contact person from ADVANTECH.