ROM-5780 user guide Android 7.12 - Revision history

Xingxing.li at 01:10, 13 April 2023

2023-04-13T01:10:01Z

Xingxing.li at 01:00, 13 April 2023

2023-04-13T01:00:21Z

Xingxing.li at 00:56, 13 April 2023

2023-04-13T00:56:39Z

Xingxing.li at 00:54, 13 April 2023

2023-04-13T00:54:52Z

Xingxing.li at 00:48, 13 April 2023

2023-04-13T00:48:16Z

Xingxing.li: Created page with " == '''資源特性(Features)''' == Rockchip RK3399 Arm dual Cortex-A72 and quad Cortex-A53 1.8 GHz Onboard 2GB LPDDR4 memory and 16GB eMMC *Support HDMI2.0 4K 60fps, 1x..."

2023-04-13T00:43:04Z

Created page with " == '''資源特性(Features)''' == *Rockchip RK3399 Arm dual Cortex-A72 and quad Cortex-A53 1.8 GHz *Onboard 2GB LPDDR4 memory and 16GB eMMC *Support HDMI2.0 4K 60fps, 1x..."

New page

== '''資源特性(Features)''' ==

*Rockchip RK3399 Arm dual Cortex-A72 and quad Cortex-A53 1.8 GHz
*Onboard 2GB LPDDR4 memory and 16GB eMMC
*Support HDMI2.0 4K 60fps, 1x DP, 1x eDP, 1 x LVDS
*Support 4K H.264/H.265 Video decoder
*2 x USB3.0, 3 x USB2.0,1 x USB2,0 OTG, 3 x UART, 12 x GPIO
*1 x PCIe2.0, 1 x SATA, 1 x 4-lane MIPI CSI, Gigabit LAN
*Support Debian Linux and Android

== '''簡介（Introduction）''' ==

Advantech ROM-5780 SMARC 2.1 Computer-on-Module is powered by Rockchip RK3399 SOC which includes dual-core Arm Cortex-A72 and quad-core Arm Cortex-A53 processors and Arm Mali-T860MP4 3D graphics engine. It provides rich display interface: HDMI 4K@60Hz, eDP and LVDS to meet different requirement. It also features USB3.0, PCIe 2.0, SATA, Gigabit Ethernet, MIPI-CSI for embedded applications. It is the ideal solution for POS, vending, infotainment, Medical. ROM-5780 is paired with the Advantech ROM-DB5901 SMARC2.0 development board for faster end product peripheral integration and time-to-market. The reference schematics and layout checklist documentations for carrier board development will be provided along with the open-sourced Linux BSP, test utilities, hardware design utilities and reference drivers.

== '''訂購資訊(Ordering Information)''' ==

[[File:ROM-5780 orderinfo.jpg|RTENOTITLE]]

== '''規格（Specifications）''' ==

'''[[File:ROM-5780 Specifications.png|RTENOTITLE]]'''

== '''框圖（Block Diagram）''' ==

[[File:ROM-5780 Block Diagram.png|RTENOTITLE]]

== '''接口布局和尺寸(Layout and Sizes)''' ==

=== '''ROM-5780 接口布局圖 Board Dimension Layout''' ===

[[File:ROM-5780 module board.jpg|RTENOTITLE]]

=== '''Board Connectors''' ===

'''The board has one switch that allows you to configure your system.'''

[[File:ROM-5780 Board.png|RTENOTITLE]]

=== '''Connector List''' ===

'''Switch'''

{| style="width:500px; border:undefined"
|-
| '''Position'''
| '''Description'''
|-
| SW1
| UART & Debug Port selection
|-
| SW2
| AT& ATX mode selection
|}

'''SW1: UART & Debug Port Selection'''

{| style="width:500px; border:undefined"
|-
| '''Setting'''
| '''Function'''
|-
| SW1(2-3)
| Normal UART
|-
| SW1(2-1)
| Debug Console (Default)
|}

'''SW2: AT/ATX Mode Selection'''

{| style="width:500px; border:undefined"
|-
| '''Setting'''
| '''Function'''
|-
| SW2(2-3)
| AT Mode (Default)
|-
| SW2(2-1)
| ATX Mode
|}

 

=== '''ROM-DB5901 接口布局圖 Board Dimension Layout''' ===

[[File:DB-ROM-5901 5620 carrierboard.jpg|RTENOTITLE]]

[[File:ROM-DB5901 IO.jpg|RTENOTITLE]]

 

=== '''主板内置插针式引脚排序方式 (Pin Header defination)''' ===

=== '''Internal I/O''' ===

[[File:ROM-DB5901 IO2.jpg|RTENOTITLE]]

{| style="border:undefined"
|-
| '''Position'''
| '''Description'''
| '''Connector Type'''
|-
| BAT1
| PIN Header for Battery
| WAFER 8P 2.54mm 180D(M) DIP A2543WV2-8P
|-
| BH1
| RTC Battery Holder
| BATTERY HOLDER 24.9*23.4*8.9 CR2032 BH800.4GG
|-
| CAN1
| CANBus Port 1
| BOX HEADER 5x2P 2.54mm 180D(M) DIP 23N6960-10S10
|-
| CAN2
| CANBus Port 2
| BOX HEADER 5x2P 2.54mm 180D(M) DIP 23N6960-10S10
|-
| COM1
| COM Port 1
| BOX HEADER 5x2P 2.54mm 180D(M) DIP 23N6960-10S10
|-
| COM3
| COM Port 3 (Debug Port)
| BOX HEADER 5x2P 2.54mm 180D(M) DIP 23N6960-10S10
|-
| CN4
| PCIex1 Connector 1
| PCIEXPRESS 36P 180D(F) DIP 2EG01817-D2D-DF
|-
| CN5
| PCIex1 Connector 2
| PCIEXPRESS 36P 180D(F) DIP 2EG01817-D2D-DF
|-
| CN6
| PCIex1 Connector 3
| PCIEXPRESS 36P 180D(F) DIP 2EG01817-D2D-DF
|-
| CN11
| SATA Connector
| Serial ATA 7P 1.27mm 180D(M) DIP WATM-07DBN4A3B8
|-
| CN12
| SATA Power Connector
| WAFER 4P 2.5mm 180D(M) DIP 24W1161-04S10-01T
|-
| CN22
| GPIOx8 sets
| PIN HEADER 10x2P 2.0mm 180D(M) DIP 21N22050
|-
| CN25
| MXM 3.0 Connector
| MXM Conn. 314P 90D(F) SMD AS0B821-S78B-7H
|-
| CN26
| M.2 Key E Slots
| NGFF 75P 0.5mm 90D(F) H=4.2mm SMD AS0BC21-S40BE
|-
| CN38
| FAN (Reserved)
| WTB Con. 3P 2.54mm 180D(M) DIP A2543WV0-3P-6T-5e
|-
| CN39
| MIPI-CSI1 (FPC, 4-Lane
| FPC 39P, 0.6mm, H0.9mm
|-
| CN40
| MIPI-CSI0 (FPC, 2-Lane)
| FPC 39P, 0.6mm, H0.9mm
|-
| CN41
| MIPI-CSI0 (Mini-SAS, 2-Lane)
| Mini SAS 36P/0.8mm/(M)/LCP/VA/G15u/ S/BK/W
|-
| CN42
| MIPI-CSI1 (Mini-SAS, 4-Lane)
| Mini SAS 36P/0.8mm/(M)/LCP/VA/G15u/ S/BK/W
|-
| ESPI_CN1
| ESPI
| PIN HEADER 6x2P 2.0mm180D(M) SMD 21N22050-12M00B
|-
| I2C_GP_1
| I2C Pin Header
| WAFER BOX 4P 2.00mm 180D(M) DIP 721-81-04TW00
|-
| I2C_CN3
| Audio Codec Board
| PIN HEADER 2x10P 2.54mm 180D(M) DIP 21N22564
|-
| LVDS0
| LVDS0
| Wafer 2x20P/1.25mm/(M)/NY9T/VA/GFL/ S/WH/W
|-
| LVDS_BK_PWR
| LVDS0 Back Light
| WAFER BOX 5P 2.0mm 180D(M) DIP A2001WV2-5P
|-
| LVDS1
| LVDS1
| Wafer 2x20P/1.25mm/(M)/NY9T/VA/GFL/ S/WH/W
|-
| LVDS1_BK_PWR
| LVDS1 Back Light
| WAFER BOX 5P 2.0mm 180D(M) DIP A2001WV2-5P
|-
| SD1
| SD Card Slot
| SD CARD 9P 90D(F) SMD WK2192CS3D- 7H
|-
| SPI_CN1
| SPI Pin Header
| PIN HEADER 4x2P 2.54mm 180D(M) SMD 21N22564
|-
| SW2
| Reset Button
| TACT SW STS-091 SMD 4P H=3.8mm
|-
| SW4
| SLP Button
| TACT SW STS-091 SMD 4P H=3.8mm
|-
| SW5
| Power Button
| TACT SW STS-091 SMD 4P H=3.8mm
|-
| USB0_OTG1
| USB OTG
| Micro USB 5P/0.65mm/(F)/NY9T/GFL/ RA/S/BK/B
|-
| USB-4-5
| USB Port 4, Port 5
| PIN HEADER 2x5P 2.0mm 180D(M) SMD 21N22050
|}

=== '''Rear I/O''' ===

'''[[File:ROM-DB5901 RearIO.jpg|RTENOTITLE]]'''

{| style="border:undefined"
|-
| '''Position'''
| '''Description'''
| '''Name'''
|-
| DCIN
| DC Jack
| A
|-
| CN15A
| UART Port 0
| B
|-
| CN15B
| UART Port 2
| C
|-
| CN1A
| DP Port
| D
|-
| CN1B
| HDMI Port
| E
|-
| CN33
| Type C Controller Programming Header (Reserved Only)
| F
|-
| CN34
| USB Type C
| G
|-
| CN8
| GbE Ethernet Connector Port
| H
|-
| CN3
| USB Port 1/ 2
| I
|-
| Audio1
| MIC Input/ Audio Output
| J
|}

== '''接口引脚定義 (Pin definitions)''' ==

*[[電池(BAT1)_&_電池扣(BH1)|電池(BAT1) & 電池扣(BH1)]]
*[[CAN(CAN1,CAN2)|CAN(CAN1,CAN2)]]
*[[串口(COM_DB(COM3)、COM0、COM1_、COM2)|串口(COM_DB(COM3)、COM1、UART0 、UART2)]]
*[[显示接口(LVDS、HDMI)_LAN接口_USB接口(USB1-2、USB3-4、USB_OTG)_音频接口_电源及指示灯和开关机复位按钮_GPIO接口_MINI_PCIE接口_M.2接口_SPI、I2C_接口|显示接口(LVDS、LVDS Backlight、HDMI、DP)]]
*[[LAN接口|LAN接口(LAN)]]
*[[USB接口(USB1-2、USB_Type_C、USB_OTG)|USB接口(USB1-2、USB-4-5、USB Type C、USB OTG)]]
*[[音频接口(Audio)|音频接口(Audio Output &Audio Codec)]]
*[[电源及指示灯和开关机复位按钮(Power_、LED、Power_Button、Reset_Button、Sleep_Button)|电源及指示灯和开关机复位按钮(Power 、LED、Power Button、Reset Button、Sleep Button)]]
*[[GPIO接口|GPIO接口]]
*[[MINI_PCIE接口_M.2接口_SPI、I2C_接口|MINI_PCIE接口_M.2接口_SPI、I2C_接口]]

== '''机械尺寸 ('''Mechanical Characteristics) ==

*Dimensions: SMARC form factor size: (D x W) 82 x 50 mm/ 3.22 x 1.9 in
*Height on Top: Under 3.0 mm base on SPEC definition (without heat sink)
*Height on Bottom: Under 1.3 mm base on SPEC definition

[[File:ROM-5780 1 Mechanical.png|RTENOTITLE]]

 

[[File:ROM-5780 2 Mechanical.png|RTENOTITLE]]

----

== '''快速入门 (Quick Start)''' ==

=== '''系统下载 (OS Download)''' ===

@@ Line 37: / Line 37: @@
 <span style="color:#e74c3c">[[File:ROM-5780 Board.png|RTENOTITLE]]</span>
 === '''Connector List''' ===
@@ Line 51: / Line 52: @@
 |-
 | style="width: 72px;" | SW2
-| style="width: 222px;" | AT& ATX mode selection
+| style="width: 222px;" | AT & ATX mode selection
 |}

@@ Line 343: / Line 343: @@
 | style="width: 205px;" | &nbsp;
 |}
@@ Line 349: / Line 350: @@
 There are three ways to update images：
-=== '''[http://ess-wiki.advantech.com.tw/view/1._Using_AndroidToool. 1._Using_AndroidToool].''' ===
+=== <u><span style="color:#2980b9;">'''1. Using_AndroidTool.'''</span></u> ===
 There is no limitation by this way.
-=== '''[http://ess-wiki.advantech.com.tw/view/2._Using_storage（such_sd_or_USB_disk）with_update.zip_in_it. 2._Using_storage（such&nbsp;sd_or_USB_disk）with_update.zip_in_it.]''' ===
+=== <u><span style="color:#2980b9;">'''2. Using_storage （such sd or USB disk） with update.zip_in_it.'''</span></u> ===
 There are some&nbsp;limitations：
@@ Line 365: / Line 366: @@
 （3）Using update.zip to upgrade. (see more detail in "Create OTA zip" on how to create update.zip)
-=== '''[http://ess-wiki.advantech.com.tw/view/3._Using_bootup_sd_disk_made_by_SDDiskTool. 3._Using_bootup_sd_disk&nbsp;made_by&nbsp;SDDiskTool.]''' ===
+=== <u>'''<span style="color:#2980b9;">3. Using bootup_sd_disk made_by SDDiskTool.</span>'''</u> ===
 （1）Only update images from the same os,&nbsp; eg&nbsp;:&nbsp;

@@ Line 343: / Line 343: @@
 | style="width: 205px;" | &nbsp;
 |}
 == '''Android&nbsp;燒錄方法 (Android&nbsp;Flash eMMC Method)&nbsp;''' ==
@@ Line 348: / Line 349: @@
 There are three ways to update images：
-=== '''[[1._Using_AndroidToool.|1._Using_AndroidToool.]]''' ===
+=== '''[http://ess-wiki.advantech.com.tw/view/1._Using_AndroidToool. 1._Using_AndroidToool].''' ===
 There is no limitation by this way.
-=== '''[[2._Using_storage（such_sd_or_USB_disk）with_update.zip_in_it.|2._Using_storage（such&nbsp;sd_or_USB_disk）with_update.zip_in_it.]]''' ===
+=== '''[http://ess-wiki.advantech.com.tw/view/2._Using_storage（such_sd_or_USB_disk）with_update.zip_in_it. 2._Using_storage（such&nbsp;sd_or_USB_disk）with_update.zip_in_it.]''' ===
 There are some&nbsp;limitations：
@@ Line 364: / Line 365: @@
 （3）Using update.zip to upgrade. (see more detail in "Create OTA zip" on how to create update.zip)
-=== '''[[3._Using_bootup_sd_disk_made_by_SDDiskTool.|3._Using_bootup_sd_disk&nbsp;made_by&nbsp;SDDiskTool.]]''' ===
+=== '''[http://ess-wiki.advantech.com.tw/view/3._Using_bootup_sd_disk_made_by_SDDiskTool. 3._Using_bootup_sd_disk&nbsp;made_by&nbsp;SDDiskTool.]''' ===
 （1）Only update images from the same os,&nbsp; eg&nbsp;:&nbsp;

@@ Line 319: / Line 319: @@
 == '''快速入门 (Quick Start)''' ==
 === '''系统下载 (OS Download)''' ===
-&nbsp;
+=== '''Android7.12''' ===

@@ Line 42: / Line 42: @@
 '''Switch'''
-{| style="width:500px; border:undefined"
+{| border="1" cellpadding="1" cellspacing="1" style="width: 306px;"
 |-
-| '''Position'''
+| style="width: 72px;" | '''Position'''
-| '''Description'''
+| style="width: 222px;" | '''Description'''
 |-
-| SW1
+| style="width: 72px;" | SW1
-| UART & Debug Port selection
+| style="width: 222px;" | UART & Debug Port selection
 |-
-| SW2
+| style="width: 72px;" | SW2
-| AT& ATX mode selection
+| style="width: 222px;" | AT& ATX mode selection
 |}
 '''SW1: UART & Debug Port Selection'''
-{| style="width:500px; border:undefined"
+{| border="1" cellpadding="1" cellspacing="1" style="width: 306px;"
 |-
-| '''Setting'''
+| style="width: 74px;" | '''Setting'''
-| '''Function'''
+| style="width: 220px;" | '''Function'''
 |-
-| SW1(2-3)
+| style="width: 74px;" | SW1(2-3)
-| Normal UART
+| style="width: 220px;" | Normal UART
 |-
-| SW1(2-1)
+| style="width: 74px;" | SW1(2-1)
-| Debug Console (Default)
+| style="width: 220px;" | Debug Console (Default)
 |}
 '''SW2: AT/ATX Mode Selection'''
-{| style="width:500px; border:undefined"
+{| border="1" cellpadding="1" cellspacing="1" style="width: 304px;"
 |-
-| '''Setting'''
+| style="width: 72px;" | '''Setting'''
-| '''Function'''
+| style="width: 220px;" | '''Function'''
 |-
-| SW2(2-3)
+| style="width: 72px;" | SW2(2-3)
-| AT Mode (Default)
+| style="width: 220px;" | AT Mode (Default)
 |-
-| SW2(2-1)
+| style="width: 72px;" | SW2(2-1)
-| ATX Mode
+| style="width: 220px;" | ATX Mode
 |}
 === '''ROM-DB5901 接口布局圖 Board Dimension Layout''' ===
@@ Line 99: / Line 97: @@
 {| style="border:undefined"
 |-
 | '''Position'''
@@ Line 235: / Line 236: @@
 | USB Port 4, Port 5
 | PIN HEADER 2x5P 2.0mm 180D(M)<br/> SMD 21N22050
 |}
@@ Line 241: / Line 244: @@
 '''[[File:ROM-DB5901 RearIO.jpg|RTENOTITLE]]'''
-{| style="border:undefined"
+{| border="1" cellpadding="1" cellspacing="1" style="width: 477px;"
 |-
-| '''Position'''
+| style="width: 66px;" | '''Position'''
-| '''Description'''
+| style="width: 354px;" | '''Description'''
-| '''Name'''
+| style="width: 40px;" | '''Name'''
 |-
-| DCIN
+| style="width: 66px;" | DCIN
-| DC Jack
+| style="width: 354px;" | DC Jack
-| A
+| style="width: 40px;" | A
 |-
-| CN15A
+| style="width: 66px;" | CN15A
-| UART Port 0
+| style="width: 354px;" | UART Port 0
-| B
+| style="width: 40px;" | B
 |-
-| CN15B
+| style="width: 66px;" | CN15B
-| UART Port 2
+| style="width: 354px;" | UART Port 2
-| C
+| style="width: 40px;" | C
 |-
-| CN1A
+| style="width: 66px;" | CN1A
-| DP Port
+| style="width: 354px;" | DP Port
-| D
+| style="width: 40px;" | D
 |-
-| CN1B
+| style="width: 66px;" | CN1B
-| HDMI Port
+| style="width: 354px;" | HDMI Port
-| E
+| style="width: 40px;" | E
 |-
-| CN33
+| style="width: 66px;" | CN33
-| Type C Controller Programming Header (Reserved Only)
+| style="width: 354px;" | Type C Controller Programming Header (Reserved Only)
-| F
+| style="width: 40px;" | F
 |-
-| CN34
+| style="width: 66px;" | CN34
-| USB Type C
+| style="width: 354px;" | USB Type C
-| G
+| style="width: 40px;" | G
 |-
-| CN8
+| style="width: 66px;" | CN8
-| GbE Ethernet Connector Port
+| style="width: 354px;" | GbE Ethernet Connector Port
-| H
+| style="width: 40px;" | H
 |-
-| CN3
+| style="width: 66px;" | CN3
-| USB Port 1/ 2
+| style="width: 354px;" | USB Port 1/ 2
-| I
+| style="width: 40px;" | I
 |-
-| Audio1
+| style="width: 66px;" | Audio1
-| MIC Input/ Audio Output
+| style="width: 354px;" | MIC Input/ Audio Output
-| J
+| style="width: 40px;" | J
 |}