Xingxing.li at 03:18, 23 August 2024

2024-08-23T03:18:54Z

Xingxing.li: Created page with " == '''产品特性(Features)''' == Rockchip RK3568 Arm Quad Cortex-A55 up to 2.0GHz Onboard 2/4GB LPDDR4 memory and 16/32GB eMMC *Support 1 x HDMI2.0 4K, 1 x signal LVDS..."

2024-08-23T03:17:13Z

Created page with " == '''产品特性(Features)''' == *Rockchip RK3568 Arm Quad Cortex-A55 up to 2.0GHz *Onboard 2/4GB LPDDR4 memory and 16/32GB eMMC *Support 1 x HDMI2.0 4K, 1 x signal LVDS..."

New page

== '''产品特性(Features)''' ==

*Rockchip RK3568 Arm Quad Cortex-A55 up to 2.0GHz
*Onboard 2/4GB LPDDR4 memory and 16/32GB eMMC
*Support 1 x HDMI2.0 4K, 1 x signal LVDS or 1 x MIPI DSI 
*Support 4K H.264/H.265 Video decoder
*2 x USB3.0, 2 x USB2.0, 4 x UART, 14 x GPIO
*2 x PCIe3.0, 1 x SATA, 1 x MIPI CSI, 2 x Gigabit LAN
*Support Linux & Android

=== '''产品官网链接（Product official website link）''' ===

[https://www.advantech.com.cn/zh-cn/products/77b59009-31a9-4751-bee1-45827a844421/rom-5880/mod_e0d210fc-532a-4075-896f-0b80c13380fc ROM-5880 - 基于瑞芯微RK3568平台的SMARC2.1核心模块 - 研华 (advantech.com.cn)]

== '''接口布局和尺寸（Layout and Sizes）''' ==

=== '''ROM-5880接口布局图 Board Dimension Layout''' ===

[[File:ROM-5880 Connector Location.png|RTENOTITLE]]

=== '''Connector List''' ===

'''Debug'''

{| border="1" cellpadding="1" cellspacing="1"
|-
| '''Position'''
| '''Description'''
|-
| DEBUG
| DEBUG Port
|}

'''Switch'''

{| border="1" cellpadding="1" cellspacing="1"
|-
| '''Position'''
| '''Description'''
|-
| SW1
| AT&ATX mode selection
|}

'''SW1：AT/ATX Mode Selection'''

{| border="1" cellpadding="1" cellspacing="1"
|-
| '''Setting'''
| '''Function'''
|-
| 1 off  2 on
| AT Mode（Default）
|-
| 1 on 2 off
| ATX Mode
|}

[[File:ROM-5880 AT ATX mode.png|RTENOTITLE]]

=== '''SOM-DB2510 A1 Board Dimension Layout''' ===

The figures below indicate the main chips on SOM-DB2510 Development Board for  SMARC 2.1.

[[File:SOM-DB2510.PNG|RTENOTITLE]]

=== '''SOM-DB2510 Connectors and Jumper Settings''' ===

'''Connector Locations'''

[[File:SOM-DB2510 Connector Locations.png|RTENOTITLE]]

[[File:SOM-DB2510 Connect Locations 1.png|RTENOTITLE]]

'''Switch Locations'''

[[File:SOM-DB2510 Switch Locations.png|RTENOTITLE]]

'''I/O Connctor Locations'''

[[File:SOM-DB2510 IO Connector Locations.png|RTENOTITLE]]

'''Button Locations'''

[[File:SOM-DB2510 Button Locations.png|RTENOTITLE]]

'''LED Locations'''

[[File:SOM-DB2510 LED Locations.png|RTENOTITLE]]

{| border="1" cellpadding="1" cellspacing="1"
|-
| '''Label'''
| '''Function'''
| '''Label'''
| '''Function'''
|-
| ATX1
| ATX Connector
| FAN1
| Smart Fan Connector
|-
| SMARC_IN1
| Wide Range Input Power Connector (3V~5.25V)
| FAN2
| System Fan Connector
|-
| DCIN1
| DCIN connector
| CAN0_1
| CAN Bus Connector
|-
| DP0_HDMI
| DP & HDMI Connector
| USB0
| USB OTG Connector
|-
| USB12
| USB 2.0 port1~2 & USB 3.0 port0 Connector
| COM1_3
| COM Port Port1,3 Connector
|-
| TYPEC_DP1
| Type-C Connector
| COM2_4
| COM Port Port2,4 Connector
|-
| LAN0_LAN1
| LAN0 & LAN1 Connector
| CN8
| I2C connector for I2C_PM
|-
| LOUT1
| Line Out Connector
| CN7
| I2C Connector for I2C_GP
|-
| MIC1
| MIC1 Connector
| CN10
| eSPI Pin Header
|-
| CN1_MXM1
| SMARC Connector
| SATAP1
| SATA Power Connector
|-
| PCIEA-X4
| PCIe x4 Connector
| CSI0_B2B
| MIPI B2B Connector for 2M Camera
|-
| SATA1
| SATA Port0 Connector
| CSI1_B2B
| MIPI B2B Connector for 8M & 13M Camera
|-
| PCIED-X1
| PCIe x1 Connector
| SPI_BIOS1
| Carrier Board BIOS Socket (SOIC)
|-
| M2
| M.2 Key-E Connector
| BAT1
| Coin battery holder
|-
| MPCIE_C
| Mini PCIe Connector
| BAT2
| Smart battery Connector
|-
| SIM
| SIM card Connector
| LINEOUT_1
| I2S Headphone Connector
|-
| LVDS1
| LVDS1 Connector
| MIC_1
| I2S MIC In Connector
|-
| LVDS0
| LVDS0 Connector
| CSI1_FPC
| MIPI FPC Connector for 8M & 13M Camera
|-
| LVDS1_INVERTER
| LVDS1 Invertor Connector
| CSI0_FPC
| MIPI FPC Connector for 2M Camera
|-
| LVDS0_INVERTER
| LVDS0 Invertor Connector
| CN5
| I2S2 Connector
|-
| SPI_BIOS2
| Carrier Board BIOS Socket (QFN)
| CN17
| I2S0 Connector
|-
| SD
| SD Card Connector
|  
|  
|}

'''Jumper Locations'''

[[File:SOM DB2510 Jumper Locations.png|RTENOTITLE]]

[[File:SOM-DB2510 Jumper Locations1.png|RTENOTITLE]]

{| border="1" cellpadding="1" cellspacing="1"
|-
| Lable
| Function
| Lable
| Function
|-
| BTN3
| Sleep Button
| J14
| EDP1/LVDS1 Hot-Plug Detect Selection Header
|-
| BTN1
| Power Button
| J56
| Standby Voltage Control Header
|-
| BTN2
| Reset Button
| J44
| Module +3.3V/+5V Power Selection Header
|-
| SW4
| BOOT SELECT Switch
| PSON1
| AT/ATX Selection Header
|-
| LID1
| LID Switch
| SPI_CN1
| SPI Header
|-
| J30
| Enable Battery Low# Header
| CN14
| For CAN Bus port0 Terminal Resistor
|-
| M2E_DISABLE_N1
| M.2 Wireless Disable
| CN15
| For CAN Bus port1 Terminal Resistor
|-
| J29
| SMB Alert Enable Header
| J3/J4
| DP0 EQ0 Selection
|-
| CN9
| Header For GPIO Test
| J5/J6
| DP0 EQ1 Selection
|-
| J7/J8
| LVDS0 Power Selection Header
| J58
| PCIE_B_CKREQ# Selection
|-
| J11/J12
| LVDS1 Power Selection Header
| J59
| PCIE_A_CKREQ# Selection
|-
| J9
| LVDS0 Inverter Power Selection Heade
| GPIO_0
| GPIO0/CAM0_PWR# Selection
|-
| J10
| EDP0/LVDS0 Hot-Plug Detect Selection Header
| GPIO_1
| GPIO1/CAM1_PWR# Selection
|-
| J26
| HDA/I2S Selection Header
| GPIO_2
| GPIO2/CAM0_RST# Selection
|-
| J1
| DP1/HDMI1 Select
| GPIO_3
| GPIO3/CAM1_RST# Selection
|-
| J13
| LVDS1 Inverter Power Selection Header
| GPIO_4
| GPIO4/HDA_RST# Selection
|-
| J31
| Clear CMOS Header
| GPIO_5
| GPIO5/PWM_OUT Selection
|-
| J25
| SPI Power Header
| GPIO_6
| GPIO6/TACHIN Selection
|-
| SW1
| COM1 mode Select
| SATA_ACT_PH1
| SATA act# Header
|-
| SW2
| COM3 mode Select
| PWRBTN_PH1
| Power button Header
|-
| J41
| Core Power Voltage Control Header
| SYS_RESET_PH1
| Reset button Header
|-
| J2
| DDI1 AUX/DDC Selection
|  
|  
|}

=== '''LED Function List ''' ===

{| border="1" cellpadding="1" cellspacing="1"
|-
| Location
| Function
|-
| MODULE_VIN_LED1
| WDT_TIME_OUT# Indicate
|-
| MODULE_5V_LED
| Module 5V Indicate
|-
| MODULE_VIN_LED
| Module +V_MOD_IN Indicate
|-
| RESET_OUT_LED
| RESET_OUT Indicate
|-
| RESET_OUT_LED
| CARRIER_STBY Indicate
|-
| CARRIER_PWR_ON_LED
| CARRIER_PWR_ON Indicate
|-
| MODULE_3P3V_LED
| Module 3.3V Indicate
|-
| 3P3V_LED
| Carrier Board +V3.3 Indicate
|-
| 5V_LED
| Carrier Board +V5 Indicate
|-
| 5V_DUAL_LED
| Carrier Board +V5SB Indicate
|-
| 3P3V_DUAL_LED
| Carrier Board +V3.3SB Indicate
|-
| 5VA_LED
| Carrier Board +V5D_MOD Indicate
|-
| SATA_LED
| SATA Indicate
|-
| SOM_LED
| SOM BOM Indicate
|-
| RISC_LED
| RISC BOM Indicate
|}

=== '''Switch Settings'''  ===

*[[SW4|SW4]] (Boot Select/Force Recovery/Test Switches)
*[[LID1|LID1]] (LID Button Enable/Disable Switches)
*[[SW5|SW5 ]](LAN CONN LED Pull High Switches)
*[[COM0_Settings|SW1]](COM0 Settings)
*[[SW2|SW2]](COM2 Settings)
*[[I2S_Clock_Settings|SW3 ]](I2S Clock Settings)
*[[M2E_DISABLE_N1|M2E_DISABLE_N1]](M.2 Wireless Disable Switch)

=== '''接口引脚定義 (Connector Pin definitions)''' ===

*[[ATX1_Pin_Connector| ATX1 Pin Connector]]
*[[SMARC_IN1_Pin_Connectors|SMARC_IN1 Pin Connectors]]
*[[BAT1_RTC_Battery_Connectors|BAT1 RTC Battery Connectors]]
*[[DCIN1_DC-IN_Power_Connectors|DCIN1 DC-IN Power Connectors]]
*[[CAN0_1_CAN_Bus_Connectors|CAN0_1 CAN Bus Connectors]]
*[[CN9_GPIO_Headers|CN9 GPIO Headers]]
*[[COM2_4_COM_Port2&4_Connectors|COM2_4 COM Port2&4 Connectors]]
*[[COM1_3_COM_Port1&_3_Connectors|COM1_3 COM Port1& 3 Connectors]]
*[[CN10_ESPI_Headers|CN10 ESPI Headers]]
*[[LVDS0_LVDS_Connectors|LVDS0 LVDS Connectors]]
*[[LVDS0_INVERTER_LVDS_INVERTER_Connectors|LVDS0_INVERTER LVDS INVERTER Connectors]]
*[[LVDS1_LVDS_Connectors|LVDS1 LVDS Connectors]]
*[[LVDS1_INVERTER_LVDS_INVERTER_Connectors|LVDS1_INVERTER LVDS INVERTER Connectors]]
*[[CN7_I2C_GP_Connectors|CN7 I2C_GP Connectors]]
*[[SPI_CN1_SPI_Connectors|SPI_CN1 SPI Connectors]]
*[[SATAP1_SATA_PWR_Connectors|SATAP1 SATA PWR Connectors]]
*[[CSI0_FPC_Connectors|CSI0_FPC Connectors]]
*[[CSI1_FPC_Connectors|CSI1_FPC Connectors]]
*[[CN5_I2S2_Connectors|CN5 I2S2 Connectors]]
*[[CN17_I2S0_Connectors|CN17 I2S0 Connectors]]
*[[PWRBTN_PH1_PWRBTN_Pin_Headers|PWRBTN_PH1 PWRBTN Pin Headers]]
*[[SYS_RESET_PH1_SYS_RESET_Pin_Headers|SYS_RESET_PH1 SYS RESET Pin Headers]]
*[[SATA_ACT_PH1_SATA_ACT|SATA_ACT_PH1 SATA ACT# Pin Headers]]
*[[J32_Power_LED_Pin_Headers|J32 Power LED Pin Headers]]
*[[J30_BATLOW_Pin_Headers|J30 BATLOW Pin Headers]]
*[[J29_SMBUS_Alert_Pin_Headers|J29 SMBUS Alert Pin Headers]]
*[[J41_Core_Power_Controls|J41 Core Power Controls]]
*[[PSON1_ATX/AT_Mode_Selection|PSON1 ATX/AT Mode Selection]]
*[[J56_Standby_Power_Controls|J56 Standby Power Controls]]
*[[J44_Module_Power_Settings|J44 Module Power Settings]]
*[[J7,J8_LVDS0_Power_Selection|J7,J8 LVDS0 Power Selection]]
*[[J9_LVDS0_Inverter_Power_Selection|J9 LVDS0 Inverter Power Selection]]
*[[J11,J12_LVDS1_Power_Selection|J11,J12 LVDS1 Power Selection]]
*[[LVDS1_Inverter_Power_Selection|LVDS1 Inverter Power Selection]]
*[[EDP0_/LVDS0_HPD_Selection|EDP0 /LVDS0 HPD Selection]]
*[[J14_EDP1/LVDS1_HPD_Selection|J14 EDP1/LVDS1 HPD Selection]]
*[[CN14_CAN0_Terminal_Resistor_Selection|CN14 CAN0 Terminal Resistor Selection]]
*[[CN15_CAN1_Terminal_Resistor_Selection|CN15 CAN1 Terminal Resistor Selection]]
*[[J2_DDI1_AUX/DDC_Selection|J2 DDI1 AUX/DDC Selection]]
*[[J1_DP1/HDMI1_Selection|J1 DP1/HDMI1 Selection]]
*[[J58_PCIE_B_CKREQ|J58 PCIE_B_CKREQ# Selection]]
*[[J59_PCIE_A_CKREQ|J59 PCIE_A_CKREQ# Selection]]
*[[J31_Clear_CMOS|J31 Clear CMOS]]
*[[J25_+V1.8M_SPI_Power_Jumpers|J25 +V1.8M_SPI Power Jumpers]]
*[[GPIO_0_GPIO0_Settings|GPIO_0 GPIO0 Settings]]
*[[GPIO_1_GPIO1_Settings|GPIO_1 GPIO1 Settings]]
*[[GPIO_2_GPIO2_Settings|GPIO_2 GPIO2 Settings]]
*[[GPIO_3_GPIO3_Settings|GPIO_3 GPIO3 Settings]]
*[[GPIO_4_GPIO4_Settings|GPIO_4 GPIO4 Settings]]
*[[GPIO_5_GPIO5_Settings|GPIO_5 GPIO5 Settings]]
*[[GPIO_6_GPIO6_Settings|GPIO_6 GPIO6 Settings]]
*[[J26_HDA/I2S_Selection|J26 HDA/I2S Selection]]

=== '''ROM-5880 机械尺寸（Mechanical Characteristics）''' ===

*'''Dimension: SMARC form factor size: (D x W) 82 x 50 mm/3.22 x 1.9 in'''

[[File:ROM-5880 Dimensions.png|RTENOTITLE]]

*'''Height on top: Under 3.0 mm'''
*'''Height on bottom: Under 2.0 mm'''

[[File:ROM-5880 Mechanical Specifications.png|RTENOTITLE]]

=== '''SOM-DB2510_A1 机械尺寸 ('''Mechanical Characteristics) ===

For more details regarding our 2D/3D models, please visit the Advantech COM support  service website at: [http://com.advantech.com http://com.advantech.com].

=== '''Board Mechanical Diagram -Front''' ===

[[File:SOM-DB2510 Board Mechanical Diagram - Front.png|RTENOTITLE]]

'''Board Mechanical Diagram -Side1'''

[[File:SOM-DB2510 Board Mechanical Diagram Side1.png|RTENOTITLE]]

'''Board Mechanical Diagram -Side2'''

[[File:SOM-DB2510 Board Mechanical Diagram Side2.png|RTENOTITLE]]

 

=== '''Assemblly Diagram''' ===

These figures demonstrate the order of assembly needed when attaching the thermal  module and COM module to the carrier board.

[[File:ROM-5880 for SOM-DB2510 Assembly Diagram.png|RTENOTITLE]]

 

== '''快速入门 (Quick Start)''' ==

=== '''系统下载 (OS Download)''' ===

Note：LIV=Yocto Linux , UIV=Ubuntu，DIV=Debain，AIV=Android 

            LBV=BSP，LIV=Image

{| border="1" cellpadding="1" cellspacing="1"
|-
| '''Platform'''
| '''Product'''
| '''Image Version'''
| '''Release Date'''
| '''Release Version'''
| '''Release notes'''
| '''Image Download'''
| '''BSP Download Tag'''
| '''Comment'''
| '''CAN2.0 Patch'''
|-
| RK3568
| ROM-5880
| DIV130033
| 2023/08/29
| RTM
| [http://ess-wiki.advantech.com.tw/view/AIM-Linux/BSP/RockChip/Linux_Debian_OS_Release_note/ROM-5880/DIV130033 Release_Note]
|
[https://pan.baidu.com/s/1oJb5kMPtSyvsNxmmuebm5A Baidu]      Password：a887

[https://www.dropbox.com/sh/a8tjyodf4a3mxpb/AAAsLlKReCHtnyZzyP-hNOhFa?dl=0 Dropbox]

| RK3568_RISC_DIV130033.xml 
|
'''[https://pan.baidu.com/s/1WeQwXmE409gA4vJxhRqusg?pwd=a887 CAN2.0 Errata ] '''

提取码：a887

| [https://pan.baidu.com/s/1I5MOuiH3uVn2xJjP8VuVVA?pwd=a887 Baidu] Password：a887
|}

*Alpha:  Basic I/O function bring up by RD;

*Beta:  Basic I/O function、performance and middleware verified by RD. Peripherals integrated;

*GA:  Beta version by QE verification;

*RTM:  Beta version by SI/Power/QE verification and pre-loaded;

=== '''Debian 燒錄方法 (Debiand Flash eMMC Method)''' ===

'''1.'''  [[1.Usering_RKTool.|'''Usering_RKTool.''']]

'''2.  [[Using_bootup_sd_disk_made_by_SDDiskTool_for_ROM-5880|Usering bootup_sd_disk made_by SDDiskTool.]]'''

'''3.  [[Upgrade_with_system_command_for_ROM-5880|Upgrade with system command.]]'''

== '''Linux基本使用方法''' ==

*[[Getting_Start（ROM-5880）|'''Getting Start''']]
*'''[[ROM-5880_QT_ToolsChain|QT_ToolsChain]]'''
*[[ROM-5880_NPU_SDK|'''NPU_SDK''']]
*'''MAC_Address'''

== '''Linux BSP编译方法（Linux BSP Compile Method）''' ==

'''[[Linux_BSP_User_Guide_for_rk3568_series_Debian_11|Linux BSP User Guide for rk3568 series Debian 11]]'''

@@ Line 488: / Line 488: @@
 == '''快速入门 (Quick Start)''' ==
 === '''系统下载 (OS Download)''' ===
-Note：LIV=Yocto Linux , UIV=Ubuntu，DIV=Debain，AIV=Android&nbsp;
+Note: '''<span style="color:#ff0000">L</span>'''IV= Yocto Linux , <span style="color:#ff0000">'''U'''</span>IV=Ubuntu , <span style="color:#ff0000">'''D'''</span>IV = Debian , <font color="#ff0000">'''A'''</font>IV = Android, L<span style="color:#ff0000">'''B'''</span>V=BSP , L<span style="color:#ff0000">'''I'''</span>V= Image
-&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; LBV=BSP，LIV=Image
+[http://ess-wiki.advantech.com.tw/view/AIMLinux/NXP/Released_Image Introduction of Released Image]
-{| border="1" cellpadding="1" cellspacing="1"
+{| border="2"
 |-
 | '''Product'''
 | '''Image Version'''
@@ Line 505: / Line 509: @@
 | '''Image Download'''
 | '''BSP Download Tag'''
 | '''Comment'''
-| '''CAN2.0 Patch'''
+| '''Test Report'''
 |-
-| RK3568
+| colspan="1" | ROM-5880
-| ROM-5880
+| DIV130331
-| DIV130033
+| 2024/08/16
-| 2023/08/29
+| Beta
+|
-'''[https://pan.baidu.com/s/1WeQwXmE409gA4vJxhRqusg?pwd=a887 CAN2.0 Errata&nbsp;]&nbsp;'''
+[[ROM-5880_Debian11_Release_Notes|Release_Note]]
-提取码：a887
+| [https://pan.baidu.com/s/1d7k2PDHbxyIgBAWkt0nvJA?pwd=A887 Baidu]<br/> Password：a887
-| [https://pan.baidu.com/s/1I5MOuiH3uVn2xJjP8VuVVA?pwd=a887 Baidu]&nbsp;Password：a887
+| RK3568_RISC_DIV130331.xml
 |}
-*Alpha: &nbsp;Basic I/O function bring up by RD;
+*Alpha: Basic I/O function bring up by RD;
-*Beta: &nbsp;Basic I/O function、performance and middleware verified by RD. Peripherals integrated;
+*Beta: Basic I/O function、performance and middleware verified by RD. Peripherals integrated;
-*GA: &nbsp;Beta version by QE verification;
+*GA: Beta version by QE verification;
-*RTM: &nbsp;Beta version by SI/Power/QE verification and pre-loaded;
+*RTM: Beta version by SI/Power/QE verification and pre-loaded;
 === '''Debian 燒錄方法 (Debiand Flash eMMC Method)''' ===

ROM-5880 Debian11 user guide - Revision history

Xingxing.li at 03:18, 23 August 2024

Xingxing.li: Created page with " == '''产品特性(Features)''' == *Rockchip RK3568 Arm Quad Cortex-A55 up to 2.0GHz *Onboard 2/4GB LPDDR4 memory and 16/32GB eMMC *Support 1 x HDMI2.0 4K, 1 x signal LVDS..."

Xingxing.li: Created page with " == '''产品特性(Features)''' == Rockchip RK3568 Arm Quad Cortex-A55 up to 2.0GHz Onboard 2/4GB LPDDR4 memory and 16/32GB eMMC *Support 1 x HDMI2.0 4K, 1 x signal LVDS..."