ROM-6881 Audio - Revision history

Xingxing.li at 09:28, 25 July 2025

2025-07-25T09:28:13Z

Xingxing.li at 01:50, 23 July 2025

2025-07-23T01:50:15Z

Xingxing.li at 01:10, 23 July 2025

2025-07-23T01:10:22Z

Xingxing.li: Created page with " === '''Audio Test''' === Before the test, you need to prepare an audio card (ROM-EG57), a microphone and headphones. The test environment is shown in the picture below: F..."

2025-07-17T01:39:26Z

Created page with " === '''Audio Test''' === Before the test, you need to prepare an audio card (ROM-EG57), a microphone and headphones. The test environment is shown in the picture below: F..."

New page

=== '''Audio Test''' ===

Before the test, you need to prepare an audio card (ROM-EG57), a microphone and headphones. The test environment is shown in the picture below:

[[File:ROM-6881 Audio.png]]

'''1、Get Audio board ID'''
<pre># cat /proc/asound/cards
0 [rockchiprt5640c]: rockchip_rt5640 - rockchip,rt5640-codec
rockchip,rt5640-codec
1 [rockchiphdmi0 ]: rockchip-hdmi0 - rockchip-hdmi0
rockchip-hdmi0
2 [rockchipdp0 ]: rockchip-dp0 - rockchip-dp0
rockchip-dp0
</pre>

'''2、Record'''

       Take Card ID 0 for example：
<pre># arecord -Dplughw:0,0 -f S16_LE -r 16000 -d 10 -t wav test.wav
</pre>

'''3、Playback'''

      Take Card ID 0 for example:
<pre># aplay -Dplughw:0,0 -t wav test.wav
</pre>

'''RK Tool  Function：'''
<pre># /tools/test/adv/audio/audio_record_test.sh 1
# /tools/test/adv/audio/audio_play_test.sh 1
</pre>

@@ Line 4: / Line 4: @@
 Before the test, you need to prepare an audio card (ROM-EG57), a microphone and a pair of headphones. The test and jumper setup environment is as shown in the following picture.[[File:ROM-6881 Audio.png|RTENOTITLE]]
-'''1、Get Audio board ID'''
+'''1、Record<br/> Take Card ID 0 as an example:<br/> Change CARD_ID=0 according "Get the Audio board ID".'''
-<pre>cat /proc/asound/cards
+<pre># cat /proc/asound/cards
 </pre>
 '''2、Record'''
 &nbsp; &nbsp; &nbsp; &nbsp;Take Card ID 0 for example：
-<pre>arecord -Dplughw:0,0 -f S16_LE -r 16000 -d 10 -t wav test.wav
+<pre># arecord -Dplughw:$CARD_ID,0 -f S16_LE -r 16000 -d 10 -t wav test.wav
 </pre>
 '''3、Playback'''
-&nbsp; &nbsp; &nbsp;&nbsp;Take Card ID 0 for example:
+&nbsp; &nbsp; &nbsp;Take Card ID 0 as an example:<br/> &nbsp; &nbsp; &nbsp; Change CARD_ID=0 according "Get the Audio board ID".
-<pre>aplay -Dplughw:0,0 -t wav test.wav
+<pre># CARD_ID=0
 </pre>

@@ Line 2: / Line 2: @@
 === '''Audio Test''' ===
-Before the test, you need to prepare an audio card (ROM-EG57), a microphone and headphones. The test environment is shown in the picture below:
+Before the test, you need to prepare an audio card (ROM-EG57), a microphone and a pair of headphones. The test and jumper setup environment is as shown in the following picture.[[File:ROM-6881 Audio.png|RTENOTITLE]]
 '''1、Get Audio board ID'''
@@ Line 26: / Line 24: @@
 '''RK Tool&nbsp; Function：'''
-<pre>/tools/test/adv/audio/audio_record_test.sh 1
+<pre>/tools/test/adv/audio/audio_record_test.sh 0
-/tools/test/adv/audio/audio_play_test.sh 1
+/tools/test/adv/audio/audio_play_test.sh 0
 </pre>