Difference between revisions of "IoTGateway/BSP/Linux"

From ESS-WIKI
Jump to: navigation, search
(add i.MX7 information)
(→‎FAQ)
 
(203 intermediate revisions by 18 users not shown)
Line 1: Line 1:
 +
 
{{DISPLAYTITLE:Linux BSP}}
 
{{DISPLAYTITLE:Linux BSP}}
  
−
== i.MX6 ==
+
= '''i.MX6''' =
  
−
=== [[IoTGateway/BSP/Linux/iMX6/Technical_Specification|Technical Specification]] ===
+
=== '''RISC Image Naming Rule''' ===
  
−
=== [[IoTGateway/BSP/Linux/iMX6/OS_Support_List|OS Support List(based on Yocto 1.5~Yocto 2.0)]] ===
+
*[[RISC_Image_Naming_Rule|<span style="color:#336699">RISC Image Naming Rule</span>]]  
  
−
=== [[IoTGateway/BSP/Linux/iMX6/OS_Support_List_new|OS Support List(based on Yocto 2.1 and later)]] ===
+
=== '''Technical Specification''' ===
  
−
=== [[IoTGateway/BSP/Linux/iMX6/DDR_Support_List|DDR Support List]] ===
+
*[[IoTGateway/BSP/Linux/iMX6/Technical_Specification|Technical Specification]]  
  
−
=== [[IoTGateway/BSP/Linux/iMX6/Yocto_LBV3_User_Guide|Version 3 (based on Yocto 1.5) User Guide]] ===
+
=== '''OS support list (Get BSP & image)''' ===
  
−
*[[IoTGateway/BSP/Linux/iMX6/Eclipse_Plug-in|Eclipse Plug-in]]
+
*[[IoTGateway/BSP/Linux/iMX6/OS_Support_List|OS Support List(based on Yocto 1.5~Yocto 2.0)]]
−
*[[IoTGateway/BSP/Linux/iMX6/QtCreator|QtCreator]]
+
*[[IoTGateway/BSP/Linux/iMX6/OS_Support_List_new|OS Support List(based on Yocto 2.1 and later)]]
 +
*[[IoTGateway/BSP/Linux/iMX6/OS_Support_List_Yocto_2.5|OS Support List(based on Yocto 2.5)]]
 +
*[[IoTGateway/BSP/Linux/iMX6/OS_Support_List_Yocto_3.3_release|OS Support List release(based on Yocto 3.3)]]
 +
*[http://ess-wiki.advantech.com.tw/view/AIM-Linux/BSP/NXP/Linux_Yocto_OS_Release_note/Yocto4.0/Internal OS Support List release(based on Yocto 4.0)]  
 +
*[[IoTGateway/BSP/Linux/iMX6/DDR_Support_List|DDR Support List]]
  
−
=== [[IoTGateway/BSP/Linux/iMX6/Yocto_LBV5_User_Guide|Version 5 (based on Yocto 1.7) User Guide]] ===
+
=== '''User Guide''' ===
  
−
=== [[IoTGateway/BSP/Linux/iMX6/Yocto_LBV6_User_Guide|Version 6 (based on Yocto 1.8) User Guide]] ===
+
*[[IoTGateway/BSP/Linux/iMX6/Yocto_LBV3_User_Guide|Version 3 (based on Yocto 1.5) User Guide]]
 +
**[[IoTGateway/BSP/Linux/iMX6/Eclipse_Plug-in|Eclipse Plug-in]]
 +
**[[IoTGateway/BSP/Linux/iMX6/QtCreator|QtCreator]] 
 +
*[[IoTGateway/BSP/Linux/iMX6/Yocto_LBV5_User_Guide|Version 5 (based on Yocto 1.7) User Guide]]
 +
*[[IoTGateway/BSP/Linux/iMX6/Yocto_LBV6_User_Guide|Version 6 (based on Yocto 1.8) User Guide]]  
 +
**[[IoTGateway/BSP/Linux/iMX6/Bluetooth_Testing_Guide|Bluetooth Testing Guide]] 
 +
*[[IoTGateway/BSP/Linux/iMX6/Yocto_LBV7_User_Guide|Version 7 (based on Yocto 2.0) User Guide]]
 +
*​[[IoTGateway/BSP/Linux/iMX6/Yocto_LBV8_User_Guide|Version 8 (based on Yocto 2.1) User Guide]]
 +
*​[[IoTGateway/BSP/Linux/iMX6/Yocto_LBVB_User_Guide|Version B (based on Yocto 3.3) User Guide]]
 +
*​[[IoTGateway/BSP/Linux/iMX6/Yocto_LBVC_User_Guide|Version C (based on Yocto 4.0) User Guide]]
 +
*​[[IoTGateway/BSP/Linux/iMX6/Yocto_LBVD_User_Guide|Version D (based on Yocto 4.2) User Guide]]
 +
**[[IoTGateway/BSP/Linux/iMX6/InstallDocker|How to install Docker on i.MX6 Debian]] 
 +
*[[IoTGateway/BSP/Linux/iMX6/Mfgtool|Mfgtool]]
  
−
*[[IoTGateway/BSP/Linux/iMX6/Bluetooth_Testing_Guide|Bluetooth Testing Guide]]
+
=== FAQ ===
  
−
=== [[IoTGateway/BSP/Linux/iMX6/Yocto_LBV7_User_Guide|Version 7 (based on Yocto 2.0) User Guide]] ===
+
*[[IoTGateway/BSP/Linux/iMX6/FAQ|FAQ]]
  
−
=== [[IoTGateway/BSP/Linux/iMX6/Yocto_LBV8_User_Guide|Version 8 (based on Yocto 2.1) User Guide]] ===
+
*[[IoTGateway/BSP/Linux/iMX6/2038y|2038y_issue_on_imx6_solution]]
  
−
*[[IoTGateway/BSP/Linux/iMX6/BuildingUbuntuRootfs|Building Ubuntu Rootfs for i.MX6]]
+
= i.MX7 =
−
*[[IoTGateway/BSP/Linux/iMX6/How_To_Update_Ubuntu/Debian_Rootfs|How_To_Update_Ubuntu/Debian_Rootfs on i.MX6 platform]]
 
−
*[[IoTGateway/BSP/Linux/iMX6/InstallDocker|How to install Docker on i.MX6 Debian]]
 
  
−
=== [[IoTGateway/BSP/Linux/iMX6/Mfgtool|Mfgtool]] ===
+
=== [[IoTGateway/BSP/Linux/iMX7/OS_Support_List_new|OS Support List(based on Yocto 2.1 and later)]] ===
  
−
=== [[IoTGateway/BSP/Linux/iMX6/FAQ|FAQ]] ===
+
=== [[IoTGateway/BSP/Linux/iMX7/Yocto_LBV8_User_Guide|Version 8 (based on Yocto 2.1) User Guide]] ===
  
−
== i.MX7 ==
+
= '''i.MX8''' =
  
−
{{DISPLAYTITLE:Yocto Linux BSP Ver.8 User Guide for iMX7 series}} <!--
+
=== '''OS support (get BSP & image)''' ===
−
{| align="right"
 
−
| <span class="fck_mw_magic" _fck_mw_customtag="true" _fck_mw_tagname="TOC" _fck_mw_tagtype="c">_</span>
 
−
|}
 
−
-->
 
  
−
= Getting Started =
+
*[[IoTGateway/BSP/Linux/iMX8/OS_Support_List|OS Support List(based on Yocto 2.5 and later)]]
 +
*[http://ess-wiki.advantech.com.tw/view/IoTGateway/BSP/Linux/iMX8/OS_Support_List_3.0 OS Support List(based on Yocto 3.0)]
 +
*[[IoTGateway/BSP/Linux/iMX8/OS_Support_List_3.3_release|OS Support List release(based on Yocto 3.3)]]
  
−
== <span style="color:#0070c0">Conventions</span> ==
+
*[http://ess-wiki.advantech.com.tw/view/AIM-Linux/BSP/NXP/Linux_Yocto_OS_Release_note/Yocto2.5/Internal New OS Support List(based on Yocto 2.5)]
 +
*[http://ess-wiki.advantech.com.tw/view/AIM-Linux/BSP/NXP/Linux_Yocto_OS_Release_note/Yocto3.0/Internal New OS Support List(based on Yocto 3.0)]
 +
*[http://ess-wiki.advantech.com.tw/view/AIM-Linux/BSP/NXP/Linux_Yocto_OS_Release_note/Yocto4.0/Internal New OS Support List(based on Yocto 4.0]
 +
*[http://ess-wiki.advantech.com.tw/view/AIM-Linux/BSP/NXP/Linux_Yocto_OS_Release_note/Yocto4.2/Internal New OS Support List(based on Yocto 4.2)]
  
−
<span style="color:purple">'''${PREBUILT_IMAGE}'''</span>&nbsp;: compressed prebuilt image (*.img.gz)
+
=== '''User Guide''' ===
  
−
<span style="color:purple">'''${CONTAINER_NAME}'''</span>&nbsp;: container name (e.g. imx6LBV8040)
+
*[[IoTGateway/BSP/Linux/iMX8/Yocto_LBV9_User_Guide|Version 9 (based on Yocto 2.5) User Guide]]
 +
*[[IoTGateway/BSP/Linux/iMX8/Qt5Creator|Qt5Creator]]
 +
*[[IoTGateway/BSP/Linux/iMX8/Yocto_LBVA_User_Guide|Version A (based on Yocto 3.0) User Guide]]
 +
*[[IoTGateway/BSP/Linux/iMX8/Yocto_LBVB_User_Guide|Version B (based on Yocto 3.3) User Guide]]
 +
*[[IoTGateway/BSP/Linux/iMX8/Yocto_LBVC_User_Guide|Version C (based on Yocto 4.0) User Guide]]
 +
*[[IoTGateway/BSP/Linux/iMX8/Yocto_LBVD_User_Guide|Version D (based on Yocto 4.2) User Guide]]
 +
*[[IoTGateway/BSP/Linux/iMX8/Build_Instructions|Build Instructions]]
 +
*Debian​
 +
**[[IoTGateway/BSP/Linux/Debian/How_to_Create_Debian10_Rootfs_Base|How to create Debian 10 rootfs base]]
 +
**[[IoTGateway/BSP/Linux/Debian/How_to_create_Debian10_SDcard_image|How to create Debian 10 SD card image]]
  
−
<span style="color:purple">'''${BSP_TARBALL}'''</span>&nbsp;: BSP tarball (*.tgz)
+
=== [[IoTGateway/BSP/Linux/iMX8/FAQ|FAQ]] ===
  
−
<span style="color:purple">'''${BSP_HOME}'''</span>&nbsp;: home directory of the BSP
+
= '''NXP i.MX eIQ Machine Learning''' =
  
−
<span style="color:purple">'''${BDIR}'''</span>&nbsp;: build directory (e.g. build_x11)
+
*[[NXP eIQ|NXP eIQ]]
  
−
<span style="color:purple">'''${MX7PROC}'''</span>&nbsp;: i.MX7 Processor
+
= Quark =
  
−
:mx7d for iMX7 Dual Core
+
=== '''OS support list''' ===
  
−
<span style="color:purple">'''${IMX7PROC}'''</span>&nbsp;: i.MX7 Processor
+
*[[IoTGateway/BSP/Linux/Quark/OS_Support_List|OS Support List]]
  
−
:imx7d
+
=== '''User Guide''' ===
  
−
<span style="color:purple">'''${BOARD}'''</span>&nbsp;: available target boards list below
+
*[[IoTGateway/BSP/Linux/Quark/Yocto_LBV1_User_Guide|Version 1 User Guide]]
  
−
:ebcrm01
+
:This version is based on Intel Quark BSP v1.0.4 (Yocto 1.4.2).
  
−
<span style="color:purple">'''${BOARD_REV}'''</span>&nbsp;: board revision
+
*[[IoTGateway/BSP/Linux/Quark/Yocto_LBV2_User_Guide|Version 2 User Guide]]
  
−
:a1
+
:This version is based on Intel Quark BSP v1.2.0 (Yocto 1.7.2).
 +
<ul style="margin-left: 40px;">
 +
<li>[[IoTGateway/BSP/Linux/Quark/Bluetooth_Testing_Guide|Bluetooth Testing Guide]]</li>
 +
<li>[[IoTGateway/BSP/Linux/Quark/Getting_BSP_from_GitHub|Getting the BSP from GitHub]]</li>
 +
</ul>
  
−
<span style="color:purple">'''${MC}'''</span>&nbsp;: machine code combined with <span style="color:purple">'''${IMX6PROC}${BOARD}${BOARD_REV}'''</span>
+
:
 +
::There is a [[IoTGateway/BSP/Linux/Quark/Getting_BSP_from_GitHub#Supported_version|newer version]] which is based on Intel Quark BSP v1.2.1.1 (Yocto 1.7.2). 
  
−
:for example,
+
*[[IoTGateway/BSP/Linux/Quark/BuildingDebianJessieRootfs|Building Debian (Jessie) Rootfs for Quark]]
  
−
::<tt>imx7debcrm01a1 for EBC-RM01 A1</tt>
+
=== '''FAQ''' ===
  
−
<span style="color:purple">'''${MEM_SIZE}'''</span>&nbsp;: memory size
+
*[[IoTGateway/BSP/Linux/Quark/FAQ|FAQ]]
  
−
:2G
+
= APQ8016 =
  
−
<span style="color:purple">'''${SD_DEVICE}'''</span>&nbsp;: device name of SD card in Linux (e.g. /dev/sdf)
+
=== [[IoTGateway/BSP/Linux/APQ8016/OS_Support_List|OS Support List]] ===
  
−
<span style="color:purple">'''${SDCARD_IMAGE}'''</span>&nbsp;: sdcard image built by bitbake (*.sdcard)
+
=== Linux BSP User Guide ===
  
−
<span style="color:purple">'''${WORKSPACE}'''</span>&nbsp;:&nbsp;host workspace folders
+
*[[IoTGateway/BSP/Linux/APQ8016/BSP_User_Guide_V1|Version 1 (Yocto 2.1 & Debian 9)]]
  
−
<span style="color:purple">'''${UBOOT}'''</span>&nbsp;:u-boot version(e.g. 2016.03)
+
=== [[IoTGateway/BSP/Linux/APQ8016/FAQ|FAQ]] ===
  
−
<span style="color:purple">'''${KERNEL}'''</span>&nbsp;: linux kernel version(e.g. 4.1.15)
+
= '''AM335x''' =
  
−
<span style="color:purple">'''${TOOLCHAIN}'''</span>&nbsp;: toolchain installed directory(e.g. /opt/fsl-imx-x11/4.1.15-2.0.0)
+
=== '''Support List (Get BSP & image)''' ===
  
−
debug console / serial console
+
*[[IoTGateway/BSP/Linux/AM335x/OS_Support_List|<font color="#0066cc">OS Support List(base on ti-skd-am335x-evm-06.00.00.00 and ti-sdk-am335x-evm-02.00.00.00.00)</font>]]
 +
*[[OS_Support_List(based_on_Yocto_2.1)_am335x|<font color="#0066cc">OS Support List(based on Yocto 2.1)</font>]]
  
−
:serial terminal program (e.g. minicom, putty, teraterm ...) that serial port is configured to 115200 8N1
+
=== '''User Guide''' ===
  
−
terminal console
+
*[[IoTGateway/BSP/Linux/AM335x/AM335x_LBV6_User_Guide|<font color="#0066cc">Version 1 (based on ti-sdk-am335x-evm-06.00.00.00 ) User Guide</font>]]
 +
*[[IoTGateway/BSP/Linux/AM335x/AM335x_LBV2_User_Guide|<span class="mw-headline" id="version_1_.28based_on_ti-sdk-am335x-evm-06.00.00.00_.29"><font color="#0066cc">Version 2 (based on ti-sdk-am335x-evm-02.00.00.00.00 ) User Guide</font></span>]]
 +
*[http://ess-wiki.advantech.com.tw/view/IoTGateway/BSP/Linux/AM57xx/AM57xx_User_Guide <span class="mw-headline" id="version_1_.28based_on_ti-sdk-am335x-evm-06.00.00.00_.29"><font color="#0066cc">Version&nbsp;3 (based on Yocto 2.1) User Guide</font></span>]
 +
**[[Function_Test|Function Test]] 
 +
*[[Yocto_Linux_BSP_Ver.4_User_Guide_for_AM57xx/AM335x_series|<span class="mw-headline" id="version_1_.28based_on_ti-sdk-am335x-evm-06.00.00.00_.29"><font color="#0066cc">Version&nbsp;4 (based on Yocto 2.4) User Guide</font></span>]]
 +
**<font color="#0066cc">Function Test</font> 
  
−
:terminal program (e.g. gnome-terminal, xfce4-terminal ...)
+
=== '''FAQ''' ===
  
−
== <font color="#0070c0">Docker install and setting</font> ==
+
*[[IoTGateway/BSP/Linux/AM335x/FAQ|FAQ]]
  
−
<span style="font-size:larger;">'''<span style="color:#0070c0">If you don't have docker in your system, then you can follow the below &nbsp;steps to install docker and run it first.</span>'''</span>
+
= '''AM57xx''' =
  
−
=== <span style="color:#0070c0">To install Docker Engine on your platform</span> ===
+
=== '''OS Support list (Get BSP & Image)''' ===
  
−
:Please refer to [https://docs.docker.com/engine/installation/ Docker Installation Guide] for details
+
*[http://ess-wiki.advantech.com.tw/view/IoTGateway/BSP/Linux/AM57xx/OS_Support_List <font color="#0066cc">OS Support List(base on Yocto 2.1)</font>]  
  
−
=== <span style="color:#0070c0">To pull [https://hub.docker.com/r/advrisc/u12.04-imx6lbv3/ ubuntu 12.04 image from Docker Hub]&nbsp;</span> ===
+
=== '''User Guide''' ===
  
−
:<code>$ docker pull advrisc/u12.04-imx6lbv3</code><br/>
+
*[http://ess-wiki.advantech.com.tw/view/IoTGateway/BSP/Linux/AM57xx/AM57xx_User_Guide <font color="#0066cc">Version 1 (based on Yocto 2.1) User Guide</font>]
−
:<code>$ docker run --name imx6LBV8xxx&nbsp;&nbsp;-it advrisc/u12.04-imx6lbv3 /bin/bash</code><br/>
+
*[[Getting_Started|Function Test]]
  
−
=== To copy BSP from local filesystem to the container ===
+
= '''AM62xx''' =
  
−
:<code>$ docker cp '''${BSP_PACK}''' imx6LBV8xxx:/home/adv/&nbsp;</code>
+
=== '''OS Support list (Get Image)''' ===
  
−
=== <span style="color:#0070c0">To&nbsp;create&nbsp;container</span> ===
+
*[http://ess-wiki.advantech.com.tw/view/IoTGateway/BSP/Linux/AM62xx/OS_Support_List <font color="#0066cc">OS Support List(base on Yocto 3.1)</font>]
  
−
:<code>$ docker run --privileged -it --name '''${CONTAINER_NAME}'''&nbsp;-v '''${WORKSPACE}''':/home/adv/adv-release-bsp -v /dev:/dev&nbsp;advrisc/u12.04-imx6lbv3 /bin/bash</code><br/>
+
=== '''User Guide(Get SDK )''' ===
  
−
== <span style="color:#0070c0">Get BSP</span> ==
+
*[http://ess-wiki.advantech.com.tw/view/IoTGateway/BSP/Linux/AM62xx/AM62xx_User_Guide <font color="#0066cc">Version 1 (based on Yocto 3.1) User Guide</font>]
  
−
:You have two methods to put BSP into container created above
+
= '''RK3288''' =
  
−
=== <span style="color:#0070c0">Download BSP From GitHub</span> ===
+
=== '''OS Support list''' ===
  
−
:The following example shows how to download the Advantech Yocto BSP from GitHub.
+
*[[RK3288_OS_Support_List_(Base_On_Debian9)|OS Support List Debian9]]
 +
*[[OS_Support_List_Debian10|OS_Support_List_Debian10]]
  
−
:For this example, a directory called '''adv-release-bsp''' is created for the project.
+
=== '''User Guide''' ===
  
−
:Refer to&nbsp;[[IoTGateway/BSP/Linux/iMX7/OS_Support_List_new|IoTGateway/BSP/Linux/iMX7/OS Support List new]] , Official version "'''imx6LBV8xxx"&nbsp;'''is taken as&nbsp;an example&nbsp;:
+
*[[Linux_BSP_User_Guide_for_rk3288_series_Debian9|Linux BSP build and update images.&nbsp;]]
 +
*[[Environment_set_up.|Environment_set_up.]]
 +
*[[How_to_do.|How_to_do.]]
 +
*[http://ess-wiki.advantech.com.tw/view/RK3288_qt5Creator RK3288_qt5Creator]
 +
*[[Qt5Creator_toolchain_Qt_5.11.3|qt5Creator_toolchain_Qt_5.11.3]]
 +
*[[How_to_flash_the_Debian_image_into_RSB-4680|How_to_flash_the_Debian_image_into_RSB-4680]]  
  
−
$ git config --global user.name "Your Name"
+
=== '''FQA''' ===
−
$ git config --global user.email you@example.com
 
−
$ mkdir adv-release-bsp
 
−
$ sudo chown adv:adv adv-release-bsp
 
−
$ cd adv-release-bsp
 
−
$ repo init -u [git://github.com/ADVANTECH-Corp/adv-arm-yocto-bsp.git git://github.com/ADVANTECH-Corp/adv-arm-yocto-bsp.git] -b '''refs/tags/imx6LBV8xxx''' -m '''imx6LBV8xxx'''.xml
 
−
$ repo sync
 
  
−
:If you want to get latest bsp
+
= '''RK3399''' =
  
−
$ repo init -u [git://github.com/ADVANTECH-Corp/adv-arm-yocto-bsp.git git://github.com/ADVANTECH-Corp/adv-arm-yocto-bsp.git] -b imx-4.1-krogoth
+
=== '''OS Support List''' ===
−
$ repo sync
 
  
−
=== <span style="color:#0070c0">Copy BSP tarball to Container</span> ===
+
*[[RISC_series_(RSB-3710/RSB-4710/ROM-5780)_Debian9|RISC_series_(RSB-3710/RSB-4710/ROM-5780)_Debian9]]&nbsp;
 +
*[[RISC_series_(RSB-3710/RSB-4710/ROM-5780)_Debian10|RISC_series_(RSB-3710/RSB-4710/ROM-5780)_Debian10]]&nbsp;
 +
*[http://ess-wiki.advantech.com.tw/view/IoTGateway/BSP/Linux/RK3399/OS_Support_List DS series (DS-100/DS-100Lite/EIS-D620) Debian9]
  
−
:If you have BSP tarball (eg. imx6LBV8xxx_2018-xx-xx.tgz), then you have to copy it into container.
+
=== '''User Guide''' ===
  
−
Follow the steps below:
+
RISC&nbsp;series(RSB-3710/RSB-4710/ROM-5780)
  
−
1.Exit container and back to local machine
+
*[http://ess-wiki.advantech.com.tw/view/Debian_BSP_User_Guide_for_rk3399_series_risc(RSB4710). Linux BSP User Guide for rk3399 series Debian9/Debian10]
 +
*[http://ess-wiki.advantech.com.tw/view/Getting_Start_(RSB4710). Getting Start]
 +
*[http://ess-wiki.advantech.com.tw/view/MAC_Address MAC_Address]
 +
*[http://ess-wiki.advantech.com.tw/view/Qt5Creator <font color="#0066cc">Qt5Creator</font>]
 +
*[[Qt5Creator_toolchain_Qt_5.11.3|<font color="#0066cc">Qt5Creator_toolchain_Qt_5.11.3</font>]]
  
−
$ exit
+
DS-100&nbsp;
  
−
2.Copy BSP tarball to ${WORKSPACE} , and change owner
+
*[[IoTGateway/BSP/Linux/Linux_BSP_User_Guide_Debian9_for_rk|Linux BSP User Guide for rk3399 series Debian9]]
 +
*[[IoTGateway/BSP/Linux/Linux_BSP_User_Guide_DeviceOn|Linux BSP User Guide for rk3399 series DeviceOn]]
 +
*[[IoTGateway/BSP/Linux/Linux_BSP_User_Guide_SGI|Linux BSP User Guide for SGI [DMS-SA53]]]
  
−
$ cp imx6LBV8xxx_2018-xx-xx.tgz '''${WORKSPACE}'''
+
=== '''FQA''' ===
−
$ sudo chown adv:adv ${WORKSPACE}/imx6LBV8xxx_2018-xx-xx.tgz&nbsp;
 
  
−
3.Back to container
+
= '''RK3568''' =
  
−
$ docker start '''${CONTAINER_NAME}'''
+
=== '''OS Support List''' ===
−
$ docker attach '''${CONTAINER_NAME}'''
 
  
−
4.Unpack BSP tarball
+
[[RISC_series_RK3568_Linux|RISC_series (RSB-4810) Debian10]]
  
−
$ tar zxvf imx6LBV8xxx_2018-xx-xx.tgz
+
=== '''User Guide''' ===
  
−
== <span style="color:#0070c0">Downloads tarball</span> ==
+
RISC&nbsp;series(RSB-4810 ROM-5880 AFE-E630)
  
−
:Not necessarily step
+
*[[Linux_BSP_User_Guide_for_rk3568_series_Debian10|Linux_BSP_User_Guide_for_rk3568_series_Debian10]]
 +
*[[Linux_BSP_User_Guide_for_rk3568_series_Debian11|Linux_BSP_User_Guide_for_rk3568_series_Debian11]]
 +
*[[Getting_Start_RK3568|Getting Start]]
 +
*MAC_Address
 +
*Qt5Creator
 +
*Qt5Creator_toolchain_Qt_5.11.3
  
−
:During building &nbsp;Yocto image , it will generate downloads folder which includes all packages we need , but it usually can't fetch normally, so we keep this downloads folder. Then we can reduce some fetch failed issue.
+
&nbsp;
  
−
:You can get Downloads tarball (downloads-2.1.tar.gz) from following URL:
+
= '''RK3588''' =
  
−
:<code>[https://pan.baidu.com/s/1nvqgx2T#list/path=/ELAA/imx6_yocto_bsp_2.1_2.0.0/downloads&parentPath=/ELAA https://pan.baidu.com/s/1nvqgx2T#list/path=%2FELAA%2Fimx6_yocto_bsp_2.1_2.0.0%2Fdownloads&parentPath=%2FELAA]</code>
+
=== '''OS Support List''' ===
  
−
:If you get downloads tarball, you can copy to your '''${WORKSPACE}'''
+
[[RISC_series_RK3588_Linux|RISC_series (ROM-6881) Debian11]]
  
−
Follow the steps below:
 
  
−
1.Exit container and back to local machine
+
=== '''User Guide''' ===
  
−
$ exit
+
RISC&nbsp;series(ROM-6881)
  
−
2.Copy Downloads tarball to ${WORKSPACE} , and change owner
+
*[[Linux_BSP_User_Guide_for_rk3588_series_Debian11|Linux_BSP_User_Guide_for_rk3588_series_Debian11]]
 +
*[[Getting_Start_RK3588|Getting Start]]
 +
*[[RK3588/Linux/Main_Manual|Manual (Building...)]]
 +
*MAC_Address
 +
*Qt5Creator
 +
*Qt5Creator_toolchain_Qt_5.11.3
  
−
$ cp downloads-2.1.tar.gz '''${WORKSPACE}'''
+
&nbsp;
−
$ sudo chown adv:adv ${WORKSPACE}/downloads-2.1.tar.gz&nbsp;
 
  
−
3.Back to container
+
= '''RK_ALL''' =
  
−
$ docker start '''${CONTAINER_NAME}'''
+
=== '''User Guide''' ===
−
$ docker attach '''${CONTAINER_NAME}'''
 
  
−
4.Unpack Downloads tarball
+
All rockchip platforms (RK3288、RK3399、RK3568、RK3588 etc) have similar funtions.
  
−
$ tar zxvf downloads-2.1.tar.gz
+
Here are the summary FAQs&nbsp;:&nbsp;
  
−
5.make link to downloads folder
+
*[[RK_PLatform_Quick_Start|Quick Start]]
 +
*[[RK_ALL_Qt_Toolchain|QT ToolChain]]
 +
*[[RK_ALL_NPU|NPU]]
 +
*[[RK_ALL_RF_Test|RF Test]]
  
−
$ cd adv-release-bsp
+
= '''nVidia''' =
−
$ ln -s ${WORKSPACE}/downloads_2.1 downloads
 
  
−
== <span style="color:#0070c0">Introducing BSP</span> ==
+
=== '''OS Support List''' ===
  
−
:The BSP is based on Yocto Project with Freescale enhanced features for i.MX6, plus specific target board features from Advantech Inc..
+
*[[IoTGateway/BSP/Linux/nVidia_Jetson_OS_Support_List|nVidia Jetson OS Support List]]
−
:The Advantech Yocto Project BSP Release directory contains a "sources" directory, which contains the recipes used to build,
 
  
−
one or more build directories, and a set of scripts used to set up the environment.
+
=== '''User Guide''' ===
  
−
:The recipes used to build the project come from both the community and Advantech. The Yocto Project layers are downloaded
+
*[[Linux_BSP_User_Guide_for_jetson_series|Linux BSP build for jetson series]]
  
−
to the sources directory. This sets up the recipes that are used to build the project.
+
=== '''Jetbot''' ===
  
−
=== <span style="color:#0070c0">Naming Rule</span> ===
+
*[[Jetbot_ROS|Jetbot ROS]]
  
−
:The tarball/prebuilt image name is consist of the model name followed by "LB" or "LI" plus version number and released date.
+
=== '''Jetson AI''' ===
  
−
:For example, '''BSP file name: imx6LBV8040_2017-01-16.tgz'''<br/>
+
*[[Deploying_Deep_Learning|Deploying Deep Learning]]
−
:which , "LB" is acronym of <span style="color:#ff0000">'''L'''</span>inux <span style="color:#ff0000">'''B'''</span>SP,<br/>
 
−
:&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;"V8040" stands for <span style="color:#ff0000">'''V'''</span>ersion <font color="#ff0000">'''8'''</font>.<span style="color:#ff0000">'''040'''</span><nowiki>.</nowiki>
 
  
 +
=== '''DevcieOn''' ===
  
 +
*[[DeviceOn|DevinOn]]
  
 +
=== '''FQA''' ===
  
 +
= '''LS1046''' =
  
 +
=== '''OS Support List''' ===
  
 +
*[[OS_Support_List_(based_on_Ubutu_18.04)|OS Support List (based on Ubuntu 18.04)]]
  
 +
=== '''User Guide''' ===
  
 +
*[[Linux_BSP_build_User_Guide_(LSDK20.12)|Linux BSP build User Guide (LSDK20.12)]]
 +
*[[Security_fuse_processor_(SFP)|Security fuse processor (SFP)]]
 +
*[[LS1046A_-_Data_Path_Acceleration_Architecture_(DPAA)|Data Path Acceleration Architecture (DPAA)]]
  
 +
=== '''Product&nbsp;''' ===
  
−
:For example, '''Yocto image name: 7421A1LIV8040_DualPlus_2017-01-16.img.gz'''<br/>
+
'''NXP LS1046A Cortex®-A72 COM Express Type 7 Computer-on-Module&nbsp;'''
−
:which "7421A1" stands for <span style="color:#ff0000">'''ROM-7421 A1'''</span><br/>
 
−
:&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; "LI" is acronym for prebuilt <span style="color:#ff0000">'''L'''</span>inux <span style="color:#ff0000">'''I'''</span>mage,<br/>
 
−
:&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; "DualPlus" means this image is fit for Dual Plus Core/Quad Plus Core.
 
  
−
:For example, '''Yocto image name: 3420A1LIV8050_DualQuad_2017-01-17.img.gz'''<br/>
+
*[http://ess-wiki.advantech.com.tw/view/ROM-8720_user_guide ROM-8720 user guide]
−
:which "3420A1" stands for <span style="color:#ff0000">'''ROM-3420 A1'''</span><br/>
 
−
:&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; "LI" is acronym for prebuilt <span style="color:#ff0000">'''L'''</span>inux <span style="color:#ff0000">'''I'''</span>mage,<br/>
 
−
:&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; "DualQuad" means this image is fit for Dual Core/Quad Core.
 
  
−
:For example, '''Yocto image name: U220A1LIV8080_DualLiteSolo_2017-02-08.img.gz'''<br/>
+
=== '''FAQ''' ===
−
:which "U220A1" stands for <span style="color:#ff0000">'''UBC-220 A1'''</span><br/>
 
−
:&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; "LI" is acronym for prebuilt <span style="color:#ff0000">'''L'''</span>inux <span style="color:#ff0000">'''I'''</span>mage,<br/>
 
−
:&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; "DualLiteSolo" means this image is fit for Dual Lite Core/Solo Core.
 
  
−
=== <span style="color:#0070c0">BSP Content</span> ===
+
= '''Phytium''' =
−
<div style="margin-left:0.499cm; margin-right:0cm">The description of some important folders list below:</div><div style="margin-left:1.499cm; margin-right:0cm">'''sources/'''</div><div style="margin-left:1.998cm; margin-right:0cm">'''meta-advantech/'''&nbsp;: meta layer by Advantech</div><div style="margin-left:1.998cm; margin-right:0cm">'''meta-fsl-*/'''&nbsp;: meta layer by Freescale</div><div style="margin-left:1.499cm; margin-right:0cm">'''fsl-setup-release.sh'''&nbsp;: to create one new build environment</div><div style="margin-left:1.499cm; margin-right:0cm">'''setup-environment'''&nbsp;: to continue an exist build environment</div>
 
−
== <span style="color:#0070c0">Build Instructions</span> ==
 
  
−
=== <span style="color:#0070c0">To create one new build environment</span> ===
+
=== '''Kylin OS''' ===
 +
*[[Phytium_Kylin_Qt_Toolchain|QT ToolChain]]
  
−
:Perform the following commands in terminal console
 
−
::<code>$ cd <span style="color:#7030a0">'''${BSP_HOME}'''</span></code>
 
−
::<code>$ MACHINE=<span style="color:#7030a0">'''${MC}'''</span> source fsl-setup-release.sh -b <span style="color:#7030a0">'''${BDIR}'''</span> -e x11</code>
 
−
:You need to read and accept the EULA.
 
−
:[[File:Accept EULA.png|RTENOTITLE]]
 
  
−
=== <span style="color:#0070c0">To continue an exist build environment</span> ===
+
= '''ELAA''' =
  
−
:Perform the following commands in terminal console
+
*[[IoTGateway/BSP/Linux/ELAA/Document|Document]]
−
::<code>$ cd <span style="color:#7030a0">'''${BSP_HOME}'''</span></code>
+
*[http://forum.elaa-platform.org/ ELAA Developer Forum]
−
::<code>$ source setup-environment <span style="color:#7030a0">'''${BDIR}'''</span></code>
 
  
−
=== <span style="color:#0070c0">To build sdcard image</span> ===
+
== Add on value ==
−
 
 
−
:To create/continue a build environment
 
−
:Perform the following command in terminal console
 
−
::<code>$ bitbake fsl-image-qt5</code>
 
−
:The file, fsl-image-qt5-<span style="color:#7030a0">'''${MC}'''</span>.sdcard, will be located in directory, ./tmp/deploy/images/<span style="color:#7030a0">'''${MC}'''</span>, while building process finished successfully.
 
−
 
 
−
=== <span style="color:#0070c0">To build toolchain installer</span> ===
 
−
 
 
−
:To create/continue a build environment
 
−
:Perform the following command in terminal console
 
−
::<code>$ bitbake meta-toolchain-qt5</code><br/>
 
−
:The below installer will be located in the directory "./tmp/deploy/sdk".
 
−
::<tt>fsl-imx-x11-glibc-x86_64-meta-toolchain-qt5-cortexa9hf-vfp-neon-toolchain-<span style="color:#7030a0">'''${KERNEL}'''</span>-1.1.0.sh</tt><br/>
 
−
 
 
−
=== <span style="color:#0070c0">To build u-boot</span> ===
 
−
 
 
−
:To create/continue a build environment
 
−
:Perform the following command in terminal console
 
−
::<code>$ bitbake u-boot-imx</code>
 
−
:The two files, u-boot_crc.bin & u-boot_crc.bin.crc, will be located in the directory, ./tmp/deploy/images/<span style="color:#7030a0">'''${MC}'''</span>.
 
−
 
 
−
=== <span style="color:#0070c0">To modify source code and rebuild u-boot</span> ===
 
−
 
 
−
:To create/continue a build environment
 
−
:Perform the following command in terminal console
 
−
::to modify source code and created a patch file
 
−
:::<code>$ git diff > test.patch</code>
 
−
::to create "u-boot-imx" directory and copy the "test.patch" file in following path
 
−
:::<code>sources/meta-advantech/meta-fsl-imx6/recipes-bsp/u-boot$</code>
 
−
::to open "u-boot-imx_2016.03.bbappend" file in following path
 
−
:::<code>sources/meta-advantech/meta-fsl-imx6/recipes-kernel$vi u-boot-imx_2016.03.bbappend</code>
 
−
:::<code>FILESEXTRAPATHS_prepend&nbsp;:= "${THISDIR}/${PN}:"</code>
 
−
:::<code>SRCBRANCH = "imx_v2016.03_4.1.15_2.0.0_ga"</code>
 
−
:::<code>UBOOT_SRC = "..."</code>
 
−
:::<code>SRCREV = "${AUTOREV}"</code>
 
−
::to add path information of patch file to u-boot-imx_2016.03.bbappend file
 
−
:::<code>SRC_URI += "file://test.patch</code>
 
−
::to clean u-boot image and code if you modify content of "mx6*.defconfig" file or "Makefile" file in the patch file
 
−
:::<code>$ bitbake u-boot-imx -c cleansstate</code>
 
−
::to build u-boot image
 
−
:::<code>$ bitbake u-boot-imx</code>
 
−
 
 
−
=== <span style="color:#0070c0">To build linux kernel</span> ===
 
−
 
 
−
:To create/continue a build environment
 
−
:If you operate on docker images, please install tmux application before running this command
 
−
:::<code>$ sudo apt-get install tmux</code>
 
−
:Type following command to enter tmux
 
−
:::<code>$ tmux</code>
 
−
:Perform the following command in terminal console to show up menuconfig
 
−
:::<code>$ bitbake linux-imx -c menuconfig</code>
 
−
:After edit menuconfig, type following command to exit tmux windows
 
−
:::<code>$ exit</code>
 
−
:to build kernel image
 
−
:::<code>$ bitbake linux-imx</code>
 
−
:The two files, zImage & zImage-<span style="color:#7030a0">'''${IMX6PROC}'''</span>-<span style="color:#7030a0">'''${BOARD}'''</span>-<span style="color:#7030a0">'''${BOARD'''</span>'''<span style="color:#7030a0">_REV</span><span style="color:#7030a0">}</span>'''.dtb, will be located in the directory, ./tmp/deploy/images/<span style="color:#7030a0">'''${MC}'''</span>.
 
−
 
 
−
=== <span style="color:#0070c0">To modify source code and rebuild linux kernel</span> ===
 
−
 
 
−
:To create/continue a build environment
 
−
:Perform the following command in terminal console
 
−
::to modify source code and created a patch file
 
−
:::<code>$ git diff > test.patch</code>
 
−
::to create "linux-imx" directory and copy the "test.patch" file in following path&nbsp;
 
−
:::<code>sources/meta-advantech/meta-fsl-imx6/recipes-kernel/linux/linux-imx$</code>
 
−
::to open "linux-imx_4.1.15.bbappend" file in following path&nbsp; (<code><span style="color:#FF0000;">linux-imx</span>_4.1.15.bbappend will check&nbsp;<span style="color:#FF0000;">linux-imx</span> folder&nbsp;&nbsp;</code>)
 
−
:::<code>sources/meta-advantech/meta-fsl-imx6/recipes-kernel/linux/$vi linux-imx_4.1.15.bbappend</code>
 
−
:::<code>FILESEXTRAPATHS_prepend&nbsp;:= "${THISDIR}/${PN}:"</code>
 
−
:::<code>SRCBRANCH = "imx_4.1.15_2.0.0_ga"</code>
 
−
:::<code>KERNEL_SRC = "..."</code>
 
−
:::<code>SRCREV = "${AUTOREV}"</code>
 
−
::to add path information of patch file to linux-imx_4.1.15.bbappend file
 
−
:::<span style="color:#FF0000;"><code>SRC_URI += "file://test.patch</code></span>
 
−
::to clean kernel image and code if you modify content of "imx_v7_adv_defconfig" file or "Makefile" file in the patch file
 
−
:::<code>$ bitbake linux-imx -c cleansstate</code>
 
−
::to build kernel image
 
−
:::<code>$ bitbake linux-imx</code>
 
−
 
 
−
== <span style="color:#0070c0">Creating boot-up on-board flash from prebuilt image</span> ==
 
−
 
 
−
=== <span style="color:#0070c0">To create one boot-up SD card</span> ===
 
−
 
 
−
:Perform the following command in terminal console
 
−
::<code>$ gunzip -c '''<span style="color:#7030a0">${PREBUILT_IMAGE</span>''' | dd of=<span style="color:#7030a0">'''${SD_DEVICE}'''</span> bs=1M</code>
 
−
::<code># sync</code>
 
−
 
 
−
=== <span style="color:#0070c0">To transfer whole system to on-board flash</span> ===
 
−
 
 
−
:Boot up from SD card
 
−
:Perform the following commands in debug console
 
−
::<code># cd /mk_inand</code>
 
−
::<code># ./mksd-linux.sh /dev/mmcblk0</code>
 
−
:press y followed by Enter, if following message shows up:
 
−
::[[File:All data will be destroyed.png|RTENOTITLE]]
 
−
:While "[Done]" shows up means the transferring is finished.
 
−
 
 
−
== <span style="color:#0070c0">Creating boot-up on-board flash from built sdcard image</span> ==
 
−
 
 
−
=== <span style="color:#0070c0">To create one boot-up SD card</span> ===
 
−
 
 
−
:Perform the following commands in terminal console
 
−
::<code>$ pushd <span style="color:#7030a0">'''${BSP_HOME}'''</span>/<span style="color:#7030a0">'''${BDIR}'''</span>/tmp/deploy/images/<span style="color:#7030a0">'''${MC}'''</span></code>
 
−
::<code>$ dd if=<span style="color:#7030a0">'''${SDCARD_IMAGE}'''</span> of=<span style="color:#7030a0">'''${SD_DEVICE}'''</span> bs=1M</code>
 
−
::<code>$ sync</code>
 
−
::<code>$ popd</code>
 
−
 
 
−
=== <span style="color:#0070c0">To transfer whole system to on-board flash</span> ===
 
−
 
 
−
:Boot up from SD card
 
−
:Insert USB stick that contains <span style="color:#7030a0">'''${SDCARD_IMAGE}'''</span>, USB stick will be auto mounted to /run/media/sda1.
 
−
:Perform the following commands in debug console
 
−
::<code># umount /dev/mmcblk0p?</code>
 
−
::<code># cd /run/media/sda1</code>
 
−
::<code># dd if=<span style="color:#7030a0">'''${SDCARD_IMAGE}'''</span> of=/dev/mmcblk0 bs=4M conv=fsync</code>
 
−
::<code># P2START=$(fdisk -lu | grep mmcblk0p2 | awk '{print $2}')</code>
 
−
::<code># echo -e "d\n2\nn\np\n2\n<span style="color:#7030a0">'''${P2START}'''</span>\n\nw\n" | fdisk -u /dev/mmcblk0</code>
 
−
::<code># umount /dev/mmcblk0p2</code>
 
−
::<code># e2fsck -f -y /dev/mmcblk0p2</code>
 
−
::<code># resize2fs /dev/mmcblk0p2</code>
 
−
::<code># poweroff</code>
 
−
 
 
−
== <span style="color:#0070c0">Debug console information</span> ==
 
−
 
 
−
If you want to see debug message from device, you need to prepare for hardware device and software tool.
 
−
 
 
−
=== <span style="color:#0070c0">Preparing for hardware device</span> ===
 
−
 
 
−
*The following URL provides information about the debug port slot and the debug port line for each device
 
−
 
 
−
[[Debug_Port_Information#i.MX6|Debug Port Information]]
 
−
 
 
−
=== <span style="color:#0070c0">Preparing for software tool</span> ===
 
−
 
 
−
*You need to prepare the debug console tool. For example: "minicom" tool or "putty" tool.
 
−
*Baud rate: 115200
 
−
 
 
−
= Customization =
 
−
 
 
−
== <span style="color:#0070c0">Package addition</span> ==
 
−
 
 
−
=== <span style="color:#0070c0">To add tcf-agent & openssh-sftp-server</span> ===
 
−
 
 
−
:Navigate to the directory where fsl-image-adv.inc located
 
−
::<code>$ cd <span style="color:#7030a0">'''${BSP_HOME}'''</span>/sources/meta-advantech/recipes-fsl/images</code>
 
−
:Add following line to fsl-image-adv.inc
 
−
::<code>IMAGE_INSTALL += " tcf-agent openssh-sftp-server "</code>
 
−
:[[IoTGateway/BSP/Linux/iMX6/Yocto_LBV5_User_Guide#To_continue_an_exist_build_environment|Continue an exist build environment]] and [[IoTGateway/BSP/Linux/iMX6/Yocto_LBV5_User_Guide#To_build_sdcard_image|build sdcard image]]
 
−
 
 
−
=== <span style="color:#0070c0">To add chromium browser</span> ===
 
−
 
 
−
:Navigate to the directory where local.conf located
 
−
::<code>$ cd <span style="color:#7030a0">'''${BSP_HOME}'''</span>/<span style="color:#7030a0">'''${BDIR'''</span>'''<span style="color:#7030a0">}</span>'''/conf</code>
 
−
:Add following two lines to local.conf
 
−
::<code>CORE_IMAGE_EXTRA_INSTALL += "chromium"</code>
 
−
::<code>LICENSE_FLAGS_WHITELIST="commercial"</code>
 
−
:[[#To_continue_an_exist_build_environment|Continue an exist build environment]] and [[#To_build_sdcard_image|build sdcard image]]
 
−
 
 
−
== <span style="color:#0070c0">Setting up SDK</span> ==
 
−
 
 
−
:Please follow the section,[[IoTGateway/BSP/Linux/iMX6/Yocto_LBV5_User_Guide#To_build_toolchain_installer|<span style="color:#FF0000;">To build toolchain installer</span>]], to build one toolchain installer
 
−
:Perform the following command in terminal console
 
−
::<code>$ cd <span style="color:#7030a0">'''${BSP_HOME}'''</span>/<span style="color:#7030a0">'''${BDIR}'''</span>/tmp/deploy/sdk</code>
 
−
::<code>$ sudo ./fsl-imx-x11-glibc-x86_64-meta-toolchain-qt5-cortexa9hf-vfp-neon-toolchain-<span style="color:#7030a0">'''${KERNEL}'''</span>-1.1.0.sh</code><br/>
 
−
:Enter new installed directory or just press <code>Enter</code> to use default directory.
 
−
:While <code>Proceed[y/n]?</code> shows up, please enter the correct one.
 
−
:Waiting for the SDK installed (while the following messages show up completely)
 
−
::[[File:Setting up sdk 3.png|RTENOTITLE]]
 
−
 
 
−
== <span style="color:#0070c0">Setting up cross compiling environment</span> ==
 
−
 
 
−
:SDK has been set up (ref.[[#Setting_up_SDK|<span style="color:#FF0000;">Setting up SDK</span>]])
 
−
:Perform the following command in terminal console
 
−
::<code>$ source <span style="color:#7030a0">'''${TOOLCHAIN}'''</span>/environment-setup-cortexa9hf-vfp-neon-poky-linux-gnueabi</code>
 
−
 
 
−
== <span style="color:#0070c0">Building & updating u-boot manually</span> ==
 
−
 
 
−
:The cross compiling environment has been set up. (ref. [[#Setting_up_cross_compiling_environment|Setting up cross compiling environment]])
 
−
 
 
−
=== <span style="color:#0070c0">Copy BSP tarball to Container</span> ===
 
−
 
 
−
Refer to [http://ess-wiki.advantech.com.tw/view/IoTGateway/BSP/Linux/iMX6/Yocto_LBV8_User_Guide#Copy_BSP_tarball_to_Container <span style="color:#FF0000;">Copy_BSP_tarball_to_Container</span>] , copy u-boot tarball to ${WORKSPACE} and back to container change owner & unpack tarball
 
−
 
 
−
$ sudo chown adv:adv imx6LBV8210_2017-02-20_uboot-imx6.tgz
 
−
$ tar zxvf imx6LBV8210_2017-02-20_uboot-imx6.tgz
 
−
 
 
−
=== <span style="color:#0070c0">Config u-boot</span> ===
 
−
 
 
−
$make '''${MX6PROC}${BOARD}${BOARD_REV}'''_'''${MEM_SIZE}'''_defconfig
 
−
 
 
−
eg.
 
−
 
 
−
$make mx6qrsb4411a1_1G_defconfig
 
−
 
 
−
=== <span style="color:#0070c0">Build u-boot</span> ===
 
−
 
 
−
$make -j4
 
−
 
 
−
=== <span style="color:#0070c0">Replace u-boot</span> ===
 
−
 
 
−
:Perform the following command to transfer to exist boot-up SD card
 
−
 
 
−
$ dd if=u-boot_crc.bin.crc of='''${SD_DEVICE}''' bs=512 seek=2 conv=fsync
 
−
$ dd if=u-boot_crc.bin of='''${SD_DEVICE}''' bs=512 seek=3 conv=fsync
 
−
 
 
−
:Perform the following command to transfer to on-board flash
 
−
 
 
−
$ dd if=u-boot_crc.bin.crc of=/dev/mmcblk0 bs=512 seek=2 conv=fsync
 
−
$ dd if=u-boot-crc.bin of=/dev/mmcblk0 bs=512 seek=3 conv=fsync
 
−
 
 
−
== <span style="color:#0070c0">Building & updating kernel/modules/dtb manually</span> ==
 
−
 
 
−
:The cross compiling environment has been set up. (ref. [[#Setting_up_cross_compiling_environment|Setting up cross compiling environment]])
 
−
 
 
−
=== <span style="color:#0070c0">Copy BSP tarball to Container</span> ===
 
−
 
 
−
Refer to [http://ess-wiki.advantech.com.tw/view/IoTGateway/BSP/Linux/iMX6/Yocto_LBV8_User_Guide#Copy_BSP_tarball_to_Container Copy_BSP_tarball_to_Container] , <span style="color:#FF0000;">copy kernel tarball </span>to ${WORKSPACE} and back to container
 
−
 
 
−
change owner & unpack tarball
 
−
 
 
−
$ sudo chown adv:adv imx6LBV8210_2017-02-20_linux-imx6.tgz
 
−
$ tar zxvf imx6LBV8210_2017-02-20_linux-imx6.tgz
 
−
 
 
−
=== <span style="color:#0070c0">Config kernel</span> ===
 
−
 
 
−
:Configure linux kernel
 
−
 
 
−
$cd linux-imx6
 
−
$make distclean
 
−
$make imx_v7_adv_defconfig
 
−
$make menuconfig
 
−
 
 
−
If you get error ,when you "make imx_v7_adv_defconfig" , you need to insatall "libncurses*"
 
−
 
 
−
$apt-get install libncurses*
 
−
 
 
−
[[File:Error.JPG|imx_v7_adv_defconfig_error]]
 
−
 
 
−
=== <span style="color:#0070c0">Build kernel</span> ===
 
−
 
 
−
:Start building linux kernel
 
−
 
 
−
$ make -j4 zImage
 
−
 
 
−
:The kernel image file, zImage, is located in the directory "./arch/arm/boot/".
 
−
 
 
−
:Start building kernel modules
 
−
 
 
−
$ make -j4 modules
 
−
 
 
−
:Copy all modules to a temporary rootfs directory, "~/temp/rootfs"
 
−
 
 
−
$ make modules_install INSTALL_MOD_PATH=~/temp/rootfs
 
−
 
 
−
:Building device tree blob
 
−
 
 
−
$ make -j4 <span style="color:#7030a0">'''${IMX6PROC}'''</span>-<span style="color:#7030a0">'''${BOARD}'''</span>-<span style="color:#7030a0">'''${BOARD_REV}'''</span>.dtb
 
−
 
 
−
:The device tree blob, <span style="color:#7030a0">'''${IMX6PROC}'''</span>-<span style="color:#7030a0">'''${BOARD}'''</span>-<span style="color:#7030a0">'''${BOARD_REV}'''</span>.dtb, is located in the directory "./arch/arm/boot/dts/".
 
−
 
 
−
=== <span style="color:#0070c0">Replace kernel & dts</span> ===
 
−
 
 
−
:Replace kernel
 
−
::copy zImage to SDcard or emmc
 
−
:Replace dtb file
 
−
::copy dtb file to SDcard or emmc
 
−
 
 
−
== <span style="color:#0070c0">Improve boot speed</span> ==
 
−
 
 
−
*Bootloader
 
−
 
 
−
1.bootdelay time
 
−
 
 
−
:We can cancel the bootdelay time by setting bootloader environment value.
 
−
 
 
−
setenv bootdelay 0
 
−
env save
 
−
reset
 
−
 
 
−
2.Disable console
 
−
 
 
−
:Disable debug message output can also improve boot speed
 
−
 
 
−
Disable kernel message
 
−
 
 
−
setenv mmcargs setenv bootargs console=${console},${baudrate} ${smp} root=${mmcroot} ${bootargs} '''quiet'''
 
−
env save
 
−
reset
 
−
 
 
−
Or
 
−
 
 
−
:Disable debug port
 
−
 
 
−
setenv console
 
−
env save
 
−
reset
 
−
 
 
−
*Rootfs
 
−
 
 
−
1.Use smaller rootfs
 
−
 
 
−
:We can speed up boot times by using a smaller rootfs instead of fsl-image-qt5 image
 
−
 
 
−
eg. core-image-full-cmdline, core-image-minimal
 
−
 
 
−
bitbake core-image-full-cmdline
 
−
 
 
−
It's a console-only image with more full-featured Linux system functionality installed.
 
−
 
 
−
And replace the original fsl-image-qt5 rootfs.
 
−
 
 
−
*Services
 
−
 
 
−
1. Using '''update-rc.d''' remove ,we can remove unnecessary services.
 
−
 
 
−
update-rc.d -f ＜basename＞ remove
 
−
 
 
−
= System Recovery =
 
−
 
 
−
Please refer to [[#Creating_boot-up_on-board_flash_from_prebuilt_image|Creating boot-up on-board flash from prebuilt image]] / [[#Creating_boot-up_on-board_flash_from_built_sdcard_image|sdcard image]] to create a boot-up SD card and transfer whole system to on-board flash.
 
−
 
 
−
= Package List =
 
−
 
 
−
'''In BSP''', list all packages which will be built in the image
 
−
 
 
−
bitbake -g '''fsl-image-qt5''' && cat pn-depends.dot | grep -v -e '-native' | grep -v digraph | grep -v -e '-image' \
 
−
| awk '{print $1}' | sort | uniq
 
−
 
 
−
File:[[:File:BSP_package1.docx|Package List]]
 
−
 
 
−
Show all recipes (include non-installed packages)
 
−
 
 
−
bitbake -s
 
−
 
 
−
File:[[:File:BSP_package2.docx|Package Version List]]
 
−
 
 
−
You can also check <span style="color:purple">'''${BDIR}'''</span>/tmp/deploy/images/<span style="color:purple">'''${MC}'''</span>/fsl-image-qt5-<span style="color:purple">'''${MC}'''</span>.manifest
 
−
 
 
−
It will show the same content with checking by rpm tool on target board.
 
−
 
 
−
'''On target board''', list all packages by rpm tool
 
−
 
 
−
rpm -qa --root / --dbpath /var/lib/rpm | sort
 
−
 
 
−
File:[[:File:Onboard_package.docx|Package List]]
 
−
 
 
−
== Quark ==
 
−
 
 
−
=== [[IoTGateway/BSP/Linux/Quark/OS_Support_List|OS Support List]] ===
 
−
 
 
−
=== [[IoTGateway/BSP/Linux/Quark/Yocto_LBV1_User_Guide|Version 1 User Guide]] ===
 
−
 
 
−
:This version is based on Intel Quark BSP v1.0.4 (Yocto 1.4.2).
 
−
 
 
−
=== [[IoTGateway/BSP/Linux/Quark/Yocto_LBV2_User_Guide|Version 2 User Guide]] ===
 
−
 
 
−
:This version is based on Intel Quark BSP v1.2.0 (Yocto 1.7.2).
 
−
 
 
−
*[[IoTGateway/BSP/Linux/Quark/Bluetooth_Testing_Guide|Bluetooth Testing Guide]]
 
−
*[[IoTGateway/BSP/Linux/Quark/Getting_BSP_from_GitHub|Getting the BSP from GitHub]]
 
−
 
 
−
::There is a [[IoTGateway/BSP/Linux/Quark/Getting_BSP_from_GitHub#Supported_version|newer version]] which is based on Intel Quark BSP v1.2.1.1 (Yocto 1.7.2).
 
−
 
 
−
*[[IoTGateway/BSP/Linux/Quark/BuildingDebianJessieRootfs|Building Debian (Jessie) Rootfs for Quark]]
 
−
 
 
−
=== [[IoTGateway/BSP/Linux/Quark/FAQ|FAQ]] ===
 
−
 
 
−
== APQ8016 ==
 
−
 
 
−
=== [[IoTGateway/BSP/Linux/APQ8016/OS_Support_List|OS Support List]] ===
 
−
 
 
−
=== Linux BSP User Guide ===
 
−
 
 
−
*[[IoTGateway/BSP/Linux/APQ8016/BSP_User_Guide_V1|Version 1 (Yocto 2.1 & Debian 9)]]
 
−
 
 
−
=== [[IoTGateway/BSP/Linux/APQ8016/FAQ|FAQ]] ===
 
−
 
 
−
== AM335x ==
 
−
 
 
−
=== OS Support List ===
 
−
 
 
−
*[http://ess-wiki.advantech.com.tw/view/IoTGateway/BSP/Linux/AM335x/OS_Support_List OS Support List(base on ti-skd-am335x-evm-06.00.00.00 and ti-sdk-am335x-evm-02.00.00.00.00 and&nbsp;Yocto 2.1)]
 
−
 
 
−
=== [[OS_Support_List(based_on_Yocto_2.1)_am335x|<font color="#0066cc">OS Support List(based on Yocto 2.1)</font>]] ===
 
−
 
 
−
=== [[IoTGateway/BSP/Linux/AM335x/AM335x_LBV6_User_Guide|<font color="#0066cc">Version 1 (based on ti-sdk-am335x-evm-06.00.00.00 ) User Guide</font>]] ===
 
−
 
 
−
=== [[IoTGateway/BSP/Linux/AM335x/AM335x_LBV2_User_Guide|<span id="version_1_.28based_on_ti-sdk-am335x-evm-06.00.00.00_.29" class="mw-headline"><font color="#0066cc">Version 2 (based on ti-sdk-am335x-evm-02.00.00.00.00 ) User Guide</font></span>]] ===
 
−
 
 
−
=== [http://ess-wiki.advantech.com.tw/view/IoTGateway/BSP/Linux/AM57xx/AM57xx_User_Guide <span id="version_1_.28based_on_ti-sdk-am335x-evm-06.00.00.00_.29" class="mw-headline"><font color="#0066cc">Version&nbsp;3 (based on Yocto 2.1) User Guide</font></span>] ===
 
−
 
 
−
*[[Function_Test|Function Test]]
 
−
 
 
−
=== FAQ ===
 
−
 
 
−
*[[IoTGateway/BSP/Linux/AM335x/FAQ|FAQ]]
 
−
 
 
−
== AM57xx ==
 
−
 
 
−
=== [http://ess-wiki.advantech.com.tw/view/IoTGateway/BSP/Linux/AM57xx/OS_Support_List <font color="#0066cc">OS Support List(base on Yocto 2.1)</font>] ===
 
−
 
 
−
=== [http://ess-wiki.advantech.com.tw/view/IoTGateway/BSP/Linux/AM57xx/AM57xx_User_Guide <font color="#0066cc">Version 1 (based on Yocto 2.1) User Guide</font>] ===
 
−
 
 
−
*[[Getting_Started|Function Test]]
 
−
 
 
−
=== FAQ ===
 
  
−
*[[IoTGateway/BSP/Linux/AM57xxx/FAQ|FAQ]]
+
*[[SW_Service/API|SUSI 4.0]]
−
 
+
*[[SW_Service/SUSI_IoT|SUSI IoT]]  
−
== ELAA ==
+
*[[WISE-PaaS/RMM_Agent|RMM-Agent]]  
−
 
 
−
*[[IoTGateway/BSP/Linux/ELAA/Document|Document]]
 
−
 
 
−
== Add on value ==
 
  
−
*[[SW_Service/API|SUSI 4.0]]
 
−
*[[SW_Service/SUSI_IoT|SUSI IoT]]
 
−
*[[WISE-PaaS/RMM_Agent|RMM-Agent]]
 
 
[[Category:BSP]]
 
[[Category:BSP]]

Latest revision as of 13:54, 2 October 2024


i.MX6

RISC Image Naming Rule

Technical Specification

OS support list (Get BSP & image)

User Guide

FAQ

i.MX7

OS Support List(based on Yocto 2.1 and later)

Version 8 (based on Yocto 2.1) User Guide

i.MX8

OS support (get BSP & image)

User Guide

FAQ

NXP i.MX eIQ Machine Learning

Quark

OS support list

User Guide

This version is based on Intel Quark BSP v1.0.4 (Yocto 1.4.2).
This version is based on Intel Quark BSP v1.2.0 (Yocto 1.7.2).
There is a newer version which is based on Intel Quark BSP v1.2.1.1 (Yocto 1.7.2).

FAQ

APQ8016

OS Support List

Linux BSP User Guide

FAQ

AM335x

Support List (Get BSP & image)

User Guide

FAQ

AM57xx

OS Support list (Get BSP & Image)

User Guide

AM62xx

OS Support list (Get Image)

User Guide(Get SDK )

RK3288

OS Support list

User Guide

FQA

RK3399

OS Support List

User Guide

RISC series(RSB-3710/RSB-4710/ROM-5780)

DS-100 

FQA

RK3568

OS Support List

RISC_series (RSB-4810) Debian10

User Guide

RISC series(RSB-4810 ROM-5880 AFE-E630)

 

RK3588

OS Support List

RISC_series (ROM-6881) Debian11


User Guide

RISC series(ROM-6881)

 

RK_ALL

User Guide

All rockchip platforms (RK3288、RK3399、RK3568、RK3588 etc) have similar funtions.

Here are the summary FAQs : 

nVidia

OS Support List

User Guide

Jetbot

Jetson AI

DevcieOn

FQA

LS1046

OS Support List

User Guide

Product 

NXP LS1046A Cortex®-A72 COM Express Type 7 Computer-on-Module 

FAQ

Phytium

Kylin OS


ELAA

Add on value

Retrieved from "https://ess-wiki.advantech.com.tw/wiki/index.php?title=IoTGateway/BSP/Linux&oldid=37054"