Difference between revisions of "IoTGateway/BSP/Linux/iMX6/Mfgtool"
From ESS-WIKI
Weichih.lin (talk | contribs) |
|||
| Line 13: | Line 13: | ||
:Set the correct boot mode, then power on. | :Set the correct boot mode, then power on. | ||
:[[File:Rom5420-mfgtool.jpg|200px|Rom5420-mfgtool.jpg]] | :[[File:Rom5420-mfgtool.jpg|200px|Rom5420-mfgtool.jpg]] | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
=== EBC-RS03 === | === EBC-RS03 === | ||
| Line 59: | Line 39: | ||
[profiles] | [profiles] | ||
chip = Linux | chip = Linux | ||
| − | |||
| − | |||
| − | |||
[LIST] | [LIST] | ||
| Line 67: | Line 44: | ||
[variable] | [variable] | ||
| − | + | DDR = 1G | |
| + | board = imx6qrom5420b1 | ||
mmc = 0 | mmc = 0 | ||
image = fsl-image-x11-imx6qrom5420-20141218174618.rootfs.sdcard | image = fsl-image-x11-imx6qrom5420-20141218174618.rootfs.sdcard | ||
| − | + | which operation you want to do | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
[LIST] | [LIST] | ||
name = | name = | ||
ADV Image update whole image(including rootfs) | ADV Image update whole image(including rootfs) | ||
| + | ADV adv-loader & Image adv-loader & Image | ||
ADV kernel update zImage and dtb file | ADV kernel update zImage and dtb file | ||
ADV u-boot update u-boot | ADV u-boot update u-boot | ||
| Line 179: | Line 60: | ||
[variable] | [variable] | ||
| − | + | DDR = (size of memory) | |
| + | board = (projects name) | ||
mmc = ( “0” means “emmc” ,”1” means “SD Card” .) | mmc = ( “0” means “emmc” ,”1” means “SD Card” .) | ||
image = (If you want to update whole image,fill the image file name ) | image = (If you want to update whole image,fill the image file name ) | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
= Copy file = | = Copy file = | ||
| − | You must copy file to '''Profiles\Linux\OS Firmware\files''' | + | You must copy file to '''Profiles\Linux\OS Firmware\files\imx6qrsb4411a1-1G\''' |
ADV Image fsl-image-qt5-imx6qprom7421a1-20170116192833.rootfs.sdcard | ADV Image fsl-image-qt5-imx6qprom7421a1-20170116192833.rootfs.sdcard | ||
| Line 197: | Line 73: | ||
ADV u-boot u-boot_crc.bin.crc & u-boot_crc.bin | ADV u-boot u-boot_crc.bin.crc & u-boot_crc.bin | ||
ADV adv-loader SPL | ADV adv-loader SPL | ||
| + | |||
Revision as of 04:02, 22 May 2018
User Guide for using mfgtool
Enter recovery mode
ROM-5420
- Set the correct boot mode, then power on.
EBC-RS03
- Set the correct boot mode, then power on.
Other Projects
- Set eng mode,then power on(1-off,2-on)
Connect the OTG to the PC
- After connecting to PC, a HID-compliant device will be shown in the Device
Modify config file
modify cfg.ini
- mfgtools/cfg.ini
ROM-5420
[profiles] chip = Linux [LIST] name = ADV u-boot [variable] DDR = 1G board = imx6qrom5420b1 mmc = 0 image = fsl-image-x11-imx6qrom5420-20141218174618.rootfs.sdcard
which operation you want to do
[LIST] name = ADV Image update whole image(including rootfs) ADV adv-loader & Image adv-loader & Image ADV kernel update zImage and dtb file ADV u-boot update u-boot ADV adv-loader update adv-loader
define config variable
[variable] DDR = (size of memory) board = (projects name) mmc = ( “0” means “emmc” ,”1” means “SD Card” .) image = (If you want to update whole image,fill the image file name )
Copy file
You must copy file to Profiles\Linux\OS Firmware\files\imx6qrsb4411a1-1G\
ADV Image fsl-image-qt5-imx6qprom7421a1-20170116192833.rootfs.sdcard ADV kernel zImage and dtb file ADV u-boot u-boot_crc.bin.crc & u-boot_crc.bin ADV adv-loader SPL
Running mfgtool and update
running the MfgTool2.exe and update
- If you can’t running mfgtool2.exe, you can check MfgTool.log
- Click “Start”,you can get information form debug console
- After update finish,it will be shown below
- Click “Exit” to terminate the application.
