Difference between revisions of "IoTGateway/BSP/Linux/iMX6/Mfgtool"

From ESS-WIKI
Jump to: navigation, search
(Modify description)
 
(27 intermediate revisions by 3 users not shown)
Line 1: Line 1:
 
<big><big><big>User Guide for using mfgtool</big></big></big>
 
<big><big><big>User Guide for using mfgtool</big></big></big>
 +
 
{| align="right"
 
{| align="right"
−
| __TOC__
+
|-
−
|}
+
| __TOC__
 +
|}
 
<!--
 
<!--
 
-->
 
-->
 +
= Download Mfgtools =
 +
 +
:Yocto 2.1
 +
::branch = 4.1.15
 +
 +
git clone -b '''branch''' [https://github.com/ADVANTECH-Corp/Mfgtools.git https://github.com/ADVANTECH-Corp/Mfgtools.git]
 +
 +
= Enter recovery mode =
 +
 +
=== ROM-5420 ===
 +
 +
:Set the correct boot mode, then power on.
 +
:[[File:Rom5420-mfgtool.jpg|200px|Rom5420-mfgtool.jpg]]
 +
 +
=== EBC-RS03 ===
  
−
=Step 1=
 
−
===ROM-5420===
 
 
:Set the correct boot mode, then power on.
 
:Set the correct boot mode, then power on.
−
:[[File:rom5420-mfgtool.jpg|200px]]
+
:[[File:Ebcrs03-mfgtool.jpg|200px|Ebcrs03-mfgtool.jpg]]
−
===ROM-3420===
+
 
−
# ATX mode
+
=== EBC-RM01 ===
−
#: In power off state,press power key for 5 secs and release
+
 
−
# AT mode
+
:Set the correct boot mode, please do not insert the boot SD card. Then power on.
−
#: Press power key ,then plug AC adapter,release power key after 5 secs
+
[[File:EBCRM01-mfgtool.jpg|200px|EBCRM01-mfgtool.jpg]]
−
===Other Projects===
+
 
−
:Set end mode,then power on(1-off,2-on)
+
=== Other Projects ===
−
:[[File:other_project_mfgtool.jpg|200px]]
+
 
 +
:Set eng mode,then power on(1-off,2-on)
 +
:[[File:Other project mfgtool.jpg|200px|Other project mfgtool.jpg]]
 +
 
 +
= Connect the OTG to the PC =
  
−
=Step 2=
 
−
==Connect the OTG to the PC==
 
 
:After connecting to PC, a HID-compliant device will be shown in the Device
 
:After connecting to PC, a HID-compliant device will be shown in the Device
−
:[[File:dm_mfgtool.jpg ‎|500px]]
+
:[[File:Dm mfgtool.jpg|500px|Dm mfgtool.jpg]]
 +
 
 +
= Modify config file =
 +
 
 +
== modify cfg.ini ==
 +
 
 +
:mfgtools/cfg.ini
  
−
=Step 3=
 
−
==modify cfg.ini==
 
−
:path: mfgtools/cfg.ini
 
 
  [profiles]
 
  [profiles]
 
  chip = Linux
 
  chip = Linux
 
   
 
   
 
  [platform]
 
  [platform]
−
board = SabreSD
 
 
   
 
   
 
  [LIST]
 
  [LIST]
−
  name = ADV u-boot
+
  name = ADV adv-loader & Image
 
   
 
   
 +
#Projects
 +
imx6q-epcrs200-a1 1G
 +
imx6dl-ebcrs03-a1 1G
 +
imx6dl-ubc220-a1 1G
 +
imx6q-ubc220-a1 1G
 +
imx6q-ebcrb01-a1 1G
 +
imx6q-ebcrs03-a1 2G
 +
imx6qp-rom7421-a1 1G
 +
imx6qp-rom7421-a1 2G
 +
imx6q-rom3420-a1 1G
 +
imx6q-rom3420-a1 2G
 +
imx6q-rom5420-a1 1G
 +
imx6q-rom5420-a1 2G
 +
imx6q-rom5420-b1 1G
 +
imx6dl-rom5420-b1 1G
 +
imx6dl-rom5420-b1 2G
 +
imx6q-rom5420-b1 2G
 +
imx6q-rom7420-a1 1G
 +
imx6q-rom7420-a1 2G
 +
imx6q-rsb4410-a1 1G
 +
imx6q-rsb4410-a2 1G
 +
imx6q-rsb4411-a1 1G
 +
imx6q-epcrs200-a1 1G
 +
imx6q-rsb4411-a1 2G
 +
imx6dl-rom5420-b1 512M
 +
imx6dl-rom7421-a1 1G
 +
imx6dl-rom7421-a1 512M
 +
imx7d-ebcrm01-a1 2G
 +
 
  [variable]
 
  [variable]
−
  dtb = imx6dl-rom5420-b1
+
  DDR = 1G
 +
board = imx6q-rsb4411-a1
 
  mmc = 0
 
  mmc = 0
−
  image = fsl-image-x11-imx6qrom5420-20141218174618.rootfs.sdcard
+
  image = fsl-image-qt5-imx6qrsb4411-20141218174618.rootfs.sdcard
 +
 
 +
which operation you want to do
  
−
==which operation you want to do==
 
 
  [LIST]
 
  [LIST]
 
  name =  
 
  name =  
−
  ADV Image update whole image(including rootfs)
+
  ADV adv-loader & Image adv-loader & Image
−
  ADV kernel update zImage and dtb file
+
  ADV kernel update zImage and dtb file for i.MX6
−
  ADV u-boot update u-boot
+
  ADV u-boot update u-boot for i.MX6
−
  ADV adv-loader update adv-loader
+
  ADV adv-loader update adv-loader for i.MX6
−
==define config variable==
+
ADV Image update total image for i.MX6
 +
ADV imx7 u-boot update u-boot for i.MX7
 +
ADV imx7 qspi u-boot update u-boot to qspi for i.MX7
 +
ADV imx7 kernel update zImage and dtb file for i.MX7
 +
ADV imx7 Image update total image for i.MX7
 +
 
 +
== define config variable ==
 +
 
 
  [variable]
 
  [variable]
−
  dtb = (name of dtb file)
+
  DDR = (size of memory)
 +
board = (projects name)
 
  mmc = ( “0” means “emmc” ,”1” means “SD Card” .)
 
  mmc = ( “0” means “emmc” ,”1” means “SD Card” .)
 
  image = (If you want to update whole image,fill the image file name )
 
  image = (If you want to update whole image,fill the image file name )
 +
 +
= Copy file =
 +
 +
You must copy file to '''Profiles\Linux\OS Firmware\files\imx6qrsb4411a1-1G\'''
 +
 +
ADV Image fsl-image-qt5-imx6qrsb4411-20141218174618.rootfs.sdcard
 +
ADV kernel zImage and dtb file
 +
ADV u-boot u-boot_crc.bin.crc & u-boot_crc.bin
 +
ADV adv-loader SPL
 +
ADV imx7 u-boot u-boot-imx7d-ebcrm01-a1-2G.imx
 +
ADV imx7 qspi u-boot u-boot-imx7d-ebcrm01-a1-2G.imx
 +
ADV imx7 kernel zImage and dtb file
 +
ADV imx7 Image fsl-image-qt5-imx7debcrm01a1-20190102101920.rootfs.sdcard
 +
 +
= Running mfgtool and update =
 +
 +
running the MfgTool2.exe and update
 +
 +
:[[File:Mfgtool.jpg|400px|Mfgtool.jpg]]
 +
 +
#If you can’t running mfgtool2.exe, you can check MfgTool.log
 +
#Click “Start”,you can get information form debug console
 +
#:[[File:Debug mfgtool.jpg|600px|Debug mfgtool.jpg]]
 +
#After update finish,it will be shown below
 +
#:[[File:Mfgtool2.jpg|400px|Mfgtool2.jpg]]
 +
#Click “Exit” to terminate the application.

Latest revision as of 10:16, 25 February 2019

User Guide for using mfgtool

Download Mfgtools

Yocto 2.1
branch = 4.1.15
git clone -b branch https://github.com/ADVANTECH-Corp/Mfgtools.git

Enter recovery mode

ROM-5420

Set the correct boot mode, then power on.
Rom5420-mfgtool.jpg

EBC-RS03

Set the correct boot mode, then power on.
Ebcrs03-mfgtool.jpg

EBC-RM01

Set the correct boot mode, please do not insert the boot SD card. Then power on.

EBCRM01-mfgtool.jpg

Other Projects

Set eng mode,then power on(1-off,2-on)
Other project mfgtool.jpg

Connect the OTG to the PC

After connecting to PC, a HID-compliant device will be shown in the Device
Dm mfgtool.jpg

Modify config file

modify cfg.ini

mfgtools/cfg.ini
[profiles]
chip = Linux

[platform]

[LIST]
name = ADV adv-loader & Image

#Projects
imx6q-epcrs200-a1	1G
imx6dl-ebcrs03-a1	1G
imx6dl-ubc220-a1	1G
imx6q-ubc220-a1		1G
imx6q-ebcrb01-a1	1G
imx6q-ebcrs03-a1	2G
imx6qp-rom7421-a1	1G
imx6qp-rom7421-a1	2G
imx6q-rom3420-a1	1G
imx6q-rom3420-a1	2G
imx6q-rom5420-a1	1G
imx6q-rom5420-a1	2G
imx6q-rom5420-b1	1G
imx6dl-rom5420-b1	1G
imx6dl-rom5420-b1	2G
imx6q-rom5420-b1	2G
imx6q-rom7420-a1	1G
imx6q-rom7420-a1	2G
imx6q-rsb4410-a1	1G
imx6q-rsb4410-a2	1G
imx6q-rsb4411-a1	1G
imx6q-epcrs200-a1	1G
imx6q-rsb4411-a1	2G
imx6dl-rom5420-b1	512M
imx6dl-rom7421-a1	1G
imx6dl-rom7421-a1	512M
imx7d-ebcrm01-a1	2G 

[variable]
DDR = 1G
board = imx6q-rsb4411-a1
mmc = 0
image = fsl-image-qt5-imx6qrsb4411-20141218174618.rootfs.sdcard

which operation you want to do 

[LIST]
name = 
ADV adv-loader & Image adv-loader & Image
ADV kernel		update zImage and dtb file for i.MX6
ADV u-boot		update u-boot for i.MX6
ADV adv-loader		update adv-loader for i.MX6
ADV Image		update total image for i.MX6
ADV imx7 u-boot		update u-boot for i.MX7
ADV imx7 qspi u-boot	update u-boot to qspi for i.MX7
ADV imx7 kernel		update zImage and dtb file for i.MX7
ADV imx7 Image		update total image for i.MX7

define config variable

[variable]
DDR = (size of memory)
board = (projects name)
mmc = ( “0” means “emmc” ,”1” means “SD Card” .)
image = (If you want to update whole image,fill the image file name )

Copy file

You must copy file to Profiles\Linux\OS Firmware\files\imx6qrsb4411a1-1G\ 

ADV Image 		fsl-image-qt5-imx6qrsb4411-20141218174618.rootfs.sdcard
ADV kernel		zImage and dtb file
ADV u-boot		u-boot_crc.bin.crc & u-boot_crc.bin
ADV adv-loader		SPL
ADV imx7 u-boot 	u-boot-imx7d-ebcrm01-a1-2G.imx
ADV imx7 qspi u-boot 	u-boot-imx7d-ebcrm01-a1-2G.imx
ADV imx7 kernel 	zImage and dtb file
ADV imx7 Image 		fsl-image-qt5-imx7debcrm01a1-20190102101920.rootfs.sdcard

Running mfgtool and update

running the MfgTool2.exe and update

Mfgtool.jpg
  1. If you can’t running mfgtool2.exe, you can check MfgTool.log
  2. Click “Start”,you can get information form debug console
    Debug mfgtool.jpg
  3. After update finish,it will be shown below
    Mfgtool2.jpg
  4. Click “Exit” to terminate the application.
Retrieved from "https://ess-wiki.advantech.com.tw/wiki/index.php?title=IoTGateway/BSP/Linux/iMX6/Mfgtool&oldid=15745"