Revision as of 03:43, 3 June 2016

User Guide for using mfgtool

Step 1

ROM-5420

Set the correct boot mode, then power on.

ROM-3420

1. ATX mode

   In power off state,press power key for 5 secs and release

2. AT mode

   Press power key ,then plug AC adapter,release power key after 5 secs

Other Projects

Set end mode,then power on(1-off,2-on)

Step 2

Connect the OTG to the PC

After connecting to PC, a HID-compliant device will be shown in the Device

Step 3

modify cfg.ini

path: mfgtools/cfg.ini

[profiles]
chip = Linux

[platform]
board = SabreSD

[LIST]
name = ADV u-boot

[variable]
dtb = imx6dl-rom5420-b1
mmc = 0
image = fsl-image-x11-imx6qrom5420-20141218174618.rootfs.sdcard

which operation you want to do

[LIST]
name = 
ADV Image 		update whole image(including rootfs)
ADV kernel		update zImage and dtb file
ADV u-boot		update u-boot
ADV adv-loader		update adv-loader

define config variable

[variable]
dtb = (name of dtb file)
mmc = ( “0” means “emmc” ,”1” means “SD Card” .)
image = (If you want to update whole image,fill the image file name )