Difference between revisions of "How to debug"
Xingxing.li (talk | contribs) |
Xingxing.li (talk | contribs) |
||
| Line 11: | Line 11: | ||
RSB4680 debug port pin define : | RSB4680 debug port pin define : | ||
| − | {| border="1" cellspacing="1" cellpadding="1 | + | {| border="1" cellspacing="1" cellpadding="1" |
|- | |- | ||
| − | + | | '''PIN''' | |
| − | + | | '''PIN Name''' | |
|- | |- | ||
| − | + | | 1 | |
| − | + | | NC | |
|- | |- | ||
| − | + | | 2 | |
| − | + | | TX | |
|- | |- | ||
| − | + | | 3 | |
| − | + | | RX | |
|- | |- | ||
| − | + | | 4 | |
| − | + | | GND | |
|} | |} | ||
[[File:RSB4680 Debug port.jpg|885x675px|RSB4680 Debug port.jpg]] | [[File:RSB4680 Debug port.jpg|885x675px|RSB4680 Debug port.jpg]] | ||
| − | + | '''Note : ''' | |
Please connect device's TX to usb2uart adapter's RX and device's RX to usb2uart adapter's TX . | Please connect device's TX to usb2uart adapter's RX and device's RX to usb2uart adapter's TX . | ||
| Line 99: | Line 99: | ||
set send pack 1000 | set send pack 1000 | ||
set window 5 | set window 5 | ||
| + | |||
</pre> | </pre> | ||
| − | + | '''Note : ''' | |
Change "/dev/ttyUSB0" according your system, Use Command "ls /dev/ttyUSB*" . | Change "/dev/ttyUSB0" according your system, Use Command "ls /dev/ttyUSB*" . | ||
Latest revision as of 03:28, 26 October 2021
Contents
USB2UART Bridge
There are plenty types of usb to uart bridge in the market . Most of them use the following chip :
Hardware PIN define
RSB4680 debug port pin define :
| PIN | PIN Name |
| 1 | NC |
| 2 | TX |
| 3 | RX |
| 4 | GND |
Note :
Please connect device's TX to usb2uart adapter's RX and device's RX to usb2uart adapter's TX .
UART parameter
- BaudRate：115200
- DataBits ：8
- StopBits ：1
- Parity ：None
- FlowControl：None or XON/XOFF
Debug on windows
Install usb2uart adapter's driver. Connect adapter to PC , you will find COM port like :
Putty is very populate tool on Windows. Download putty here.
Run PUTTY.exe, select Connection type of "Serial" , input COM port found in Device Manager.
Set Parameter like :
Then Click "Open" to start debug console.
Debug on Ubuntu
"Kermit" and "MiniCom" are very famous tools on Ubuntu.
Connect adapter to PC , find COM port :
$ ls /dev/ttyUSB* /dev/ttyUSB0
Kermit
Install Kermit :
sudo apt-get update sudo apt-get install ckermit
Config Kermit :
vi $HOME/.kermrc;
Input the following content :
set line /dev/ttyUSB0 set speed 115200 set carrier-watch off set handshake none set flow-control none robust set file type bin set file name lit set rec pack 1000 set send pack 1000 set window 5
Note :
Change "/dev/ttyUSB0" according your system, Use Command "ls /dev/ttyUSB*" .
Run kermit
sudo kermit
MiniCom
Install MiniCom:
sudo apt-get update sudo apt-get install minicom
Run kermit
$ sudo minicom Welcome to minicom 2.7 OPTIONS: I18n Compiled on Jan 1 2014, 17:13:19. Port /dev/ttyUSB0, 15:57:00 Press CTRL-A Z for help on special keys
According the tips, press CTRL-A, then press Z to show help.
+-------------------------------------------------------------------+
Minicom Command Summary |
| |
| Commands can be called by CTRL-A <key> |
| |
| Main Functions Other Functions |
| |
| Dialing directory..D run script (Go)....G | Clear Screen.......C |
| Send files.........S Receive files......R | cOnfigure Minicom..O |
| comm Parameters....P Add linefeed.......A | Suspend minicom....J |
| Capture on/off.....L Hangup.............H | eXit and reset.....X |
| send break.........F initialize Modem...M | Quit with no reset.Q |
| Terminal settings..T run Kermit.........K | Cursor key mode....I |
| lineWrap on/off....W local Echo on/off..E | Help screen........Z |
| Paste file.........Y Timestamp toggle...N | scroll Back........B |
| Add Carriage Ret...U |
| |
| Select function or press Enter for none. |
+--------------------------------------------------------------------+
According the tips, press O to show configuration.
+-----[configuration]------+
| Filenames and paths |
| File transfer protocols |
| Serial port setup |
| Modem and dialing |
| Screen and keyboard |
| Save setup as dfl |
| Save setup as.. |
| Exit |
+--------------------------+
Press "↓"， move cursor to "Serial port setup" to Config parameter.
Then press "A"-"G" to set relative content as following :
+-----------------------------------------------------------------------+ | A - Serial Device : /dev/ttyUSB0 | | B - Lockfile Location : /var/lock | | C - Callin Program : | | D - Callout Program : | | E - Bps/Par/Bits : 115200 8N1 | | F - Hardware Flow Control : No | | G - Software Flow Control : No | | | | Change which setting? | +-----------------------------------------------------------------------+
When configuration is done, back to choose "Save setup as dfl" to save as default configuration.