Difference between revisions of "RSB-4680 user guide"

Revision as of 06:37, 26 October 2021

資源特性(Features)

• Rockchip ARM Cortex-A17 RK3288 Quad Core, 最高可达1.6GHz
• 搭载 2GB DDR3L 内存及 8GB eMMC
• HDMI 3840x2160 at 60Hz, VGA 1920x1200 at 60Hz, 支持双通道18/24/30 bit LVDS
• 支持 4K H.264/H.265 视频解码器
• 6 UART, 6 USB2.0, 1 GbE, 8 GPIO, 1 MIPI CSI, 1 SPI
• 支持WIFI/ BT M.2, 3G/ 4G mini-PCIe
• Support Linux and Android

訂購資訊图片待换(Ordering Information)

换一张订购信息图片

规格（Specifications）

接口布局和尺寸(Layout and Sizes)

接口布局圖 Board Dimension Layout 

Connector List

接口引脚定義 (Pin definitions)

• 电池扣（RTC）
• 串口（RS232_DB,RS232/485,Internal RS232）
• 显示接口（LVDS,LVDS_Balight,HDMI,VGA）
• LAN接口(LAN)
• USB接口（USB34,USB Pin header,OTG）
• 音频接口（Audio）
• Mico SD&SIM Card
• 电源及指示灯和开关机复位按钮（DC Power,Power Button&LED,Recover,Reset Button）  
• GPIO接口
• MINI PCIE接口
• M.2接口
• SPI，I2C接口
• Jumper List

 机械尺寸  (Mechanical Characteristics)

快速入门 (Quick Start)

系统下载 (OS Download)

'Linux系统 (Linux OS)'   

• Debian 9
• Pan.Baidu_Link_for_RK3288  Password : 4jvr

• Debian 10
• Baidu link for Debian10 Password：iz74

Linux 燒錄方法 (Linux Flash eMMC Method)

NOTE : 

This way only support Linux(Debian9) upgrade to Linux(Debian9) 、 Android6.0 upgrade to Android6.0 or Android8.1 upgrade to Android8.1.

If the device is in Android, you want to upgrade to Linux(Debian9), please use Android Tool.

方法一：Update through Android Tool

 Step0:  Need to use Micro USB to connect with RSB-4680 OTG port, and other Type-A USB to connect with your PC 

Step1: Double click DriverInstall.exe .

Step2:  Enter into MASKROM mode .

There are two ways to enter MASKROM .

1. Hardware way to enter MASKROM

（1）Connect PIN2-PIN1 of CN19 to Disable eMMC，reboot device to enter MASKROM mode.

（2）After device enter into MASKROM mode，then connect PIN2-PIN3 of CN19 to Enable eMMC.

RSB-4680 Connector Layout : 

RSB-4680 CN19 PIN define : 

2. Software way to enter MASKROM

When the device boot up to debian, you can use Terminal or Debug port to input the following command :

sudo reboot loader

Click "Advantech Function" , then "Enter MASHROM" button to enter MASHROM mode .

Step3: Select the image path . 

Step4 : Click update button to upgrade images .

Step5 : When“下載完成(Download finish )” , please unplug the Micro USB with RSB-4680 , then turn off and turn on the power again .

Step6 : Please remove the Micro USB and the poewer , then reboot the device , you will see the Debian Desktop. 

方法二：Update image through SD-Card 

Download SD DiskTool

https://github.com/ADVANTECH-Rockchip/linux_tools/tree/rk3288_linux_v2.0 

Step 1 : Put images to AndroidTool/rockdev/image, Make sure path is correct.

Step 2 : Double click rk3328-mkupdate.bat in AndroidTool/rockdev/ .

If there is no error, you will find update.img in AndroidTool/rockdev/ .

Generate SD card

Step 1 : Insert SD card to PC， Double click SD_Firmware_Tool.exe in SDDiskTool .

Step 2 : Choose SD card .

Step 3 : Choose update.img .

Step 4 : Create SD card .

NOTE : 

The capacity of SD card is at least 4GB.

Upgrade image from SD card

Step 1 : Insert SD card to device .

Step 2 : Power up or reboot device， it will boot from SD card to auto upgrade images .

Step 3 : When upgrade is finish, you will get "Doing Actions succeeded,please remove sdcard......" on screen or debug console .

Step 4 : Remove SD card， the device will auto reboot .

Linux系统的基本使用(Linux System Basic Operating Method)

User Guide

• Linux BSP build and update image.
• Environment_set_up.
• How_to_do.
• RK3288_qt5Creater.
• qt5Creater_toolchain_Qt_5.11.3
• How_to flash_the_Debian_image_into_RSB-4680

通用方法(General Method)

• 查看CPU温度(Check CPU Temperature)

    root@imx8qxprom5620a1:/# cat /sys/devices/virtual/thermal/thermal_zone0/temp 44600

    # 或者直接以度爲單位顯示 echo $[$(cat /sys/class/thermal/thermal_zone0/temp)/1000]° >>> 45°

• 查看CPU频率(Check CPU Frequency)

           cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq 
           >> 900000
           cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq    
           >> 1200000

• 查看内存容量(Check Memory Capacity)

root@imx8qxprom5620a1:/# busybox free -m
             total       used       free     shared    buffers     cached
Mem:       1794920     516080    1278840      17252      9852        80292
-/+ buffers/cache:     425936    1368984
Swap:            0          0          0

• 查看存储容量(Check Storage Capacity)

root@imx8qxprom5620a1:/# busybox df -h
Filesystem                Size      Used Available Use% Mounted on
/dev/root                13.4G      1.7G     11.1G  13% /
devtmpfs                395.8M      4.0K    395.8M   0% /dev
tmpfs                   876.4M         0    876.4M   0% /dev/shm
tmpfs                   876.4M     16.5M    859.9M   2% /run
tmpfs                   876.4M         0    876.4M   0% /sys/fs/cgroup
tmpfs                   876.4M      4.0K    876.4M   0% /tmp
tmpfs                   876.4M    280.0K    876.2M   0% /var/volatile
/dev/mmcblk0p2           13.6G      1.7G     11.3G  13% /run/media/mmcblk0p2
/dev/mmcblk0p1           63.9M     23.4M     40.5M  37% /run/media/mmcblk0p1
/dev/mmcblk1p1           63.9M     23.4M     40.5M  37% /run/media/mmcblk1p1
tmpfs                   175.3M     88.0K    175.2M   0% /run/user/0
root@imx8qxprom5620a1:/#

• 网路Ping測試(Ping Network Testing)

Command：ifconfig

root@linaro-alip:~# ifconfig
docker0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        inet 172.17.0.1  netmask 255.255.0.0  broadcast 172.17.255.255
        ether 02:42:9d:3a:25:6f  txqueuelen 0  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

<span style="color:#FF0000;">eth0</span>: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet <span style="color:#FF0000;">192.168.127.100</span>  netmask <span style="color:#FF0000;">255.255.255.0</span>  broadcast 192.168.127.255
        inet6 fe80::3269:bcb5:eaa7:b6b7  prefixlen 64  scopeid 0x20<link>
        ether c4:00:ad:41:6d:fb  txqueuelen 1000  (Ethernet)
        RX packets 33  bytes 3975 (3.8 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 32  bytes 2784 (2.7 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
        device interrupt 44

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1  (Local Loopback)
        RX packets 960  bytes 64320 (62.8 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 960  bytes 64320 (62.8 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

Command：Ping  '192.168.127.100'

root@linaro-alip:~# ping 192.168.127.100
PING <span style="color:#FF0000;">192.168.127.100</span> (192.168.127.100) 56(84) bytes of data.
64 bytes from 192.168.127.100: icmp_seq=1 ttl=64 time=0.200 ms
64 bytes from 192.168.127.100: icmp_seq=2 ttl=64 time=0.161 ms
64 bytes from 192.168.127.100: icmp_seq=3 ttl=64 time=0.147 ms
^C
--- <span style="color:#FF0000;">192.168.127.100</span> ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2ms
rtt min/avg/max/mdev = 0.147/0.169/0.200/0.024 ms

• 設置RTC (RTC Setting) 

     root@imx8qxprom5620a1:/# systemctl stop ntpdate.service
     root@imx8qxprom5620a1:/# date 090816072021 && hwclock -w && date
             Wed Sep  8 16:07:00 UTC 2021
             Wed Sep  8 16:07:00 UTC 2021
     root@imx8qxprom5620a1:/# date
             Wed Sep  8 16:07:06 UTC 2021
     root@imx8qxprom5620a1:/#'''

Linux BSP編譯方法(Android BSP Compile Method)

Yocto 3.0