Difference between revisions of "音频接口（Audio）"
From ESS-WIKI
Xingxing.li (talk | contribs) (Created page with "== '''Audio (CN2)''' == '''RSB-4680 supports line-out stereo speakers, MIC in and speaker out. Earphones can be connected to the line-out pin header, and the microphone can b...") |
Xingxing.li (talk | contribs) |
||
| (3 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
| − | == '''Audio ( | + | === '''Audio (AUDIO)'''<br/>RSB-4710 supports Line-Out, Line-In, Mic-In, and Speaker-Out. Earphones should not be connected to the Line-Out pin header. If earphone functionality is required, an amplifier must be added, and the microphone connected to the Mic-In pin header. RSB-4710 also supports a mono speaker (2.8W 4Ω or 1.5W 8Ω). Use a cable (Advantech part number: 1700031093-01) for Line-Out and Mic-In tests.The audio connector pins are defined below === |
| − | |||
| − | |||
{| border="1" cellspacing="1" cellpadding="1" style="width:500px;" | {| border="1" cellspacing="1" cellpadding="1" style="width:500px;" | ||
| Line 11: | Line 9: | ||
|- | |- | ||
| 1 | | 1 | ||
| − | | | + | | LOUTRC_M<br/> |
| 2 | | 2 | ||
| − | | | + | | LOUTLC_M<br/> |
|- | |- | ||
| 3 | | 3 | ||
| − | | | + | | NC |
| 4 | | 4 | ||
| − | | | + | | NC |
|- | |- | ||
| 5 | | 5 | ||
| − | | | + | | GND_A<br/> |
| 6 | | 6 | ||
| − | | | + | | GND_A<br/> |
|- | |- | ||
| 7 | | 7 | ||
| Line 31: | Line 29: | ||
|- | |- | ||
| 9 | | 9 | ||
| − | | | + | | LINE_IN_R<br/> |
| 10 | | 10 | ||
| − | | | + | | LINE_IN_L<br/> |
|- | |- | ||
| 11 | | 11 | ||
| − | | | + | | SPO_P<br/> |
| 12 | | 12 | ||
| − | | | + | | SPO_N<br/> |
|} | |} | ||
| − | + | [[File:Audio-connector.PNG|RTENOTITLE]] | |
Latest revision as of 02:26, 21 March 2022
Audio (AUDIO)
RSB-4710 supports Line-Out, Line-In, Mic-In, and Speaker-Out. Earphones should not be connected to the Line-Out pin header. If earphone functionality is required, an amplifier must be added, and the microphone connected to the Mic-In pin header. RSB-4710 also supports a mono speaker (2.8W 4Ω or 1.5W 8Ω). Use a cable (Advantech part number: 1700031093-01) for Line-Out and Mic-In tests.The audio connector pins are defined below
| Pin | Pin Name | Pin | Pin Name |
| 1 | LOUTRC_M |
2 | LOUTLC_M |
| 3 | NC | 4 | NC |
| 5 | GND_A |
6 | GND_A |
| 7 | MIC_IN1_P |
8 | MIC_IN1_N |
| 9 | LINE_IN_R |
10 | LINE_IN_L |
| 11 | SPO_P |
12 | SPO_N |
