Difference between revisions of "1. Using RKTool RSB-4810 Debain"

Revision as of 06:46, 19 October 2023

For example, the PC used is a laptop. The specifications are as follows：

Decompress the downloaded image on the PC.

@@ Line 22: / Line 22: @@
 [[File:RSB-4810 rock.png|RTENOTITLE]]
-=== '''Step 4 :&nbsp;The device enters the burn mode''' ===
+=== '''Step 4&nbsp;:&nbsp;The device enters the burn mode''' ===
+a )&nbsp;A data cable with male USB connectors at both ends is available.
+b )&nbsp;Connect jumper cap J4 to Pin1 - Pin2(set USB-otg mode).
+Note：Default jumper cap J4 Connect Pin2-Pin3 (Set USB-host mode)
+c )&nbsp;Connect one part of the USB cable to the USB port below and the other end to the computer.
+d )&nbsp;Jump the J1 jumper cap to Pin1-Pin2, then switch on the 12V power supply.
+e )&nbsp;Then the burning tool will appear: a MASKROM word found.
+Note：Suspend or shut down the virtual machine during this process; otherwise, the pop-up information may affect the burning results.
+f )&nbsp;Jump the J1 jumper cap back to Pin2-Pin3 and click "Execute"
+g )&nbsp;Just wait patiently for the burning to finish.
 &nbsp;