Difference between revisions of "1. Using AndroidToool."

Revision as of 02:54, 28 March 2024

New released images already included AndroidTool（or RKDevTool_Release）、USB Driver（DriverAssitant_vxxx.zip）and SDDisk Tool( SDDiskTool_vxxx.zip).

If you get older images, please Download AndroidTool_vxxx.rar and SDDiskTool_vxxx.zip first.

RK3399 Android 7.1：

https://github.com/ADVANTECH-Rockchip/rk3399_tools/tree/android_7.1.2_ks

RK3399 Android 10.0

https://github.com/ADVANTECH-Rockchip/rk3399_tools/tree/rk3399-androidQ10

RK3399 Debian 9.x ：

https://github.com/ADVANTECH-Rockchip/linux_tools/tree/rk3399_linux_v231_risc

RK3399 Debian 10.x ：

https://github.com/ADVANTECH-Rockchip/linux_tools/tree/rk3399_linux_v251_risc

Step1 請先準備一條 USB 線材和 Debug Cable

USB 線材

Debug Cable

Step2 Double click DriverInstall.

Step3 Enter into MASKROM mode .

There are two ways to enter MASKROM .

1. Hardware way to enter MASKROM and download

a ) Connect jumper cap J4 to Pin1 - Pin2(set USB-otg mode).

Note：Default jumper cap J4 Connect Pin2-Pin3 (Set USB-host mode)

b ) Connect one part of the USB cable to the USB port below and the other end to the computer.

c ) Jump the J1 jumper cap to Pin1-Pin2, then switch on the 12V power supply.

d ) Then the burning tool will appear: a MASKROM word found.

Note：Suspend or shut down the virtual machine during this process; otherwise, the pop-up information may affect the burning results.

e ) Jump the J1 jumper cap back to Pin2-Pin3 and click "Execute"

f ) Just wait patiently for the burning to finish.

2. Software way to enter MASKROM and download

When the device boot up to android or debian, you can use ADB or Debug console, send command "reboot loader" .

Or Press "ctrl + c" key when booting into uboot, until get the following information on debug console :

Android 7.1：

Hit any key to stop autoboot: 0
rkboot # <INTERRUPT>
rkboot # loader

Debian 10.x：

Hit any key to stop autoboot: 0
rkboot # <INTERRUPT>
rkboot # rbrom

Click "Advantech Function" , then "Enter MASHROM" button to enter MASHROM mode .

Select the image path.

Finish the update

@@ Line 1: / Line 1: @@
-<p>New released images already included AndroidTool（or RKDevTool_Release）、USB Driver（DriverAssitant_vxxx.zip）and SDDisk Tool( SDDiskTool_vxxx.zip).
-</p><p>If you get older images, please Download AndroidTool_vxxx.rar and SDDiskTool_vxxx.zip first.
+New released images already included AndroidTool（or RKDevTool_Release）、USB Driver（DriverAssitant_vxxx.zip）and SDDisk Tool( SDDiskTool_vxxx.zip).
-</p><p>RK3399 Android 7.1：
-</p><p><a href="https://github.com/ADVANTECH-Rockchip/rk3399_tools/tree/android_7.1.2_ks" alt="https://github.com/ADVANTECH-Rockchip/rk3399_tools/tree/android_7.1.2_ks" title="https://github.com/ADVANTECH-Rockchip/rk3399_tools/tree/android_7.1.2_ks">https://github.com/ADVANTECH-Rockchip/rk3399_tools/tree/android_7.1.2_ks</a>
+If you get older images, please Download AndroidTool_vxxx.rar and SDDiskTool_vxxx.zip first.
-</p><p>RK3399 Android 10.0
-</p><p><a href="https://github.com/ADVANTECH-Rockchip/rk3399_tools/tree/rk3399-androidQ10" alt="https://github.com/ADVANTECH-Rockchip/rk3399_tools/tree/rk3399-androidQ10" title="https://github.com/ADVANTECH-Rockchip/rk3399_tools/tree/rk3399-androidQ10">https://github.com/ADVANTECH-Rockchip/rk3399_tools/tree/rk3399-androidQ10</a>
+RK3399 Android 7.1：
-</p><p>RK3399 Debian 9.x ：
-</p><p><a href="https://github.com/ADVANTECH-Rockchip/linux_tools/tree/rk3399_linux_v231_risc" alt="https://github.com/ADVANTECH-Rockchip/linux_tools/tree/rk3399_linux_v231_risc" title="https://github.com/ADVANTECH-Rockchip/linux_tools/tree/rk3399_linux_v231_risc">https://github.com/ADVANTECH-Rockchip/linux_tools/tree/rk3399_linux_v231_risc</a>
+[https://github.com/ADVANTECH-Rockchip/rk3399_tools/tree/android_7.1.2_ks https://github.com/ADVANTECH-Rockchip/rk3399_tools/tree/android_7.1.2_ks]
-</p><p>RK3399 Debian 10.x ：
-</p><p><a href="https://github.com/ADVANTECH-Rockchip/linux_tools/tree/rk3399_linux_v251_risc" alt="https://github.com/ADVANTECH-Rockchip/linux_tools/tree/rk3399_linux_v251_risc" title="https://github.com/ADVANTECH-Rockchip/linux_tools/tree/rk3399_linux_v251_risc">https://github.com/ADVANTECH-Rockchip/linux_tools/tree/rk3399_linux_v251_risc</a>
+RK3399 Android 10.0
-</p><p><b>Step1</b> <b>請先準備一條&#160;USB 線材 和 Debug Cable&#160;</b>
-</p><p><b>USB 線材</b>
+[https://github.com/ADVANTECH-Rockchip/rk3399_tools/tree/rk3399-androidQ10 https://github.com/ADVANTECH-Rockchip/rk3399_tools/tree/rk3399-androidQ10]
-</p><p><img src="/wiki/images/0/0c/RSB-4810_USB_both.png" _fck_mw_filename="RSB-4810 USB both.png" _fck_mw_origimgwidth="405" _fck_mw_origimgheight="241" alt="RTENOTITLE" title="RTENOTITLE" style="vertical-align:middle;" />
-</p><p>&#160;
+RK3399 Debian 9.x ：
-</p><p><b>Debug Cable&#160;</b>
-</p><p><img src="/wiki/images/8/8d/RSB-3710_debug_cable_2021-11-02_144650.jpg" _fck_mw_filename="RSB-3710 debug cable 2021-11-02 144650.jpg" _fck_mw_origimgwidth="508" _fck_mw_origimgheight="339" alt="RTENOTITLE" title="RTENOTITLE" style="vertical-align:middle;" />
+[https://github.com/ADVANTECH-Rockchip/linux_tools/tree/rk3399_linux_v231_risc https://github.com/ADVANTECH-Rockchip/linux_tools/tree/rk3399_linux_v231_risc]
-</p><p><b>Step2 </b>Double click DriverInstall.
-</p><p><img src="/wiki/images/3/32/Driver_Assitant_v5.11.png" _fck_mw_filename="Driver Assitant v5.11.png" _fck_mw_origimgwidth="434" _fck_mw_origimgheight="136" alt="RTENOTITLE" title="RTENOTITLE" style="vertical-align:middle;" />
+RK3399 Debian 10.x ：
-</p><p><b>Step3</b> Enter into MASKROM mode .
-</p><p>There are two ways to enter MASKROM .
+[https://github.com/ADVANTECH-Rockchip/linux_tools/tree/rk3399_linux_v251_risc https://github.com/ADVANTECH-Rockchip/linux_tools/tree/rk3399_linux_v251_risc]
-</p><p><b>1. Hardware way to enter MASKROM</b>
-</p><p>a )&#160;Connect jumper cap J4 to Pin1 - Pin2(set USB-otg mode).
+'''Step1''' '''請先準備一條&nbsp;USB 線材 和 Debug Cable&nbsp;'''
-</p><p>Note：Default jumper cap J4 Connect Pin2-Pin3 (Set USB-host mode)
-</p><p><img src="/wiki/images/0/08/RSB-4810_J4_setting.png" _fck_mw_filename="RSB-4810 J4 setting.png" _fck_mw_origimgwidth="416" _fck_mw_origimgheight="222" alt="RTENOTITLE" title="RTENOTITLE" style="vertical-align:middle;" />
+'''USB 線材'''
-</p><p>b )&#160;Connect one part of the USB cable to the USB port below and the other end to the computer.
-</p><p><img src="/wiki/images/1/19/RSB-4810_USB_conjoint.png" _fck_mw_filename="RSB-4810 USB conjoint.png" _fck_mw_origimgwidth="414" _fck_mw_origimgheight="340" alt="RTENOTITLE" title="RTENOTITLE" style="vertical-align:middle;" />
+[[File:RSB-4810 USB both.png|RTENOTITLE]]
-</p><p>c )&#160;Jump the J1 jumper cap to Pin1-Pin2, then switch on the 12V power supply.
-</p><p><img src="/wiki/images/e/e6/RSB-4810_J1_setting.png" _fck_mw_filename="RSB-4810 J1 setting.png" _fck_mw_origimgwidth="415" _fck_mw_origimgheight="299" alt="RTENOTITLE" title="RTENOTITLE" style="vertical-align:middle;" />
+&nbsp;
-</p><p>d )&#160;Then the burning tool will appear: a MASKROM word found.
-</p><p>Note：Suspend or shut down the virtual machine during this process; otherwise, the pop-up information may affect the burning results.
+'''Debug Cable&nbsp;'''
-</p><p><img src="/wiki/images/6/6e/RSB-4810_RKTool_MASKROM.png" _fck_mw_filename="RSB-4810 RKTool MASKROM.png" _fck_mw_origimgwidth="420" _fck_mw_origimgheight="210" alt="RTENOTITLE" title="RTENOTITLE" style="vertical-align:middle;" />
-</p><p>e )&#160;Jump the J1 jumper cap back to Pin2-Pin3 and click "Execute"
+[[File:RSB-3710 debug cable 2021-11-02 144650.jpg|RTENOTITLE]]
-</p><p><img src="/wiki/images/9/9e/RSB-4810_J1_setting_1.png" _fck_mw_filename="RSB-4810 J1 setting 1.png" _fck_mw_origimgwidth="417" _fck_mw_origimgheight="239" alt="RTENOTITLE" title="RTENOTITLE" style="vertical-align:middle;" />
-</p><p><img src="/wiki/images/b/b3/RSB-4810_burning.png" _fck_mw_filename="RSB-4810 burning.png" _fck_mw_origimgwidth="417" _fck_mw_origimgheight="208" alt="RTENOTITLE" title="RTENOTITLE" style="vertical-align:middle;" />
+'''Step2 '''Double click DriverInstall.
-</p><p>f )&#160;Just wait patiently for the burning to finish.
-</p><p><img src="/wiki/images/5/5d/RSB-4810_RKTool_success.png" _fck_mw_filename="RSB-4810 RKTool success.png" _fck_mw_origimgwidth="414" _fck_mw_origimgheight="208" alt="RTENOTITLE" title="RTENOTITLE" style="vertical-align:middle;" />
+[[File:Driver Assitant v5.11.png|RTENOTITLE]]
-</p><p><b>2. Software way to enter MASKROM</b>
-</p><p>When the device boot up to android or debian, you can use ADB or Debug console, send command "reboot loader"&#160;.
+'''Step3''' Enter into MASKROM mode .
-</p><p>Or Press&#160;"ctrl + c" key when booting into uboot, until get the following information on debug console&#160;:&#160;
-</p><p><b>Android 7.1：</b>
+There are two ways to enter MASKROM .
-</p>
+'''1. Hardware way to enter MASKROM and download'''
+a )&nbsp;Connect jumper cap J4 to Pin1 - Pin2(set USB-otg mode).
+Note：Default jumper cap J4 Connect Pin2-Pin3 (Set USB-host mode)
+[[File:RSB-4810 J4 setting.png|RTENOTITLE]]
+b )&nbsp;Connect one part of the USB cable to the USB port below and the other end to the computer.
+[[File:RSB-4810 USB conjoint.png|RTENOTITLE]]
+c )&nbsp;Jump the J1 jumper cap to Pin1-Pin2, then switch on the 12V power supply.
+[[File:RSB-4810 J1 setting.png|RTENOTITLE]]
+d )&nbsp;Then the burning tool will appear: a MASKROM word found.
+Note：Suspend or shut down the virtual machine during this process; otherwise, the pop-up information may affect the burning results.
+[[File:RSB-4810 RKTool MASKROM.png|RTENOTITLE]]
+e )&nbsp;Jump the J1 jumper cap back to Pin2-Pin3 and click "Execute"
+[[File:RSB-4810 J1 setting 1.png|RTENOTITLE]]
+[[File:RSB-4810 burning.png|RTENOTITLE]]
+f )&nbsp;Just wait patiently for the burning to finish.
+[[File:RSB-4810 RKTool success.png|RTENOTITLE]]
+'''2. Software way to enter MASKROM and download'''
+When the device boot up to android or debian, you can use ADB or Debug console, send command "reboot loader"&nbsp;.
+Or Press&nbsp;"ctrl + c" key when booting into uboot, until get the following information on debug console&nbsp;:&nbsp;
+'''Android 7.1：'''
 <pre>Hit any key to stop autoboot: 0
-rkboot # &amp;lt;INTERRUPT&amp;gt;
+rkboot # &lt;INTERRUPT&gt;
 rkboot # loader</pre>
-<p><b>Debian 10.x：</b>
-</p>
+'''Debian 10.x：'''
 <pre>Hit any key to stop autoboot: 0
-rkboot # &amp;lt;INTERRUPT&amp;gt;
+rkboot # &lt;INTERRUPT&gt;
 rkboot # rbrom</pre>
-<p>&#160;
-</p><p><img src="/wiki/images/9/98/242.jpg" _fck_mw_filename="242.jpg" _fck_mw_origimgwidth="908" _fck_mw_origimgheight="461" alt="RTENOTITLE" title="RTENOTITLE" style="vertical-align:middle;" />
+&nbsp;
-</p><p>Click "Advantech Function" , then "Enter MASHROM" button to enter MASHROM mode .
-</p><p><img src="/wiki/images/4/4a/RK3288_upgrade_Loader_MASHROM.png" _fck_mw_filename="RK3288 upgrade Loader MASHROM.png" _fck_mw_origimgwidth="915" _fck_mw_origimgheight="466" alt="RTENOTITLE" title="RTENOTITLE" style="vertical-align:middle;" />
+[[File:242.jpg|RTENOTITLE]]
-</p><p>&#160;
-</p><p><b>Step4</b> Select the image path.
+Click "Advantech Function" , then "Enter MASHROM" button to enter MASHROM mode .
-</p><p><img src="/wiki/images/8/80/2422.jpg" _fck_mw_filename="2422.jpg" _fck_mw_origimgwidth="909" _fck_mw_origimgheight="465" alt="RTENOTITLE" title="RTENOTITLE" style="vertical-align:middle;" />
-</p><p><b>Step5</b> Finish the update
+[[File:RK3288 upgrade Loader MASHROM.png|RTENOTITLE]]
-</p><p><img src="/wiki/images/8/86/24222.jpg" _fck_mw_filename="24222.jpg" _fck_mw_origimgwidth="913" _fck_mw_origimgheight="461" alt="RTENOTITLE" title="RTENOTITLE" style="vertical-align:middle;" />
-</p>
+&nbsp;
+Select the image path.
+[[File:2422.jpg|RTENOTITLE]]
+Finish the update
+[[File:24222.jpg|RTENOTITLE]]

Difference between revisions of "1. Using AndroidToool."

Revision as of 02:54, 28 March 2024

Navigation menu

Personal tools

Namespaces

Variants

Views

More

Search

Navigation

Tools