Difference between revisions of "EPC-R7200 user guide"

From ESS-WIKI
Jump to: navigation, search
(39 intermediate revisions by 2 users not shown)
Line 1: Line 1:
  
−
== '''資源特性(Features)''' ==
+
== '''產品介紹(Product introduction )''' ==
 +
 
 +
 
  
 
[[File:EPC-R7200 Case s.PNG|RTENOTITLE]]
 
[[File:EPC-R7200 Case s.PNG|RTENOTITLE]]
 +
 +
=== '''產品特性(Product Features)''' ===
  
 
*NVIDIA Jetson Module Compatible: Jetson Xavier™ NX, Jetson™ TX2 NX and Jetson Nano™  
 
*NVIDIA Jetson Module Compatible: Jetson Xavier™ NX, Jetson™ TX2 NX and Jetson Nano™  
Line 10: Line 14:
 
*Industrial and Rugged design supports wide operating temperatures, power input, and vibration tolerance  
 
*Industrial and Rugged design supports wide operating temperatures, power input, and vibration tolerance  
  
−
== '''訂購資訊(Ordering Information)''' ==
+
 
  
−
[[File:EPC-R7200 orderinfo.PNG|RTENOTITLE]]
+
=== '''產品官網連結(Product official website link) ''' ===
  
−
=== '''  EPC-R7200 接口布局圖 Board Dimension Layout ''' ===
+
[https://www.advantech.com/zh-tw/products/880a61e5-3fed-41f3-bf53-8be2410c0f19/epc-r7200/mod_79c021b3-a480-41f6-9dbb-b440b06d6d5f '''EPC-7200''']
 +
 
 +
== '''硬件接口說明(Hardware interface introduction)''' ==
 +
 
 +
=== '''EPC-R7200 接口布局圖 Board Dimension Layout ''' ===
  
 
[[File:EPC-R7200 Front Real IO.PNG|RTENOTITLE]] [[File:EPC-R7200 Left Right side.PNG|RTENOTITLE]] [[File:EPC-R7200 Top Bottom.PNG|RTENOTITLE]]
 
[[File:EPC-R7200 Front Real IO.PNG|RTENOTITLE]] [[File:EPC-R7200 Left Right side.PNG|RTENOTITLE]] [[File:EPC-R7200 Top Bottom.PNG|RTENOTITLE]]
  
−
=== '''  接口引脚定義 (Pin defination) ''' ===
+
=== '''接口引脚定義 (Pin defination) ''' ===
  
 
'''DC in'''
 
'''DC in'''
Line 94: Line 102:
 
 
 
 
  
−
=== '''  机械尺寸  ('''Mechanical Characteristics) ===
+
=== '''机械尺寸  ('''Mechanical Characteristics) ===
  
 
[[File:EPC-R7200 Mechanical Specifications.PNG|RTENOTITLE]]
 
[[File:EPC-R7200 Mechanical Specifications.PNG|RTENOTITLE]]
Line 104: Line 112:
 
== '''快速入门 (Quick Start)''' ==
 
== '''快速入门 (Quick Start)''' ==
  
−
=== '''  系统下载 (OS Download)''' ===
+
=== '''系统下载 (OS Download)''' ===
  
−
*'''Linux系统 (Linux OS)'''  
+
*[http://ess-wiki.advantech.com.tw/view/AIM-Linux/BSP/NV/Linux_Ubuntu_OS_Release_note/Ubuntu18/Internal '''Linux系统 (Linux OS)''']
  
 
 
 
 
Line 112: Line 120:
 
----
 
----
  
−
=== '''  Linux 燒錄方法 (Linux Flash eMMC Method)''' ===
+
 
 +
 
 +
 
 +
 
 +
=== '''Linux 燒錄方法 (Linux Flash eMMC Method)''' ===
  
−
1.Unzip the image.tar.gz file
+
1.Prepare a Linux host system Ubuntu x64 v18.04. Download the image file and unzip the image.tar.gz file on Linux host PC.
  
 
     $ sudo tar zxvf EPC-R7200_Nano.tar.gz
 
     $ sudo tar zxvf EPC-R7200_Nano.tar.gz
Line 121: Line 133:
 
2.Enter to recovery mode by holding the recover button and plug power to boot. Release recover button around 3 seconds after plug in power.
 
2.Enter to recovery mode by holding the recover button and plug power to boot. Release recover button around 3 seconds after plug in power.
  
−
3.Check the device is in recovery mode by command “lsusb”. Will get NVidia Corp. with ID 0955:7f21
+
[[File:Debug port recoverybtn.PNG|RTENOTITLE]]
 +
 
 +
3.Connect Micro USB cable from EPC-R7200 Micro USB port to Linux host PC USB TypeA port. Check the device is in recovery mode by command “lsusb”. Will get NVidia Corp. with ID 0955:7f21
  
 
[[File:S1.png|RTENOTITLE]]
 
[[File:S1.png|RTENOTITLE]]
Line 129: Line 143:
 
   @risc-Default-string:~/EPC_R7200/210$ sudo ./flash.sh nano-epcr7200 mmcblk0p1
 
   @risc-Default-string:~/EPC_R7200/210$ sudo ./flash.sh nano-epcr7200 mmcblk0p1
  
−
[[File:S2.png|RTENOTITLE]]
+
Update the flash command for DIV0003:
 +
 
 +
[[File:EPC-R7200 flash command.jpg|RTENOTITLE]]
  
 
5.Wait around 10~15 minute to flash image to device:
 
5.Wait around 10~15 minute to flash image to device:
Line 137: Line 153:
 
6.Check the device login to system:
 
6.Check the device login to system:
  
−
[[File:S4.png|RTENOTITLE]]
+
login user: ubuntu/ubuntu
  
 
7.Check the eth1 can get the IP Addr:
 
7.Check the eth1 can get the IP Addr:
Line 145: Line 161:
 
 
 
 
  
−
=== '''  Debug 串口調試 (Debug port Setting)''' ===
+
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
=== '''Debug 串口調試 (Debug port Setting)''' ===
  
 
以 Tera Term  为例介绍如何使用串口调试功能
 
以 Tera Term  为例介绍如何使用串口调试功能
Line 170: Line 192:
 
Debug port connection (串口連接) 
 
Debug port connection (串口連接) 
  
−
[[File:Debugcom3nn 2021-09-10 140320.jpg|RTENOTITLE]]
+
 
  
 
 
 
 
Line 176: Line 198:
 
Log into Terminal  Tool (进入串口调试终端)：
 
Log into Terminal  Tool (进入串口调试终端)：
  
−
[[File:Debugcom3nn 2021-09-10 140320.jpg|RTENOTITLE]]
+
login user: ubuntu/ubuntu
  
 
 
 
 
Line 182: Line 204:
 
----
 
----
  
−
== '''Linux BSP 編譯說明 for jetson series(Linux BSP User Guide for jetson series)''' ==
+
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
= '''Linux 基本使用方法 for jetson series(Linux System Basic Operating Method for jetson series)''' =
  
−
[[Linux BSP User Guide for jetson series|http://ess-wiki.advantech.com.tw/view/Linux_BSP_User_Guide_for_jetson_series]]
+
*check module
 +
 
 +
$ cat /proc/device-tree/model
 +
 
 +
*check OS release version
 +
 
 +
ubuntu@localhost:~$ cat /etc/os-release<br/> NAME="Ubuntu"<br/> VERSION="18.04.5 LTS (Bionic Beaver)"<br/> ID=ubuntu<br/> ID_LIKE=debian<br/> PRETTY_NAME="Ubuntu 18.04.5 LTS"<br/> VERSION_ID="18.04"
 +
 
 +
*check tegra version
 +
 
 +
ubuntu@localhost:~$ cat /etc/nv_tegra_release<br/> # R32 (release), REVISION: 5.1, GCID: 26202423, BOARD: t186ref, EABI: aarch64, DATE: Fri Feb 19 16:50:29 UTC 2021
 +
 
 +
*Install stress-ng&nbsp;
 +
 
 +
$ sudo apt install stress-ng
 +
 
 +
*Execute stress test
 +
 
 +
$ stress-ng --cpu 0 --cpu-method all -t 1h
 +
 
 +
*Install jtop
 +
 
 +
$ sudo apt update<br/> $ sudo apt install python3-pip<br/> $ sudo pip3 install -U jetson-stats<br/> $ jtop
 +
 
 +
[[File:EPC-R7200 JTOP.jpg|RTENOTITLE]]
 +
 
 +
*No login prompt display: Connect debug cable and install login manager.
 +
 
 +
Reference: [https://support.system76.com/articles/login-loop-ubuntu/ https://support.system76.com/articles/login-loop-ubuntu/]
 +
 
 +
$ sudo apt install --reinstall gdm3 ubuntu-desktop gnome-shell (選gdm3)<br/> $ sudo systemctl reboot
 +
 
 +
----
 +
 
 +
= '''NVIDIA 模塊安裝(NVIDIA Jetson Module Installation)''' =
 +
 
 +
Step1: Remove 6 screws on Top Cover and then lift up Top Cover
 +
 
 +
[[File:EPC-R7200 cover.PNG|RTENOTITLE]]
 +
 
 +
Step2: Choose the right heat spreader according the JestonTM module you used Smear grease on heat spreader (Top) Remove blue tapes from thermal pad (Bottom) Fix the heat spreader on Top Cover by two screws
 +
 
 +
[[File:EPC-R7200 heat.PNG|RTENOTITLE]]
 +
 
 +
Step3: Plug JestonTM module into Sockets of carrier board. Lock 2 screws to fix JestonTM module
 +
 
 +
[[File:EPC-R7200 Moudle install.PNG|RTENOTITLE]]
 +
 
 +
Step4: Put the Top Cover on and then lock 6 screws on top of it
 +
 
 +
[[File:EPC-R7200 lock cover.PNG|RTENOTITLE]]
 +
 
 +
Step5: Enjoy your AI journey
 +
 
 +
[[File:EPC-R7200 device complete.PNG|RTENOTITLE]]
 +
 
 +
&nbsp;
  
−
== '''Linux系统的基本使用(Linux&nbsp;System Basic Operating Method)''' ==
+
= '''How to build BSP (BSP Compile)''' =
  
 +
[http://ess-wiki.advantech.com.tw/view/Linux_BSP_User_Guide_for_jetson_series http://ess-wiki.advantech.com.tw/view/Linux_BSP_User_Guide_for_jetson_series] &nbsp;
  
 
{| border="0" cellpadding="10" cellspacing="0" style="width:100%;"
 
{| border="0" cellpadding="10" cellspacing="0" style="width:100%;"

Revision as of 09:05, 9 July 2024

產品介紹(Product introduction )

 

RTENOTITLE

產品特性(Product Features)

  • NVIDIA Jetson Module Compatible: Jetson Xavier™ NX, Jetson™ TX2 NX and Jetson Nano™
  • Fanless ultra-compact Barebones PC with thermal reference design
  • AIM-Linux software service with peripheral driver integration supports NVIDIA JetPack SDK
  • Accepts flexible application-oriented UIO40-Express I/O expansion cards
  • Industrial and Rugged design supports wide operating temperatures, power input, and vibration tolerance

 

產品官網連結(Product official website link) 

EPC-7200

硬件接口說明(Hardware interface introduction)

EPC-R7200 接口布局圖 Board Dimension Layout 

RTENOTITLE RTENOTITLE RTENOTITLE

接口引脚定義 (Pin defination) 

DC in

RTENOTITLE

USB Ports

RTENOTITLE

RTENOTITLE

LAN Ports

RTENOTITLE

RTENOTITLE

HDMI

RTENOTITLE

RTENOTITLE

LED Indicator

RTENOTITLE

Side Door

RTENOTITLE

OTG Port

RTENOTITLE

Micro SD

RTENOTITLE

Nano SIM

RTENOTITLE

Bottom Door

RTENOTITLE

Debug Port

EPC-R7200 provides one Debug Port for development used. Debug cable P/N: 1700021565-01 4P-1.25 to D-SUB 9P (F) 60cm

RTENOTITLE

Recovery Key

RTENOTITLE

M.2 2230 Key E Slot

EPC-R7200 provides one M.2 2230 Key E Slot for WLAN card. P/N: EWM-W159M201E 802.11 ac/a/b/g/n + Bluetooth 5.0 M.2 2230 (A-E Key) Card

RTENOTITLE

RTENOTITLE

M.2 3042 Key B Slot

EPC-R7200 provides one M.2 3042 Key B Slot for WWAN card

RTENOTITLE

RTENOTITLE

 

机械尺寸  (Mechanical Characteristics)

RTENOTITLE

 

快速入门 (Quick Start)

系统下载 (OS Download)

 

 

 

Linux 燒錄方法 (Linux Flash eMMC Method)

1.Prepare a Linux host system Ubuntu x64 v18.04. Download the image file and unzip the image.tar.gz file on Linux host PC. 

    $ sudo tar zxvf EPC-R7200_Nano.tar.gz
    $ cd 210/

2.Enter to recovery mode by holding the recover button and plug power to boot. Release recover button around 3 seconds after plug in power.

RTENOTITLE

3.Connect Micro USB cable from EPC-R7200 Micro USB port to Linux host PC USB TypeA port. Check the device is in recovery mode by command “lsusb”. Will get NVidia Corp. with ID 0955:7f21

RTENOTITLE

4.Execute command to flash imag: 

  @risc-Default-string:~/EPC_R7200/210$ sudo ./flash.sh nano-epcr7200 mmcblk0p1

Update the flash command for DIV0003:

RTENOTITLE

5.Wait around 10~15 minute to flash image to device:

RTENOTITLE

6.Check the device login to system:

login user: ubuntu/ubuntu

7.Check the eth1 can get the IP Addr:

RTENOTITLE

 

 

 


Debug 串口調試 (Debug port Setting)

以 Tera Term  为例介绍如何使用串口调试功能 

   Baud Rate波特率：115200
   Data 数据位：8
   Parity 奇偶校验：无
&nbsp;  Stop 停止位：1
   Flow Control流控：无
 

Tera Term Tool 

RTENOTITLE

RTENOTITLE

Check the Sriel port in Device Manager (查看PC端的串口号)：

if you can not identify the Serial device , please check your serial driver. 

RTENOTITLE

Debug port connection (串口連接) 

 

 

Log into Terminal  Tool (进入串口调试终端)：

login user: ubuntu/ubuntu

 

 

 

 

Linux 基本使用方法 for jetson series(Linux System Basic Operating Method for jetson series)

  • check module

$ cat /proc/device-tree/model

  • check OS release version

ubuntu@localhost:~$ cat /etc/os-release
NAME="Ubuntu"
VERSION="18.04.5 LTS (Bionic Beaver)"
ID=ubuntu
ID_LIKE=debian
PRETTY_NAME="Ubuntu 18.04.5 LTS"
VERSION_ID="18.04"

  • check tegra version

ubuntu@localhost:~$ cat /etc/nv_tegra_release
# R32 (release), REVISION: 5.1, GCID: 26202423, BOARD: t186ref, EABI: aarch64, DATE: Fri Feb 19 16:50:29 UTC 2021

  • Install stress-ng 

$ sudo apt install stress-ng

  • Execute stress test

$ stress-ng --cpu 0 --cpu-method all -t 1h

  • Install jtop

$ sudo apt update
$ sudo apt install python3-pip
$ sudo pip3 install -U jetson-stats
$ jtop

RTENOTITLE

  • No login prompt display: Connect debug cable and install login manager.

Reference: https://support.system76.com/articles/login-loop-ubuntu/

$ sudo apt install --reinstall gdm3 ubuntu-desktop gnome-shell (選gdm3)
$ sudo systemctl reboot

NVIDIA 模塊安裝(NVIDIA Jetson Module Installation)

Step1: Remove 6 screws on Top Cover and then lift up Top Cover

RTENOTITLE

Step2: Choose the right heat spreader according the JestonTM module you used Smear grease on heat spreader (Top) Remove blue tapes from thermal pad (Bottom) Fix the heat spreader on Top Cover by two screws

RTENOTITLE

Step3: Plug JestonTM module into Sockets of carrier board. Lock 2 screws to fix JestonTM module

RTENOTITLE

Step4: Put the Top Cover on and then lock 6 screws on top of it

RTENOTITLE

Step5: Enjoy your AI journey

RTENOTITLE

 

How to build BSP (BSP Compile)

http://ess-wiki.advantech.com.tw/view/Linux_BSP_User_Guide_for_jetson_series  

Retrieved from "https://ess-wiki.advantech.com.tw/wiki/index.php?title=EPC-R7200_user_guide&oldid=36280"