Difference between revisions of "IoTGateway/BSP/Android/Gettingstarted/How to configure Capacitive Multi-touch Display"
From ESS-WIKI
Line 27: | Line 27: | ||
The ''getevent'' tool runs on the device and provides information about input devices and a live dump of kernel input events. | The ''getevent'' tool runs on the device and provides information about input devices and a live dump of kernel input events. | ||
− | + | Unexport GPIO 27 | |
− | <pre> | + | <pre># getevent -lt |
− | + | </pre> | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
+ | ==== Test[[http://ess-wiki.advantech.com.tw/wiki/index.php?title=IoTGateway/BSP/Android/Gettingstarted/How_to_use_GPIO&action=edit§ion=6 edit]] ==== | ||
<pre><code>$ getevent -lt | <pre><code>$ getevent -lt | ||
Revision as of 04:05, 3 February 2017
HID interface
- Enable HID in menuconfig
Device Drivers --->
|
- copy and rename
.config
toarch/arm/configs/imx_v7_android_defconfig<code>
</code>
Test
The getevent tool runs on the device and provides information about input devices and a live dump of kernel input events.
Unexport GPIO 27
# getevent -lt
Test[edit]
<code>$ getevent -lt [ 78826.389007] EV_ABS ABS_MT_TRACKING_ID 0000001f [ 78826.389038] EV_ABS ABS_MT_PRESSURE 000000ab [ 78826.389038] EV_ABS ABS_MT_POSITION_X 000000ab [ 78826.389068] EV_ABS ABS_MT_POSITION_Y 0000025b [ 78826.389068] EV_ABS ABS_MT_SLOT 00000001 [ 78826.389068] EV_ABS ABS_MT_TRACKING_ID 00000020 [ 78826.389068] EV_ABS ABS_MT_PRESSURE 000000b9 [ 78826.389099] EV_ABS ABS_MT_POSITION_X 0000019e [ 78826.389099] EV_ABS ABS_MT_POSITION_Y 00000361 [ 78826.389099] EV_SYN SYN_REPORT 00000000 [ 78826.468688] EV_ABS ABS_MT_SLOT 00000000 [ 78826.468688] EV_ABS ABS_MT_TRACKING_ID ffffffff [ 78826.468719] EV_ABS ABS_MT_SLOT 00000001 [ 78826.468719] EV_ABS ABS_MT_TRACKING_ID ffffffff [ 78826.468719] EV_SYN SYN_REPORT 00000000 </code>