Difference between revisions of "IoTGateway/BSP/Android/Gettingstarted/How to configure Capacitive Multi-touch Display"

From ESS-WIKI
Jump to: navigation, search
Line 6: Line 6:
 
<pre>Device Drivers --->
 
<pre>Device Drivers --->
 
       Input device support --->
 
       Input device support --->
−
             <*>&nbsp;Event interface Miscellaneous devices --->
+
             <*> Event interface Miscellaneous devices --->
−
                   <*>&nbsp;User level driver support HID Devices --->
+
                   <*>User level driver support  
−
                        [*]&nbsp;/dev/hidraw raw HID device support Special HID drivers --->
+
&nbsp;      HID Devices --->
−
                              <*>&nbsp;HID Multitouch panels
+
            [*]/dev/hidraw raw HID device support Special HID drivers --->
 +
                  <*> HID Multitouch panels
 
</pre>
 
</pre>
  

Revision as of 04:25, 3 February 2017

Configure

HID interface

  • Enable HID in menuconfig
Device Drivers --->
       Input device support --->
            <*> Event interface Miscellaneous devices --->
                  <*>User level driver support 
       HID Devices --->
            [*]/dev/hidraw raw HID device support Special HID drivers --->
                  <*> HID Multitouch panels

Device Drivers --->

Input device support --->
<*> Event interface
Miscellaneous devices --->
<*> User level driver support
HID Devices --->
[*] /dev/hidraw raw HID device support
Special HID drivers --->
<*> HID Multitouch panels


I2C interface

  • Enable I2C bus in menuconfig
Device drivers --->
        I2C support  --->
            <*> I2C support
                [*]   Enable compatibility bits for old user-space
                <*>   I2C device interface
                <*>   I2C bus multiplexing support
                        Multiplexer I2C Chip support  --->
                [*]   Autoselect pertinent helper modules
                        I2C Hardware Bus support  --->
                            <*> Atmel AT91 I2C Two-Wire interface (TWI)
                            <*> GPIO-based bitbanging I2C

copy and rename .config to arch/arm/configs/imx_v7_android_defconfig

Test

The getevent tool provides information about the touch device. 

# getevent -lt
[   78826.389007] EV_ABS       ABS_MT_TRACKING_ID   0000001f
[   78826.389038] EV_ABS       ABS_MT_PRESSURE      000000ab
[   78826.389038] EV_ABS       ABS_MT_POSITION_X    000000ab
[   78826.389068] EV_ABS       ABS_MT_POSITION_Y    0000025b
[   78826.389068] EV_ABS       ABS_MT_SLOT          00000001
[   78826.389068] EV_ABS       ABS_MT_TRACKING_ID   00000020
[   78826.389068] EV_ABS       ABS_MT_PRESSURE      000000b9
[   78826.389099] EV_ABS       ABS_MT_POSITION_X    0000019e
[   78826.389099] EV_ABS       ABS_MT_POSITION_Y    00000361
[   78826.389099] EV_SYN       SYN_REPORT           00000000
[   78826.468688] EV_ABS       ABS_MT_SLOT          00000000
[   78826.468688] EV_ABS       ABS_MT_TRACKING_ID   ffffffff
[   78826.468719] EV_ABS       ABS_MT_SLOT          00000001
[   78826.468719] EV_ABS       ABS_MT_TRACKING_ID   ffffffff
[   78826.468719] EV_SYN       SYN_REPORT           00000000
Retrieved from "https://ess-wiki.advantech.com.tw/wiki/index.php?title=IoTGateway/BSP/Android/Gettingstarted/How_to_configure_Capacitive_Multi-touch_Display&oldid=5495"