Difference between revisions of "IoTGateway/BSP/Windows10 IoT Core"
From ESS-WIKI
Daniel.hung (talk | contribs) |
Daniel.hung (talk | contribs) |
||
| Line 42: | Line 42: | ||
:First, you have to set the '''SW1''' boot switch to enable download mode. | :First, you have to set the '''SW1''' boot switch to enable download mode. | ||
| − | :Both switch pins are set to ON, and power on the RSB-4760 device. | + | :Both switch pins are set to '''ON''', and power on the RSB-4760 device. |
:[[File:Rsb4760-sw1.jpg|200px|Rsb4760-sw1.jpg]] | :[[File:Rsb4760-sw1.jpg|200px|Rsb4760-sw1.jpg]] | ||
| Line 53: | Line 53: | ||
:[[File:Db update tool.png|RTENOTITLE]] | :[[File:Db update tool.png|RTENOTITLE]] | ||
| − | :The Update Tool should detect the board and the Connection Status should show: "Connected".<br/> | + | :The Update Tool should detect the board and the Connection Status should show: "''Connected''".<br/> |
| − | :In the DragonBoard Update Tool click the "Browse" button and locate the Win10 IoT Core Image file you downloaded during ''Step 1''. | + | :In the DragonBoard Update Tool click the "''Browse''" button and locate the Win10 IoT Core Image file you downloaded during ''Step 1''. |
| − | :Click the "Program" Button and wait for the image to be downloaded to the board. | + | :Click the "''Program''" Button and wait for the image to be downloaded to the board. |
:'''NOTE:''' The download will overwrite any previous content of the eMMC memory. | :'''NOTE:''' The download will overwrite any previous content of the eMMC memory. | ||
| − | :Once the download is complete, disconnect the power supply and microUSB cable from the board and change both the SW1 switch pins back to the OFF position. | + | :Once the download is complete, disconnect the power supply and microUSB cable from the board and change both the SW1 switch pins back to the '''OFF '''position. |
:The RSB-4760 is now ready to boot into Windows 10 IoT Core OS. | :The RSB-4760 is now ready to boot into Windows 10 IoT Core OS. | ||
Revision as of 10:16, 18 August 2017
Contents
APQ8016
Currently we do not have a customized Windows 10 IoT Core image for Advantech APQ8016 projects. Fortunately, the image for Dragonboard 410c is also available on our devices, such as RSB-4760. Here, we will show you how to flash the Windows 10 IoT Core image into RSB-4760.
Flash Pre-built Images
Most of the steps below are based on "Get Started" page from Microsoft. You can also refer to it for more details.
Step 1 : Get the tools
- OS requirement
- Microsoft recommends to run Windows 10, but the following steps actually can work on Windows 7. You can choose one of them.
- Download and install the DragonBoard Update Tool
- Download the DragonBoard Update Tool by selecting the download link appropriate for your PC: x86 or x64.
- Extract the zip file and install on your desktop. The installer will create a shortcut to the DragonBoard Update Tool on your desktop and in your start menu, under Qualcomm->DragonBoardUpdate Tool.
- Download the DragonBoard Windows 10 IoT Core Image
- Download Windows 10 IoT Core image from here.
- Double click the downloaded ISO file. This will automatically mount the ISO as a new virtual CD-drive. (Look for a new CD-ROM drive)
- The mounted virtual drive contains an installer file "Windows_10_IoT_Core_for_QCDB410C.msi". Double click the file to start the installation.
- The installer creates a new directory: C:\Program Files\Microsoft IoT\FFU\QCDB410C\ which contains the DragonBoard410c image file "flash.ffu".
Step 2 : Set up your device
- Set up your RSB-4760 device
- First, you have to set the SW1 boot switch to enable download mode.
- Both switch pins are set to ON, and power on the RSB-4760 device.
- Then, connect a USB cable to the micro USB port and connect the other end to an empty USB port on your Host PC.
- Install Windows 10 IoT Core
- Start the DragonBoard Update Tool you installed during the Step 1.
- The Update Tool should detect the board and the Connection Status should show: "Connected".
- In the DragonBoard Update Tool click the "Browse" button and locate the Win10 IoT Core Image file you downloaded during Step 1.
- Click the "Program" Button and wait for the image to be downloaded to the board.
- NOTE: The download will overwrite any previous content of the eMMC memory.
- Once the download is complete, disconnect the power supply and microUSB cable from the board and change both the SW1 switch pins back to the OFF position.
- The RSB-4760 is now ready to boot into Windows 10 IoT Core OS.
- First Boot
- 3
Additional Resources
There are some additional valuable resources for your reference.