Difference between revisions of "EPC-R3220 user guide"
From ESS-WIKI
Jems.cheng (talk | contribs) (→Linux 燒錄方法 (Linux Flash eMMC Method)) |
|||
| (49 intermediate revisions by 3 users not shown) | |||
| Line 1: | Line 1: | ||
| + | |||
| + | = '''產品介紹''' = | ||
| + | |||
== '''資源特性(Features)''' == | == '''資源特性(Features)''' == | ||
| − | *TI Sitara™ AM3352 Cortex®-A8 800MHz processor | + | *TI Sitara™ AM3352 Cortex®-A8 800MHz processor |
| − | *1GB of DDR3-800 and 8 GB of eMMC NAND Flash onboard | + | *1GB of DDR3-800 and 8 GB of eMMC NAND Flash onboard |
| − | *2 Gigabit Ethernet ports | + | *2 Gigabit Ethernet ports |
| − | *2 RS232/485, 1 USB OTG, 6 GPIO | + | *2 RS232/485, 1 USB OTG, 6 GPIO |
| − | *WiFi/BT/LTE solution ready | + | *WiFi/BT/LTE solution ready |
| − | *Yocto Linux support | + | *Yocto Linux support |
| − | *-20 ~ 70 °C operating temperature/ 12~24V DC power supply | + | *-20 ~ 70 °C operating temperature/ 12~24V DC power supply |
| − | *Equipped with hardware watchdog timer for system protection | + | *Equipped with hardware watchdog timer for system protection |
| − | == ''' | + | == '''產品官網連結(Product information Link)'''[[http://ess-wiki.advantech.com.tw/wiki/index.php?title=ROM-5722_user_guide&action=edit§ion=3 edit]] == |
| − | [ | + | [https://www.advantech.com/zh-tw/products/a6f86282-b6ed-4f54-b5b1-cddf3e3ab3cc/epc-r3220/mod_ba26afd3-1706-4172-a93c-3f2c7dc9cc41 '''EPC-R3220'''] |
| − | + | = '''接口布局和尺寸(Layout and Sizes)''' = | |
=== '''EPC-R3220 接口布局圖 Board Dimension Layout ''' === | === '''EPC-R3220 接口布局圖 Board Dimension Layout ''' === | ||
| Line 29: | Line 32: | ||
[[File:EPC-R3220Right2021-10-04 104111.jpg|RTENOTITLE]] | [[File:EPC-R3220Right2021-10-04 104111.jpg|RTENOTITLE]] | ||
| + | |||
| + | | ||
| + | |||
| + | [[File:EPC-R3220 connector Inside2021-10-04 131212.jpg|RTENOTITLE]] | ||
| + | |||
| + | | ||
=== '''接口引脚定義 (Pin definitions)''' === | === '''接口引脚定義 (Pin definitions)''' === | ||
| − | + | *[[串口(Debug_port_、RS-232、RS-485_、GPIO)|串口(Debug port 、RS-232、RS-485 、GPIO)]] | |
| − | *[[串口( | + | *[[LAN接口|LAN接口(LAN)]] |
| − | + | *USB接口(USB1-2、USB-4-5、USB Type C、USB OTG) | |
| − | *[[LAN接口|LAN接口(LAN)]] | + | *[[电源(DC-IN)|电源(DC-IN)]] |
| − | * | + | *MINI_PCIE接口、I2C_接口 |
| − | *[[ | + | *[[SW1(SD启动or_EMMC启动）|SW1(SD启动 or EMMC启动）]] |
| − | *[[ | ||
| − | |||
| − | |||
=== '''机械尺寸 ('''Mechanical Characteristics) === | === '''机械尺寸 ('''Mechanical Characteristics) === | ||
| Line 48: | Line 54: | ||
[[File:EPC-R3220 ME2021-10-04 104559.jpg|RTENOTITLE]] | [[File:EPC-R3220 ME2021-10-04 104559.jpg|RTENOTITLE]] | ||
| + | | ||
| + | | ||
| + | | ||
| + | | ||
| + | ---- | ||
| + | = '''快速入门 (Quick Start)''' = | ||
| + | === '''系统下载 (OS Download)''' === | ||
| + | *'''Linux系统 (Linux OS)'''''' ''' | ||
| − | ---- | + | *[https://pan.baidu.com/s/1JgATr1cvCJ65wWdiR8KY_Q Baidu link for TI Yocto 2.4] Password：bxel |
| + | *[https://www.dropbox.com/sh/orviiqrgee1vbhy/AABhjxgOwZSYhBUK-xudAlXwa?dl=0 Dropbox link for TI Yocto 2.4] | ||
| + | *[https://www.dropbox.com/sh/orviiqrgee1vbhy/AABhjxgOwZSYhBUK-xudAlXwa?dl=0&preview=amxxxx_downloads-2.4.tar.gz Downloads-2.4] | ||
| + | |||
| + | | ||
| + | |||
| + | === Note :L'''B'''V=BSP , L'''I'''V= Image , '''U'''IV=Ubuntu , '''D'''IV = Debian === | ||
| + | |||
| + | {| border="1" cellpadding="0" cellspacing="0" style="width: 1213px;" | ||
| + | |- | ||
| + | | style="width: 121px;" | <p style="text-align: center;">Git BSP Tag Version</p> | ||
| + | | style="width: 103px;" | <p style="text-align: center;">Product</p> | ||
| + | | style="width: 74px;" | <p style="text-align: center;">CPU</p> | ||
| + | | style="width: 11px; text-align: center;" | BSP/Image | ||
| + | | style="width: 87px;" | <p style="text-align: center;">Date</p> | ||
| + | | style="width: 139px;" | <p style="text-align: center;">Alpha Release</p> | ||
| + | | style="width: 86px;" | <p style="text-align: center;">Beta Release</p> | ||
| + | | style="width: 78px;" | <p style="text-align: center;">MP Release</p> | ||
| + | | style="width: 104px;" | <p style="text-align: center;">Release Note</p> | ||
| + | | style="width: 153px;" | <p style="text-align: center;">SDK</p> | ||
| + | | style="width: 166px;" | <p style="text-align: center;">Release Owner</p> | ||
| + | |- | ||
| + | | style="width: 121px;" | am335xDBV20012 | ||
| + | | style="width: 103px;" | EPC-R3220A1 | ||
| + | | style="width: 74px;" | am3352 | ||
| + | | style="width: 11px;" | 2021-07-29 | ||
| + | | style="width: 87px;" | 2021-07-29 | ||
| + | | style="width: 139px;" | | ||
| + | Image:am335xDIV20012 | ||
| − | + | BSP:am335xDBV20012 | |
| − | === '' | + | | style="width: 86px;" | |
| + | | style="width: 78px;" | | ||
| + | | style="width: 104px;" | [[Media:EPC-R3220_Release_Notes_Debian10_V20012.pdf|''<font color="#0066cc">Release Note</font>'']] | ||
| + | | style="width: 153px;" | am335xDBV20012_SDK | ||
| + | | style="width: 166px;" | Zhengguang.Yang | ||
| + | |- | ||
| + | | style="width: 121px;" | am335xUBV20012 | ||
| + | | style="width: 103px;" | EPC-R3220A1 | ||
| + | | style="width: 74px;" | am3352 | ||
| + | | style="width: 11px;" | 2021-07-29 | ||
| + | | style="width: 87px;" | 2021-07-29 | ||
| + | | style="width: 139px;" | | ||
| + | Image:am335xUIV20012 | ||
| − | + | BSP:am335xUBV20012 | |
| − | + | | style="width: 86px;" | | |
| + | | style="width: 78px;" | | ||
| + | | style="width: 104px;" | [[Media:EPC-R3220_Release_Notes_Ubuntu18.04_V20012.pdf|''<font color="#0066cc">Release Note</font>'']] | ||
| + | | style="width: 153px;" | am335xUBV20012_SDK | ||
| + | | style="width: 166px;" | Zhengguang.Yang | ||
|- | |- | ||
| − | | style=" | + | | style="width: 121px;" | am335xLBV20012 |
| − | | style=" | + | | style="width: 103px;" | EPC-R3220A1 |
| − | | style=" | + | | style="width: 74px;" | am3352 |
| − | | style=" | + | | style="width: 11px;" | 2021-07-29 |
| − | | style=" | + | | style="width: 87px;" | 2021-07-29 |
| − | + | | style="width: 139px;" | | |
| − | | style=" | + | Image:am335xLIV20012 |
| − | + | ||
| − | + | BSP:am335xLBV20012 | |
| − | + | ||
| − | + | | style="width: 86px;" | | |
| − | + | | style="width: 78px;" | | |
| − | + | | style="width: 104px;" | [[Media:EPC-R3220_Release_Notes_Yocto2.4_V20012.pdf|''<font color="#0066cc">Release Note</font>'']] | |
| − | + | | style="width: 153px;" | am335xLBV20012_SDK | |
| − | + | | style="width: 166px;" | Zhengguang.Yang | |
| − | | style="width: | ||
| − | | style="width: | ||
| − | | style="width: | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | | | ||
| − | | | ||
| − | |||
| − | |||
|} | |} | ||
| − | + | ||
| − | + | | |
| + | |||
| + | | ||
| + | |||
=== '''Linux 燒錄方法 (Linux Flash eMMC Method)''' === | === '''Linux 燒錄方法 (Linux Flash eMMC Method)''' === | ||
| − | '''使用Flash tool 燒錄鏡像到eMMC (Flash image into eMMC by Flash Tools) ''' | + | '''使用Flash tool 燒錄鏡像到eMMC (Flash image into eMMC by Flash Tools) <u>[Use Ubuntu 18.04 to create SD card (Test the SD image can boot into Linux without problem that created on Ubuntu18.04 or 20.04)]</u>''' |
| + | |||
| + | 解壓縮檔案(Unzip the files) | ||
| + | |||
| + | [[File:EPC-R3220unzip12021-10-04 143828.jpg|RTENOTITLE]] | ||
| + | |||
| + | '''mkdir ti-sdk-XXX(XXX represents numbers, e.g. ti-sdk-001)''' | ||
| + | |||
| + | Command : phill@riscserver-Default-string:/home/RISC_BSP_Home/EPC-R3220/R3220A1AIM20LIV20012_am335x_2021-07-29$ mkdir ti-sdk-001 | ||
| + | |||
| + | '''Unzip file to ti-sdk-001''' | ||
| + | |||
| + | Command : tar -xJf processor-sdk-linux-image-am335xepcr3220a1-20210729031957.tar.xz -C ti-sdk-001 | ||
| + | |||
| + | [[File:EPC-R3220Unzip ti0012021-10-04 151725.jpg|RTENOTITLE]] | ||
Step0: 檢查SD卡在Linux 環境的代號 (check SD card symbol in Linux system) | Step0: 檢查SD卡在Linux 環境的代號 (check SD card symbol in Linux system) | ||
| − | [[File: | + | [[File:EPC-R3220 checkSD2021-10-04 152134.jpg|RTENOTITLE]] |
| − | [[File: | + | [[File:EPC-R3220 checkSD12021-10-04 152201.jpg|RTENOTITLE]] |
Step1: 創造一張可開機的SD 卡 (Create a bootable SD card) | Step1: 創造一張可開機的SD 卡 (Create a bootable SD card) | ||
| − | [[File: | + | $ cd ti-sdk-XXX/bin |
| + | |||
| + | [[File:EPC-R3220 bin2021-10-04 160222.jpg|RTENOTITLE]] | ||
| + | |||
| + | $ sudo ./create-sdcard.sh | ||
| + | |||
| + | [[File:EPC-R3220 createSD2021-10-04 160506.jpg|RTENOTITLE]] | ||
| + | |||
| + | Select SD card: | ||
| + | |||
| + | [[File:EPC-R3220 selectsd2021-10-04 161451.jpg|RTENOTITLE]] | ||
| + | |||
| + | Select number of partitions: | ||
| + | |||
| + | [[File:EPC-R3220 selectSD12021-10-04 161702.jpg|RTENOTITLE]] | ||
| + | |||
| + | [[File:EPC-R3220 selectpartition2021-10-04 161850.jpg|RTENOTITLE]] | ||
| + | |||
| + | [[File:EPC-R3220 continue2021-10-04 162044.jpg|RTENOTITLE]] | ||
| + | |||
| + | Select Pre-built System image: | ||
| + | |||
| + | [[File:EPC-R3220 prebuildsystemimage2021-10-04 162244.jpg|RTENOTITLE]] | ||
| + | |||
| + | Select tisdk-rootfs-image-XXX.tar.xz(XXX represents machine name, e.g. am335xepcr3220a1): | ||
| + | |||
| + | [[File:EPC-R3220 selecttidisk image2021-10-04 162518.jpg|RTENOTITLE]] | ||
| + | |||
| + | [[File:EPC-R3220 selecttidisk image result2021-10-04 162518.jpg|RTENOTITLE]] | ||
| + | |||
| + | If you need to transfer whole system to on-board flash, please press y followed by Enter. | ||
| + | |||
| + | [[File:EPC-R3220 inand2021-10-04 162836.jpg|RTENOTITLE]] | ||
| + | |||
| + | [[File:EPC-R3220 inand result2021-10-04 162836.jpg|RTENOTITLE]] | ||
| + | |||
| + | | ||
Step2: 將可開機的SD 卡插入底板SD卡卡槽(Plug the SD card into Carrier board 's SD card slot) | Step2: 將可開機的SD 卡插入底板SD卡卡槽(Plug the SD card into Carrier board 's SD card slot) | ||
| − | [[File: | + | [[File:EPC-R3220 SD slotpulgin2021-10-07 134342.jpg|RTENOTITLE]] |
| + | |||
| + | Step3: 確認開機選擇指撥開關(Check the SW1 switch) | ||
| − | + | SPL開機模式(SPL boot mode: boot from SD, MMC...) | |
| − | | + | 1--off 2---off |
| − | | + | eMMC開機模式(eMMC boot mode): |
| + | 1--on 2--off | ||
| + | Note: After change switch setting. Unplug and plug AC power for the change to take effect. | ||
Step3:打開電源 和 終端機 (Turn on the Power & Terminal) | Step3:打開電源 和 終端機 (Turn on the Power & Terminal) | ||
| − | [[File: | + | [[File:EPC-R3220 turnonpower2021-10-07 1521111.jpg|RTENOTITLE]] |
| + | [[File:EPC-R3220 Login Yocto2021-10-07 1520041111.jpg|RTENOTITLE]] | ||
| + | | ||
| − | + | | |
| − | | + | Step4: 利用mk-eMMC-boot.sh 安裝eMMC 鏡像(Flash image to eMMC Flash by mk-eMMC-boot.sh ) |
| − | + | [[File:EPC-R3220 mk-eMMC-boot.sh2021-10-07 160353.jpg|RTENOTITLE]] | |
| − | + | [[File:EPC-R3220 mk-eMMC-boot.sh 12021-10-07 160438.jpg|RTENOTITLE]] | |
| − | + | [[File:EPC-R3220 mk-eMMC-boot.sh 22021-10-07 160353.jpg|RTENOTITLE]] | |
| − | + | [[File:EPC-R3220 mk-eMMC-boot.sh 3 22021-10-07 160353.jpg|RTENOTITLE]] | |
| − | + | [[File:EPC-R3220 mk-eMMC-boot.sh 4 12021-10-07 160438.jpg|RTENOTITLE]] | |
| − | + | [[File:EPC-R3220 mk-eMMC-boot.sh 5 12021-10-07 160438.jpg|RTENOTITLE]] | |
| − | | + | [[File:EPC-R3220 mk-eMMC-boot.sh 6 12021-10-07 160438.jpg|RTENOTITLE]] |
| − | + | | |
| | ||
| Line 162: | Line 267: | ||
Flow Control流控：无</pre> | Flow Control流控：无</pre> | ||
| − | : | + | : |
Tera Term Tool | Tera Term Tool | ||
| Line 178: | Line 283: | ||
Debug port connection (串口連接) | Debug port connection (串口連接) | ||
| − | [[File: | + | [[File:EPC-R3220 turnonpower2021-10-07 152136.jpg|RTENOTITLE]] |
| − | |||
| + | | ||
Log into Terminal Tool (进入串口调试终端)： | Log into Terminal Tool (进入串口调试终端)： | ||
| − | [[File: | + | [[File:EPC-R3220 Login Yocto2021-10-07 1520041111.jpg|RTENOTITLE]] |
---- | ---- | ||
| − | + | = '''Linux系统的基本使用(Linux System Basic Operating Method)''' = | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
=== '''乙太網路使用方法(Ethernent Testing Method)''' === | === '''乙太網路使用方法(Ethernent Testing Method)''' === | ||
| Line 218: | Line 299: | ||
'''Command : ifconfig ''' | '''Command : ifconfig ''' | ||
| − | + | [[File:EPC-R3220 ethnet ifconfig 2022-01-07 162824.jpg|RTENOTITLE]] | |
'''Command: Ping - I eth1 8.8.8.8 or Ping - I eth0 8.8.8.8 ''' | '''Command: Ping - I eth1 8.8.8.8 or Ping - I eth0 8.8.8.8 ''' | ||
| − | + | [[File:EPC-R3220 ethernet ping 2022-01-07 163028.jpg|RTENOTITLE]] | |
=== '''WiFi使用方法(WIFI Testing Method)''' === | === '''WiFi使用方法(WIFI Testing Method)''' === | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| + | '''M.2 Mrvl. WIFI/BT Test<br/> EPC-R3220 supports MarverllSD8897 wifi/bt modules throught M.2.''' | ||
| + | <div>[[File:EPC-R3220 wifi m.2 2021-10-07 164711.jpg|RTENOTITLE]]</div> | ||
=== '''4G使用方法(4G Testing Method)''' === | === '''4G使用方法(4G Testing Method)''' === | ||
| − | < | + | <div>Script : [[4G_ppp_EPC-R3220.7z|4G_ppp.sh ]]</div> <div> [[4G_rndis_EPC-R3220.7z|4G_rndis.sh ]]</div> <div>SOP: [[EIOT-_EPC-R3220_EWM-C117_auto_run_script_.docx|Test EWM-C117 with EPC-R3220]]</div> |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | </ | ||
| − | |||
| − | [[ | ||
| − | |||
| − | [[ | ||
| − | |||
=== '''GPIO使用方法(GPIO Operating Method)''' === | === '''GPIO使用方法(GPIO Operating Method)''' === | ||
| − | [[File: | + | [[File:EPC-R3220 GPIO Test2021-10-07 165814.jpg|RTENOTITLE]] |
| + | [[File:EPC-R3220 GPIO Test 1 2021-10-07 170203.jpg|RTENOTITLE]] | ||
| − | + | | |
| − | + | <div> </div> | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
=== '''串口使用方法(Serial Port Operating Method)''' === | === '''串口使用方法(Serial Port Operating Method)''' === | ||
RS-232 Test | RS-232 Test | ||
| − | + | [[File:EPC-R3220 RS-232 Test2021-10-07 170819.jpg|RTENOTITLE]] | |
| − | |||
| − | [[File: | ||
=== '''蓝牙使用方法(BlueTooth Operating Method)''' === | === '''蓝牙使用方法(BlueTooth Operating Method)''' === | ||
| Line 311: | Line 345: | ||
<pre> Command : ifconfig</pre> | <pre> Command : ifconfig</pre> | ||
| − | [[File: | + | [[File:EPC-R3220 ifconfig ssh 2021-10-07 171106.jpg|RTENOTITLE]] |
==== Windows下SSH访问及文件传输 ==== | ==== Windows下SSH访问及文件传输 ==== | ||
| Line 317: | Line 351: | ||
SSH Remote Log into Device | SSH Remote Log into Device | ||
| − | *SSH远程登录,以putty选择putty.exe(或者使用Xshell、SecureCRT等类似软件) | + | *SSH远程登录,以putty选择putty.exe(或者使用Xshell、SecureCRT等类似软件) |
| − | *需要设置远程设备的IP、通讯端口(默认22)、通讯方式，登录后验证用户名密码 | + | *需要设置远程设备的IP、通讯端口(默认22)、通讯方式，登录后验证用户名密码 |
| + | |||
| + | | ||
| + | [[File:SSHsettingdetail.png|RTENOTITLE]] | ||
| + | [[File:EPC-R3220 ifconfig ssh 1 2021-10-07 171607.jpg|RTENOTITLE]] | ||
| − | [[File: | + | |
| + | |||
| + | [[File:Sshsetting12021-09-10 143743n.jpg|RTENOTITLE]] | ||
| + | |||
| + | Account is “root” , no password. | ||
| + | |||
| + | [[File:EPC-R3220 ifconfig ssh 2 2021-10-07 171807.jpg|RTENOTITLE]] | ||
| + | |||
| + | | ||
| + | |||
| + | === '''RS-485 測試方式 (RS-485 testing method) ''' === | ||
| + | |||
| + | '''Test tool script : ''' | ||
| + | |||
| + | '''Uart change mode''' | ||
| + | |||
| + | 百度網盤(Baidu Disk): '''链接：[https://pan.baidu.com/s/1HGJoW0jqp_GGK5VFvXAieg   https://pan.baidu.com/s/1HGJoW0jqp_GGK5VFvXAieg  ];<br/> 提取码：luug ''' | ||
| − | [[File: | + | '''[[File:EPC-R3220 RS485-1 2021-11-17 094556.jpg|RTENOTITLE]]''' |
| + | [[File:EPC-R3220 485-2 2021-11-17 094837.jpg|RTENOTITLE]] | ||
| + | [[File:EPC-R3220 485-3 2021-11-17 094945.jpg|RTENOTITLE]] | ||
| − | + | | |
| − | + | | |
| − | + | [[File:EPC-R3220 485-4 2021-11-17 095024.jpg|RTENOTITLE]] | |
| − | + | [[File:EPC-R3220 485-5 2021-11-17 095024.jpg|RTENOTITLE]] | |
| − | |||
| − | + | = '''通用方法(General Method)''' = | |
| − | === ''' | + | === ''' '''''' 查看CPU频率(Check CPU Frequency)''' === |
| − | <pre> cat /sys/devices/system/cpu/ | + | <pre> root@am335xepcr3220a1:/# cat /sys/devices/system/cpu/cpufreq/policy0/cpuinfo_cur_freq |
| − | >> | + | >> 600000 |
| − | cat /sys/devices/system/cpu/ | + | root@am335xepcr3220a1:/# cat /sys/devices/system/cpu/cpufreq/policy0/cpuinfo_max_freq |
| − | >> | + | >> 800000</pre> |
=== ''' 查看内存容量(Check Memory Capacity)''' === | === ''' 查看内存容量(Check Memory Capacity)''' === | ||
| − | <pre>root@ | + | <pre>root@am335xepcr3220a1:~# busybox free -m[ 143.716190] NET: Registered protocol family 15 |
| − | + | ||
| − | Mem: | + | total used free shared buffers cached |
| − | -/+ buffers/cache: | + | Mem: 1002 152 849 9 23 88 |
| − | Swap: | + | -/+ buffers/cache: 40 961 |
| + | Swap: 0 0 0 | ||
</pre> | </pre> | ||
=== ''' 查看存储容量(Check Storage Capacity)''' === | === ''' 查看存储容量(Check Storage Capacity)''' === | ||
| − | <pre style="margin-left: 40px;">root@ | + | <pre style="margin-left: 40px;">root@am335xepcr3220a1:~# busybox df -h |
| − | Filesystem | + | Filesystem Size Used Available Use% Mounted on |
| − | /dev/root | + | /dev/root 6.1G 2.2G 3.5G 39% / |
| − | devtmpfs | + | devtmpfs 476.7M 4.0K 476.7M 0% /dev |
| − | tmpfs | + | tmpfs 501.2M 0 501.2M 0% /dev/shm |
| − | tmpfs | + | tmpfs 501.2M 9.6M 491.6M 2% /run |
| − | tmpfs | + | tmpfs 501.2M 0 501.2M 0% /sys/fs/cgroup |
| − | tmpfs | + | tmpfs 501.2M 0 501.2M 0% /tmp |
| − | tmpfs | + | tmpfs 16.0M 0 16.0M 0% /media/ram |
| − | /dev/ | + | tmpfs 50.0M 128.0K 49.9M 0% /var/volatile |
| − | /dev/ | + | /dev/mmcblk1p3 58.0M 31.1M 23.7M 57% /run/media/mmcblk1p3 |
| − | /dev/mmcblk1p1 | + | /dev/mmcblk1p6 739.9M 796.0K 700.7M 0% /cache |
| − | tmpfs | + | /dev/mmcblk1p5 2.9M 34.0K 2.6M 1% /run/media/mmcblk1p5 |
| − | + | /dev/mmcblk1p1 68.9M 472.5K 68.4M 1% /run/media/mmcblk1p1 | |
| + | tmpfs 100.2M 0 100.2M 0% /run/user/0</pre> | ||
=== ''' 網路Ping測試(Ping Network Testing)''' === | === ''' 網路Ping測試(Ping Network Testing)''' === | ||
| Line 376: | Line 433: | ||
=== ''' 設置RTC (RTC Setting) ''' === | === ''' 設置RTC (RTC Setting) ''' === | ||
| − | <pre> | + | <pre>root@am335xepcr3220a1:~# date 101212102021 && hwclock -w && date |
| − | + | Tue Oct 12 12:10:00 UTC 2021 | |
| − | + | Tue Oct 12 05:52:57 UTC 2021 | |
| − | + | root@am335xepcr3220a1:~# date | |
| − | + | Tue Oct 12 05:52:58 UTC 2021 | |
| − | + | root@am335xepcr3220a1:~#</pre> | |
| − | |||
''' ''' | ''' ''' | ||
| − | + | = '''Linux BSP編譯方法(Yocto BSP Compile Method)''' = | |
| − | === [http://ess-wiki.advantech.com.tw/view/ | + | === [http://ess-wiki.advantech.com.tw/view/Yocto_Linux_BSP_Ver.4_User_Guide_for_AM57xx/AM335x_series '''EPC-R3220_Yocto 2.4'''] === |
| + | |||
| + | '''SDK使用方法(SDK Build Reference)''' | ||
| + | |||
| + | {| border="0" cellpadding="10" cellspacing="0" style="width:100%;" | ||
| + | |- | ||
| + | | <iframe height="230" key="advonline" level="campaign" path="en/aim-linux_community/" width="100%"></iframe> | ||
| + | |} | ||
Latest revision as of 09:51, 30 May 2024
Contents
- 1 產品介紹
- 2 接口布局和尺寸(Layout and Sizes)
- 3 快速入门 (Quick Start)
- 4 Linux系统的基本使用(Linux System Basic Operating Method)
- 4.1 乙太網路使用方法(Ethernent Testing Method)
- 4.2 WiFi使用方法(WIFI Testing Method)
- 4.3 4G使用方法(4G Testing Method)
- 4.4 GPIO使用方法(GPIO Operating Method)
- 4.5 串口使用方法(Serial Port Operating Method)
- 4.6 蓝牙使用方法(BlueTooth Operating Method)
- 4.7 遠程訪問及文件傳輸(Remote Access and File Transimmion)
- 4.8 RS-485 測試方式 (RS-485 testing method)
- 5 通用方法(General Method)
- 6 Linux BSP編譯方法(Yocto BSP Compile Method)
產品介紹
資源特性(Features)
- TI Sitara™ AM3352 Cortex®-A8 800MHz processor
- 1GB of DDR3-800 and 8 GB of eMMC NAND Flash onboard
- 2 Gigabit Ethernet ports
- 2 RS232/485, 1 USB OTG, 6 GPIO
- WiFi/BT/LTE solution ready
- Yocto Linux support
- -20 ~ 70 °C operating temperature/ 12~24V DC power supply
- Equipped with hardware watchdog timer for system protection
產品官網連結(Product information Link)[edit]
接口布局和尺寸(Layout and Sizes)
EPC-R3220 接口布局圖 Board Dimension Layout
Front I/O
Left-Side
Right-Side
接口引脚定義 (Pin definitions)
- 串口(Debug port 、RS-232、RS-485 、GPIO)
- LAN接口(LAN)
- USB接口(USB1-2、USB-4-5、USB Type C、USB OTG)
- 电源(DC-IN)
- MINI_PCIE接口、I2C_接口
- SW1(SD启动 or EMMC启动）
机械尺寸 (Mechanical Characteristics)
EPC-R3220
快速入门 (Quick Start)
系统下载 (OS Download)
- 'Linux系统 (Linux OS)'
Note :LBV=BSP , LIV= Image , UIV=Ubuntu , DIV = Debian
| Git BSP Tag Version |
Product |
CPU |
BSP/Image | Date |
Alpha Release |
Beta Release |
MP Release |
Release Note |
SDK |
Release Owner |
| am335xDBV20012 | EPC-R3220A1 | am3352 | 2021-07-29 | 2021-07-29 |
Image:am335xDIV20012 BSP:am335xDBV20012 |
Release Note | am335xDBV20012_SDK | Zhengguang.Yang | ||
| am335xUBV20012 | EPC-R3220A1 | am3352 | 2021-07-29 | 2021-07-29 |
Image:am335xUIV20012 BSP:am335xUBV20012 |
Release Note | am335xUBV20012_SDK | Zhengguang.Yang | ||
| am335xLBV20012 | EPC-R3220A1 | am3352 | 2021-07-29 | 2021-07-29 |
Image:am335xLIV20012 BSP:am335xLBV20012 |
Release Note | am335xLBV20012_SDK | Zhengguang.Yang |
Linux 燒錄方法 (Linux Flash eMMC Method)
使用Flash tool 燒錄鏡像到eMMC (Flash image into eMMC by Flash Tools) [Use Ubuntu 18.04 to create SD card (Test the SD image can boot into Linux without problem that created on Ubuntu18.04 or 20.04)]
解壓縮檔案(Unzip the files)
mkdir ti-sdk-XXX(XXX represents numbers, e.g. ti-sdk-001)
Command : phill@riscserver-Default-string:/home/RISC_BSP_Home/EPC-R3220/R3220A1AIM20LIV20012_am335x_2021-07-29$ mkdir ti-sdk-001
Unzip file to ti-sdk-001
Command : tar -xJf processor-sdk-linux-image-am335xepcr3220a1-20210729031957.tar.xz -C ti-sdk-001
Step0: 檢查SD卡在Linux 環境的代號 (check SD card symbol in Linux system)
Step1: 創造一張可開機的SD 卡 (Create a bootable SD card)
$ cd ti-sdk-XXX/bin
$ sudo ./create-sdcard.sh
Select SD card:
Select number of partitions:
Select Pre-built System image:
Select tisdk-rootfs-image-XXX.tar.xz(XXX represents machine name, e.g. am335xepcr3220a1):
If you need to transfer whole system to on-board flash, please press y followed by Enter.
Step2: 將可開機的SD 卡插入底板SD卡卡槽(Plug the SD card into Carrier board 's SD card slot)
Step3: 確認開機選擇指撥開關(Check the SW1 switch)
SPL開機模式(SPL boot mode: boot from SD, MMC...)
1--off 2---off
eMMC開機模式(eMMC boot mode):
1--on 2--off
Note: After change switch setting. Unplug and plug AC power for the change to take effect.
Step3:打開電源 和 終端機 (Turn on the Power & Terminal)
Step4: 利用mk-eMMC-boot.sh 安裝eMMC 鏡像(Flash image to eMMC Flash by mk-eMMC-boot.sh )
Debug 串口調試 (Debug port Setting)
以 Tera Term 为例介绍如何使用串口调试功能
Baud Rate波特率：115200 Data 数据位：8 Parity 奇偶校验：无 Stop 停止位：1 Flow Control流控：无
Tera Term Tool
Check the Sriel port in Device Manager (查看PC端的串口号)：
if you can not identify the Serial device , please check your serial driver.
Debug port connection (串口連接)
Log into Terminal Tool (进入串口调试终端)：
Linux系统的基本使用(Linux System Basic Operating Method)
乙太網路使用方法(Ethernent Testing Method)
Command : ifconfig
Command: Ping - I eth1 8.8.8.8 or Ping - I eth0 8.8.8.8
WiFi使用方法(WIFI Testing Method)
M.2 Mrvl. WIFI/BT Test
EPC-R3220 supports MarverllSD8897 wifi/bt modules throught M.2.
4G使用方法(4G Testing Method)
Script : 4G_ppp.sh
GPIO使用方法(GPIO Operating Method)
串口使用方法(Serial Port Operating Method)
RS-232 Test
蓝牙使用方法(BlueTooth Operating Method)
Command : $ hciconfig hci0 up $ bluetoothctl $ discoverable on $ pairable on $ scan on [NEW] FC:18:3C:8D:75:F4 myphone $ scan off $ pair FC:18:3C:8D:75:F4 $ connect FC:18:3C:8D:75:F4
遠程訪問及文件傳輸(Remote Access and File Transimmion)
查看主板IP位址 ( Chech IP Address )：
Command : ifconfig
Windows下SSH访问及文件传输
SSH Remote Log into Device
- SSH远程登录,以putty选择putty.exe(或者使用Xshell、SecureCRT等类似软件)
- 需要设置远程设备的IP、通讯端口(默认22)、通讯方式，登录后验证用户名密码
Account is “root” , no password.
RS-485 測試方式 (RS-485 testing method)
Test tool script :
Uart change mode
百度網盤(Baidu Disk): 链接：  https://pan.baidu.com/s/1HGJoW0jqp_GGK5VFvXAieg
提取码：luug
通用方法(General Method)
' 查看CPU频率(Check CPU Frequency)'
root@am335xepcr3220a1:/# cat /sys/devices/system/cpu/cpufreq/policy0/cpuinfo_cur_freq
>> 600000
root@am335xepcr3220a1:/# cat /sys/devices/system/cpu/cpufreq/policy0/cpuinfo_max_freq
>> 800000
查看内存容量(Check Memory Capacity)
root@am335xepcr3220a1:~# busybox free -m[ 143.716190] NET: Registered protocol family 15 total used free shared buffers cached Mem: 1002 152 849 9 23 88 -/+ buffers/cache: 40 961 Swap: 0 0 0
查看存储容量(Check Storage Capacity)
root@am335xepcr3220a1:~# busybox df -h Filesystem Size Used Available Use% Mounted on /dev/root 6.1G 2.2G 3.5G 39% / devtmpfs 476.7M 4.0K 476.7M 0% /dev tmpfs 501.2M 0 501.2M 0% /dev/shm tmpfs 501.2M 9.6M 491.6M 2% /run tmpfs 501.2M 0 501.2M 0% /sys/fs/cgroup tmpfs 501.2M 0 501.2M 0% /tmp tmpfs 16.0M 0 16.0M 0% /media/ram tmpfs 50.0M 128.0K 49.9M 0% /var/volatile /dev/mmcblk1p3 58.0M 31.1M 23.7M 57% /run/media/mmcblk1p3 /dev/mmcblk1p6 739.9M 796.0K 700.7M 0% /cache /dev/mmcblk1p5 2.9M 34.0K 2.6M 1% /run/media/mmcblk1p5 /dev/mmcblk1p1 68.9M 472.5K 68.4M 1% /run/media/mmcblk1p1 tmpfs 100.2M 0 100.2M 0% /run/user/0
網路Ping測試(Ping Network Testing)
ping 8.8.8.8
PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
64 bytes from 8.8.8.8: icmp_seq=1 ttl=54 time=2.10 ms
64 bytes from 8.8.8.8: icmp_seq=2 ttl=54 time=2.10 ms
設置RTC (RTC Setting)
root@am335xepcr3220a1:~# date 101212102021 && hwclock -w && date Tue Oct 12 12:10:00 UTC 2021 Tue Oct 12 05:52:57 UTC 2021 root@am335xepcr3220a1:~# date Tue Oct 12 05:52:58 UTC 2021 root@am335xepcr3220a1:~#
Linux BSP編譯方法(Yocto BSP Compile Method)
EPC-R3220_Yocto 2.4
SDK使用方法(SDK Build Reference)