Difference between revisions of "串口（RS232 DB,RS232/485,Internal RS232）"
From ESS-WIKI
Jems.cheng (talk | contribs) (→RS232/485 (COM4)) |
|||
| (2 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
=== '''RS232/Debug Port (COM2)''' === | === '''RS232/Debug Port (COM2)''' === | ||
| − | '''RSB-4680 can communicate with a host server (Windows or Linux) by using debug cable''' | + | '''RSB-4680 can communicate with a host server (Windows or Linux) by using debug cable'''[[File:Debug port.PNG|RTENOTITLE]] |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
=== '''RS232/485 (COM4)''' === | === '''RS232/485 (COM4)''' === | ||
| Line 27: | Line 8: | ||
'''RSB-4680 provides one D-Sub 9-pin connector serial communication interface port. The port can support RS-232/485 mode communication.''' | '''RSB-4680 provides one D-Sub 9-pin connector serial communication interface port. The port can support RS-232/485 mode communication.''' | ||
| − | {| border="1" | + | {| border="1" cellpadding="1" cellspacing="1" style="width:500px;" |
|- | |- | ||
| style="width: 113px;" | '''Pin''' | | style="width: 113px;" | '''Pin''' | ||
| Line 33: | Line 14: | ||
|- | |- | ||
| style="width: 113px;" | 1 | | style="width: 113px;" | 1 | ||
| − | | style="width: 373px;" | COM4_DCD_a | + | | style="width: 373px;" | COM4_DCD_a/(UART4_TXD485#) |
|- | |- | ||
| style="width: 113px;" | 2 | | style="width: 113px;" | 2 | ||
| − | | style="width: 373px;" | COM4_RX_a | + | | style="width: 373px;" | COM4_RX_a/(UART4_TXD_485P) |
|- | |- | ||
| style="width: 113px;" | 3 | | style="width: 113px;" | 3 | ||
| − | | style="width: 373px;" | COM4_TX_a | + | | style="width: 373px;" | COM4_TX_a |
|- | |- | ||
| style="width: 113px;" | 4 | | style="width: 113px;" | 4 | ||
| Line 51: | Line 32: | ||
|- | |- | ||
| style="width: 113px;" | 7 | | style="width: 113px;" | 7 | ||
| − | | style="width: 373px;" | COM4_RTS | + | | style="width: 373px;" | COM4_RTS |
|- | |- | ||
| style="width: 113px;" | 8 | | style="width: 113px;" | 8 | ||
| − | | style="width: 373px;" | COM4_CTS | + | | style="width: 373px;" | COM4_CTS |
|- | |- | ||
| style="width: 113px;" | 9 | | style="width: 113px;" | 9 | ||
| Line 60: | Line 41: | ||
|} | |} | ||
| − | [[File:COM Port.PNG]] | + | [[File:COM Port.PNG|RTENOTITLE]] |
=== '''Internal RS232 (COM)''' === | === '''Internal RS232 (COM)''' === | ||
| Line 156: | Line 137: | ||
|} | |} | ||
| − | + | [[File:Internal RS232 header2.PNG]] | |
Latest revision as of 04:55, 22 September 2022
Contents
RS232/Debug Port (COM2)
RSB-4680 can communicate with a host server (Windows or Linux) by using debug cable
RS232/485 (COM4)
RSB-4680 provides one D-Sub 9-pin connector serial communication interface port. The port can support RS-232/485 mode communication.
| Pin | Description |
| 1 | COM4_DCD_a/(UART4_TXD485#) |
| 2 | COM4_RX_a/(UART4_TXD_485P) |
| 3 | COM4_TX_a |
| 4 | NC |
| 5 | GND |
| 6 | NC |
| 7 | COM4_RTS |
| 8 | COM4_CTS |
| 9 | NC |
Internal RS232 (COM)
RSB-4680 provides 2 x internal 4 wires RS-232 ports with 5V/12V selection. (Refer to Jumper CN6).
| Pin | Description |
| 1 | COM6_TXD |
| 2 | COM6_RXD |
| 3 | COM6_RTS# |
| 4 | COM6_CTS# |
| 5 | COM6_PWR |
| 6 | GND |
| 7 | GND |
| 8 | COM7_PWR |
| 9 | COM7_CTS# |
| 10 | COM7_RTS# |
| 11 | COM7_RXD |
| 12 | COM7_TXD |
Internal RS232 (COM13)
RSB-4680 provides 2 x internal 4 wires RS-232 ports.
| Pin | Description |
| 1 | COM1_TXD |
| 2 | COM1_RXD |
| 3 | COM1_RTS# |
| 4 | COM1_CTS# |
| 5 | NC |
| 6 | GND |
| 7 | GND |
| 8 | NC |
| 9 | COM3_CTS# |
| 10 | COM3_RTS# |
| 11 | COM3_RXD |
| 12 | COM3_TXD |
