Difference between revisions of "ROM-5880 user guide"

From ESS-WIKI
Jump to: navigation, search
 
(77 intermediate revisions by the same user not shown)
Line 1: Line 1:
  
−
== '''資源特性(Features)''' ==
+
 
 +
 
 +
== '''产品特性(Features)''' ==
  
 
*Rockchip RK3568 Arm Quad Cortex-A55 up to 2.0GHz  
 
*Rockchip RK3568 Arm Quad Cortex-A55 up to 2.0GHz  
 
*Onboard 2/4GB LPDDR4 memory and 16/32GB eMMC  
 
*Onboard 2/4GB LPDDR4 memory and 16/32GB eMMC  
−
*Support 1 x HDMI2.0 4K, 1 x signal LVDS or 1 x 2ch MIPI DSI or 1 x eDP
+
*Support 1 x HDMI2.0 4K, 1 x signal LVDS or 1 x MIPI DSI 
 
*Support 4K H.264/H.265 Video decoder  
 
*Support 4K H.264/H.265 Video decoder  
 
*2 x USB3.0, 2 x USB2.0, 4 x UART, 14 x GPIO  
 
*2 x USB3.0, 2 x USB2.0, 4 x UART, 14 x GPIO  
Line 10: Line 12:
 
*Support Linux & Android  
 
*Support Linux & Android  
  
−
== '''簡介（Introduction）''' ==
+
=== '''产品官网链接（Product official website link）''' ===
−
 
 
−
Advantech ROM-5880 SMARC 2.1 Computer-on-Module is powered by Rockchip RK3568 SOC which includes Quad-core Arm Cortex-A55 processors and Arm Mali-G52 3D graphics<br/> engine. It provides rich display interface: HDMI 4K@60Hz, LVDS or DSI or eDP to meet different requirement. It also features USB3.0, PCIe 3.0, SATA, Gigabit Ethernet, MIPI-CSI for<br/> embedded applications. It is the ideal solution for POS, vending, infotainment, Medical.<br/> ROM-5880 is paired with the Advantech SOM-DB2510 SMARC2.1 development board for faster end product peripheral integration and time-to-market. The reference schematics and<br/> layout checklist documentations for carrier board development will be provided along with the open-sourced Linux BSP, test utilities, hardware design utilities and reference drivers.
 
−
 
 
−
 
 
−
== '''訂購資訊(Ordering Information)''' ==
 
−
 
 
−
[[File:ROM-5880 Ordering Information.png]]
 
−
 
 
−
 
 
−
== '''規格（Specifications）''' ==
 
−
 
 
−
[[File:ROM-5880 Specifications.png]]
 
  
−
== '''框圖（Block Diagram）''' ==
+
[https://www.advantech.com.cn/zh-cn/products/77b59009-31a9-4751-bee1-45827a844421/rom-5880/mod_e0d210fc-532a-4075-896f-0b80c13380fc ROM-5880 - 基于瑞芯微RK3568平台的SMARC2.1核心模块 - 研华 (advantech.com.cn)]
  
−
&nbsp;
+
== '''接口布局和尺寸（Layout and Sizes）''' ==
  
−
== '''接口布局和尺寸(Layout and Sizes)''' ==
+
=== '''ROM-5880接口布局图 Board Dimension Layout''' ===
  
−
=== '''ROM-5880 Connector Location''' ===
+
[[File:ROM-5880 Connector Location.png|RTENOTITLE]]
−
 
 
−
&nbsp;
 
  
 
=== '''Connector List''' ===
 
=== '''Connector List''' ===
Line 72: Line 60:
 
|}
 
|}
  
−
插一张AT/ATX mode图片
+
[[File:ROM-5880 AT ATX mode.png|RTENOTITLE]]
  
−
=== '''SOM-DB2510 A1 接口布局圖 Board Dimension Layout''' ===
+
=== '''SOM-DB2510 A1 Board Dimension Layout''' ===
  
−
The figures below indicate the main chips on SOM-DB2510 Development Board for<br/> SMARC 2.1.
+
The figures below indicate the main chips on SOM-DB2510 Development Board for&nbsp; SMARC 2.1.
  
−
<span style="color:#ff3300;">插一张SOM-DB2510底板的图片</span>
+
[[File:SOM-DB2510.PNG|RTENOTITLE]]
  
 
=== '''SOM-DB2510 Connectors and Jumper Settings''' ===
 
=== '''SOM-DB2510 Connectors and Jumper Settings''' ===
Line 84: Line 72:
 
'''Connector Locations'''
 
'''Connector Locations'''
  
−
插两张图片
+
[[File:SOM-DB2510 Connector Locations.png|RTENOTITLE]]
  
−
'''Jumper Locations'''
+
[[File:SOM-DB2510 Connect Locations 1.png|RTENOTITLE]]
−
 
 
−
插两张图片
 
  
 
'''Switch Locations'''
 
'''Switch Locations'''
  
−
插一张图片
+
[[File:SOM-DB2510 Switch Locations.png|RTENOTITLE]]
  
 
'''I/O Connctor Locations'''
 
'''I/O Connctor Locations'''
  
−
插一张图片
+
[[File:SOM-DB2510 IO Connector Locations.png|RTENOTITLE]]
  
 
'''Button Locations'''
 
'''Button Locations'''
  
−
插一张图片
+
[[File:SOM-DB2510 Button Locations.png|RTENOTITLE]]
  
 
'''LED Locations'''
 
'''LED Locations'''
  
−
插一张图片
+
[[File:SOM-DB2510 LED Locations.png|RTENOTITLE]]
  
 +
{| border="1" cellpadding="1" cellspacing="1"
 +
|-
 +
| '''Label'''
 +
| '''Function'''
 +
| '''Label'''
 +
| '''Function'''
 +
|-
 +
| ATX1
 +
| ATX Connector
 +
| FAN1
 +
| Smart Fan Connector
 +
|-
 +
| SMARC_IN1
 +
| Wide Range Input Power Connector (3V~5.25V)
 +
| FAN2
 +
| System Fan Connector
 +
|-
 +
| DCIN1
 +
| DCIN connector
 +
| CAN0_1
 +
| CAN Bus Connector
 +
|-
 +
| DP0_HDMI
 +
| DP & HDMI Connector
 +
| USB0
 +
| USB OTG Connector
 +
|-
 +
| USB12
 +
| USB 2.0 port1~2 & USB 3.0 port0 Connector
 +
| COM1_3
 +
| COM Port Port1,3 Connector
 +
|-
 +
| TYPEC_DP1
 +
| Type-C Connector
 +
| COM2_4
 +
| COM Port Port2,4 Connector
 +
|-
 +
| LAN0_LAN1
 +
| LAN0 & LAN1 Connector
 +
| CN8
 +
| I2C connector for I2C_PM
 +
|-
 +
| LOUT1
 +
| Line Out Connector
 +
| CN7
 +
| I2C Connector for I2C_GP
 +
|-
 +
| MIC1
 +
| MIC1&nbsp;Connector
 +
| CN10
 +
| eSPI Pin Header
 +
|-
 +
| CN1_MXM1
 +
| SMARC Connector
 +
| SATAP1
 +
| SATA Power Connector
 +
|-
 +
| PCIEA-X4
 +
| PCIe x4 Connector
 +
| CSI0_B2B
 +
| MIPI B2B Connector for 2M Camera
 +
|-
 +
| SATA1
 +
| SATA Port0 Connector
 +
| CSI1_B2B
 +
| MIPI B2B Connector for 8M & 13M Camera
 +
|-
 +
| PCIED-X1
 +
| PCIe x1 Connector
 +
| SPI_BIOS1
 +
| Carrier Board BIOS Socket (SOIC)
 +
|-
 +
| M2
 +
| M.2 Key-E Connector
 +
| BAT1
 +
| Coin battery holder
 +
|-
 +
| MPCIE_C
 +
| Mini PCIe Connector
 +
| BAT2
 +
| Smart battery Connector
 +
|-
 +
| SIM
 +
| SIM card Connector
 +
| LINEOUT_1
 +
| I2S Headphone Connector
 +
|-
 +
| LVDS1
 +
| LVDS1 Connector
 +
| MIC_1
 +
| I2S MIC In Connector
 +
|-
 +
| LVDS0
 +
| LVDS0 Connector
 +
| CSI1_FPC
 +
| MIPI FPC Connector for 8M & 13M Camera
 +
|-
 +
| LVDS1_INVERTER
 +
| LVDS1 Invertor Connector
 +
| CSI0_FPC
 +
| MIPI FPC Connector for 2M Camera
 +
|-
 +
| LVDS0_INVERTER
 +
| LVDS0 Invertor Connector
 +
| CN5
 +
| I2S2 Connector
 +
|-
 +
| SPI_BIOS2
 +
| Carrier Board BIOS Socket (QFN)
 +
| CN17
 +
| I2S0 Connector
 +
|-
 +
| SD
 +
| SD Card Connector
 +
| &nbsp;
 +
| &nbsp;
 +
|}
  
−
== '''接口引脚定義 (Pin definitions)''' ==
+
'''Jumper Locations'''
  
−
'''Connector List'''
+
[[File:SOM DB2510 Jumper Locations.png|RTENOTITLE]]
  
−
'''插一张图片'''
+
[[File:SOM-DB2510 Jumper Locations1.png|RTENOTITLE]]
  
−
=== '''Jumper，Switch，and Button List''' ===
+
{| border="1" cellpadding="1" cellspacing="1"
 +
|-
 +
| Lable
 +
| Function
 +
| Lable
 +
| Function
 +
|-
 +
| BTN3
 +
| Sleep Button
 +
| J14
 +
| EDP1/LVDS1 Hot-Plug Detect Selection Header
 +
|-
 +
| BTN1
 +
| Power Button
 +
| J56
 +
| Standby Voltage Control Header
 +
|-
 +
| BTN2
 +
| Reset Button
 +
| J44
 +
| Module +3.3V/+5V Power Selection Header
 +
|-
 +
| SW4
 +
| BOOT SELECT Switch
 +
| PSON1
 +
| AT/ATX Selection Header
 +
|-
 +
| LID1
 +
| LID Switch
 +
| SPI_CN1
 +
| SPI Header
 +
|-
 +
| J30
 +
| Enable Battery Low# Header
 +
| CN14
 +
| For CAN Bus port0 Terminal Resistor
 +
|-
 +
| M2E_DISABLE_N1
 +
| M.2 Wireless Disable
 +
| CN15
 +
| For CAN Bus port1 Terminal Resistor
 +
|-
 +
| J29
 +
| SMB Alert Enable Header
 +
| J3/J4
 +
| DP0 EQ0 Selection
 +
|-
 +
| CN9
 +
| Header For GPIO Test
 +
| J5/J6
 +
| DP0 EQ1 Selection
 +
|-
 +
| J7/J8
 +
| LVDS0 Power Selection Header
 +
| J58
 +
| PCIE_B_CKREQ# Selection
 +
|-
 +
| J11/J12
 +
| LVDS1 Power Selection Header
 +
| J59
 +
| PCIE_A_CKREQ# Selection
 +
|-
 +
| J9
 +
| LVDS0 Inverter Power Selection Heade
 +
| GPIO_0
 +
| GPIO0/CAM0_PWR# Selection
 +
|-
 +
| J10
 +
| EDP0/LVDS0 Hot-Plug Detect Selection Header
 +
| GPIO_1
 +
| GPIO1/CAM1_PWR# Selection
 +
|-
 +
| J26
 +
| HDA/I2S Selection Header
 +
| GPIO_2
 +
| GPIO2/CAM0_RST# Selection
 +
|-
 +
| J1
 +
| DP1/HDMI1 Select
 +
| GPIO_3
 +
| GPIO3/CAM1_RST# Selection
 +
|-
 +
| J13
 +
| LVDS1 Inverter Power Selection Header
 +
| GPIO_4
 +
| GPIO4/HDA_RST# Selection
 +
|-
 +
| J31
 +
| Clear CMOS Header
 +
| GPIO_5
 +
| GPIO5/PWM_OUT Selection
 +
|-
 +
| J25
 +
| SPI Power Header
 +
| GPIO_6
 +
| GPIO6/TACHIN Selection
 +
|-
 +
| SW1
 +
| COM1 mode Select
 +
| SATA_ACT_PH1
 +
| SATA act# Header
 +
|-
 +
| SW2
 +
| COM3 mode Select
 +
| PWRBTN_PH1
 +
| Power button Header
 +
|-
 +
| J41
 +
| Core Power Voltage Control Header
 +
| SYS_RESET_PH1
 +
| Reset button Header
 +
|-
 +
| J2
 +
| DDI1 AUX/DDC Selection
 +
| &nbsp;
 +
| &nbsp;
 +
|}
 +
 
 +
=== '''LED Function List&nbsp;''' ===
 +
 
 +
{| border="1" cellpadding="1" cellspacing="1"
 +
|-
 +
| Location
 +
| Function
 +
|-
 +
| MODULE_VIN_LED1
 +
| WDT_TIME_OUT# Indicate
 +
|-
 +
| MODULE_5V_LED
 +
| Module 5V Indicate
 +
|-
 +
| MODULE_VIN_LED
 +
| Module +V_MOD_IN Indicate
 +
|-
 +
| RESET_OUT_LED
 +
| RESET_OUT Indicate
 +
|-
 +
| RESET_OUT_LED
 +
| CARRIER_STBY Indicate
 +
|-
 +
| CARRIER_PWR_ON_LED
 +
| CARRIER_PWR_ON Indicate
 +
|-
 +
| MODULE_3P3V_LED
 +
| Module 3.3V Indicate
 +
|-
 +
| 3P3V_LED
 +
| Carrier Board +V3.3 Indicate
 +
|-
 +
| 5V_LED
 +
| Carrier Board +V5 Indicate
 +
|-
 +
| 5V_DUAL_LED
 +
| Carrier Board +V5SB Indicate
 +
|-
 +
| 3P3V_DUAL_LED
 +
| Carrier Board +V3.3SB Indicate
 +
|-
 +
| 5VA_LED
 +
| Carrier Board +V5D_MOD Indicate
 +
|-
 +
| SATA_LED
 +
| SATA Indicate
 +
|-
 +
| SOM_LED
 +
| SOM BOM Indicate
 +
|-
 +
| RISC_LED
 +
| RISC BOM Indicate
 +
|}
  
−
插一张图片
+
=== '''Switch Settings'''&nbsp; ===
  
−
'''LED Function List'''
+
*[[SW4|SW4]]&nbsp;(Boot Select/Force Recovery/Test Switches)
 +
*[[LID1|LID1]]&nbsp;(LID Button Enable/Disable Switches)
 +
*[[SW5|SW5 ]](LAN CONN LED Pull High Switches)
 +
*[[COM0_Settings|SW1]](COM0 Settings)
 +
*[[SW2|SW2]](COM2 Settings)
 +
*[[I2S_Clock_Settings|SW3&nbsp;]](I2S Clock Settings)
 +
*[[M2E_DISABLE_N1|M2E_DISABLE_N1]](M.2 Wireless Disable Switch)
  
−
插一张图片
+
=== '''接口引脚定義 (Connector Pin definitions)''' ===
  
−
'''Switch Settings'''
+
*[[ATX1_Pin_Connector|&nbsp;ATX1 Pin Connector]]
 +
*[[SMARC_IN1_Pin_Connectors|SMARC_IN1 Pin Connectors]]
 +
*[[BAT1_RTC_Battery_Connectors|BAT1 RTC Battery Connectors]]
 +
*[[DCIN1_DC-IN_Power_Connectors|DCIN1 DC-IN Power Connectors]]
 +
*[[CAN0_1_CAN_Bus_Connectors|CAN0_1 CAN Bus Connectors]]
 +
*[[CN9_GPIO_Headers|CN9 GPIO Headers]]
 +
*[[COM2_4_COM_Port2&4_Connectors|COM2_4 COM Port2&4 Connectors]]
 +
*[[COM1_3_COM_Port1&_3_Connectors|COM1_3 COM Port1& 3 Connectors]]
 +
*[[CN10_ESPI_Headers|CN10 ESPI Headers]]
 +
*[[LVDS0_LVDS_Connectors|LVDS0 LVDS Connectors]]
 +
*[[LVDS0_INVERTER_LVDS_INVERTER_Connectors|LVDS0_INVERTER LVDS INVERTER Connectors]]
 +
*[[LVDS1_LVDS_Connectors|LVDS1 LVDS Connectors]]
 +
*[[LVDS1_INVERTER_LVDS_INVERTER_Connectors|LVDS1_INVERTER LVDS INVERTER Connectors]]
 +
*[[CN7_I2C_GP_Connectors|CN7 I2C_GP Connectors]]
 +
*[[SPI_CN1_SPI_Connectors|SPI_CN1 SPI Connectors]]
 +
*[[SATAP1_SATA_PWR_Connectors|SATAP1 SATA PWR Connectors]]
 +
*[[CSI0_FPC_Connectors|CSI0_FPC Connectors]]
 +
*[[CSI1_FPC_Connectors|CSI1_FPC Connectors]]
 +
*[[CN5_I2S2_Connectors|CN5 I2S2 Connectors]]
 +
*[[CN17_I2S0_Connectors|CN17 I2S0 Connectors]]
 +
*[[PWRBTN_PH1_PWRBTN_Pin_Headers|PWRBTN_PH1 PWRBTN Pin Headers]]
 +
*[[SYS_RESET_PH1_SYS_RESET_Pin_Headers|SYS_RESET_PH1 SYS RESET Pin Headers]]
 +
*[[SATA_ACT_PH1_SATA_ACT|SATA_ACT_PH1 SATA ACT# Pin Headers]]
 +
*[[J32_Power_LED_Pin_Headers|J32 Power LED Pin Headers]]
 +
*[[J30_BATLOW_Pin_Headers|J30 BATLOW Pin Headers]]
 +
*[[J29_SMBUS_Alert_Pin_Headers|J29 SMBUS Alert Pin Headers]]
 +
*[[J41_Core_Power_Controls|J41 Core Power Controls]]
 +
*[[PSON1_ATX/AT_Mode_Selection|PSON1 ATX/AT Mode Selection]]
 +
*[[J56_Standby_Power_Controls|J56 Standby Power Controls]]
 +
*[[J44_Module_Power_Settings|J44 Module Power Settings]]
 +
*[[J7,J8_LVDS0_Power_Selection|J7,J8 LVDS0 Power Selection]]
 +
*[[J9_LVDS0_Inverter_Power_Selection|J9 LVDS0 Inverter Power Selection]]
 +
*[[J11,J12_LVDS1_Power_Selection|J11,J12 LVDS1 Power Selection]]
 +
*[[LVDS1_Inverter_Power_Selection|LVDS1 Inverter Power Selection]]
 +
*[[EDP0_/LVDS0_HPD_Selection|EDP0 /LVDS0 HPD Selection]]
 +
*[[J14_EDP1/LVDS1_HPD_Selection|J14 EDP1/LVDS1 HPD Selection]]
 +
*[[CN14_CAN0_Terminal_Resistor_Selection|CN14 CAN0 Terminal Resistor Selection]]
 +
*[[CN15_CAN1_Terminal_Resistor_Selection|CN15 CAN1 Terminal Resistor Selection]]
 +
*[[J2_DDI1_AUX/DDC_Selection|J2 DDI1 AUX/DDC Selection]]
 +
*[[J1_DP1/HDMI1_Selection|J1 DP1/HDMI1 Selection]]
 +
*[[J58_PCIE_B_CKREQ|J58 PCIE_B_CKREQ# Selection]]
 +
*[[J59_PCIE_A_CKREQ|J59 PCIE_A_CKREQ# Selection]]
 +
*[[J31_Clear_CMOS|J31 Clear CMOS]]
 +
*[[J25_+V1.8M_SPI_Power_Jumpers|J25 +V1.8M_SPI Power Jumpers]]
 +
*[[GPIO_0_GPIO0_Settings|GPIO_0 GPIO0 Settings]]
 +
*[[GPIO_1_GPIO1_Settings|GPIO_1 GPIO1 Settings]]
 +
*[[GPIO_2_GPIO2_Settings|GPIO_2 GPIO2 Settings]]
 +
*[[GPIO_3_GPIO3_Settings|GPIO_3 GPIO3 Settings]]
 +
*[[GPIO_4_GPIO4_Settings|GPIO_4 GPIO4 Settings]]
 +
*[[GPIO_5_GPIO5_Settings|GPIO_5 GPIO5 Settings]]
 +
*[[GPIO_6_GPIO6_Settings|GPIO_6 GPIO6 Settings]]
 +
*[[J26_HDA/I2S_Selection|J26 HDA/I2S Selection]]
  
−
SW4 Boot Select/Force Recovery/Test Switches
+
=== '''ROM-5880 机械尺寸（Mechanical Characteristics）''' ===
  
−
插两张图片
+
*'''Dimension: SMARC form factor size: (D x W) 82 x 50 mm/3.22 x 1.9 in'''
  
−
LID Button Enable/Disable Switches
+
[[File:ROM-5880 Dimensions.png|RTENOTITLE]]
  
−
插两张图片
+
*'''Height on top: Under 3.0 mm'''
 +
*'''Height on bottom: Under 2.0 mm'''
  
−
== '''机械尺寸 ('''Mechanical Characteristics) ==
+
[[File:ROM-5880 Mechanical Specifications.png|RTENOTITLE]]
 +
 
 +
=== '''SOM-DB2510_A1 机械尺寸 ('''Mechanical Characteristics) ===
  
 
For more details regarding our 2D/3D models, please visit the Advantech COM support&nbsp; service website at: [http://com.advantech.com http://com.advantech.com].
 
For more details regarding our 2D/3D models, please visit the Advantech COM support&nbsp; service website at: [http://com.advantech.com http://com.advantech.com].
  
−
'''Board Mechanical Diagram -Front'''
+
=== '''Board Mechanical Diagram -Front''' ===
  
−
&nbsp;
+
[[File:SOM-DB2510 Board Mechanical Diagram - Front.png|RTENOTITLE]]
  
 
'''Board Mechanical Diagram -Side1'''
 
'''Board Mechanical Diagram -Side1'''
  
−
&nbsp;
+
[[File:SOM-DB2510 Board Mechanical Diagram Side1.png|RTENOTITLE]]
  
 
'''Board Mechanical Diagram -Side2'''
 
'''Board Mechanical Diagram -Side2'''
 +
 +
[[File:SOM-DB2510 Board Mechanical Diagram Side2.png|RTENOTITLE]]
  
 
&nbsp;
 
&nbsp;
Line 151: Line 485:
 
These figures demonstrate the order of assembly needed when attaching the thermal&nbsp; module and COM module to the carrier board.
 
These figures demonstrate the order of assembly needed when attaching the thermal&nbsp; module and COM module to the carrier board.
  
−
&nbsp;
+
[[File:ROM-5880 for SOM-DB2510 Assembly Diagram.png|RTENOTITLE]]
 +
 
  
 
== '''快速入门 (Quick Start)''' ==
 
== '''快速入门 (Quick Start)''' ==
  
 
=== '''系统下载 (OS Download)''' ===
 
=== '''系统下载 (OS Download)''' ===
 +
<div>Note：LIV=Yocto Linux , UIV=Ubuntu，DIV=Debain，AIV=Android&nbsp;</div>
 +
&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; LBV=BSP，LIV=Image
 +
 +
{| border="1" cellpadding="1" cellspacing="1"
 +
|-
 +
| '''Platform'''
 +
| '''Product'''
 +
| '''Image Version'''
 +
| '''Release Date'''
 +
| '''Release Version'''
 +
| '''Release notes'''
 +
| '''Image Download'''
 +
| '''BSP Download Tag'''
 +
| '''Comment'''
 +
| '''CAN2.0 Patch'''
 +
|-
 +
| RK3568
 +
| ROM-5880
 +
| DIV130033
 +
| 2023/08/29
 +
| RTM
 +
| [http://ess-wiki.advantech.com.tw/view/AIM-Linux/BSP/RockChip/Linux_Debian_OS_Release_note/ROM-5880/DIV130033 Release_Note]
 +
|
 +
[https://pan.baidu.com/s/1oJb5kMPtSyvsNxmmuebm5A Baidu]&nbsp;&nbsp; &nbsp; &nbsp;Password：a887
 +
 +
[https://www.dropbox.com/sh/a8tjyodf4a3mxpb/AAAsLlKReCHtnyZzyP-hNOhFa?dl=0 Dropbox]
 +
 +
| RK3568_RISC_DIV130033.xml&nbsp;
 +
|
 +
'''[https://pan.baidu.com/s/1WeQwXmE409gA4vJxhRqusg?pwd=a887 CAN2.0 Errata&nbsp;]&nbsp;'''
  
 +
提取码：a887
  
−
&nbsp;
+
| [https://pan.baidu.com/s/1I5MOuiH3uVn2xJjP8VuVVA?pwd=a887 Baidu]&nbsp;Password：a887
 +
|}
 +
 
 +
*Alpha: &nbsp;Basic I/O function bring up by RD;
 +
 
 +
*Beta: &nbsp;Basic I/O function、performance and middleware verified by RD. Peripherals integrated;
 +
 
 +
*GA: &nbsp;Beta version by QE verification;
 +
 
 +
*RTM: &nbsp;Beta version by SI/Power/QE verification and pre-loaded;
 +
 
 +
=== '''Debian 燒錄方法 (Debiand Flash eMMC Method)''' ===
 +
 
 +
<span style="color:#2980b9;">'''1.'''&nbsp;&nbsp;</span>[[1.Usering_RKTool.|<span style="color:#2980b9;">'''Usering_RKTool.'''</span>]]
  
−
== '''Android 燒錄方法 (Android Flash eMMC Method)''' ==
+
'''<span style="color:#2980b9;">2.&nbsp; </span>[[Using_bootup_sd_disk_made_by_SDDiskTool_for_ROM-5880|<span style="color:#2980b9;">Usering bootup_sd_disk made_by SDDiskTool.</span>]]'''
  
−
&nbsp;
+
'''<span style="color:#2980b9;">3.&nbsp;&nbsp;[[Upgrade_with_system_command_for_ROM-5880|Upgrade with system command.]]</span>'''
  
−
== '''User Guide''' ==
+
== '''Linux基本使用方法''' ==
  
−
&nbsp;
+
*[[Getting_Start（ROM-5880）|'''Getting Start''']]
 +
*'''[[ROM-5880_QT_ToolsChain|QT_ToolsChain]]'''
 +
*[[ROM-5880_NPU_SDK|'''NPU_SDK''']]
 +
*'''MAC_Address'''
  
−
== '''通用方法(General Method)''' ==
+
== '''Linux BSP编译方法（Linux BSP Compile Method）''' ==
  
−
== &nbsp; ==
+
[[Linux_BSP_User_Guide_for_rk3568-ROM5880_series_Debain_10|'''Linux_BSP_User_Guide_for_rk3568_series_Debain_10''']]

Latest revision as of 06:40, 24 June 2024

 

产品特性(Features)

  • Rockchip RK3568 Arm Quad Cortex-A55 up to 2.0GHz
  • Onboard 2/4GB LPDDR4 memory and 16/32GB eMMC
  • Support 1 x HDMI2.0 4K, 1 x signal LVDS or 1 x MIPI DSI 
  • Support 4K H.264/H.265 Video decoder
  • 2 x USB3.0, 2 x USB2.0, 4 x UART, 14 x GPIO
  • 2 x PCIe3.0, 1 x SATA, 1 x MIPI CSI, 2 x Gigabit LAN
  • Support Linux & Android

产品官网链接（Product official website link）

ROM-5880 - 基于瑞芯微RK3568平台的SMARC2.1核心模块 - 研华 (advantech.com.cn)

接口布局和尺寸（Layout and Sizes）

ROM-5880接口布局图 Board Dimension Layout

RTENOTITLE

Connector List

Debug

Position Description
DEBUG DEBUG Port

Switch

Position Description
SW1 AT&ATX mode selection

SW1：AT/ATX Mode Selection

Setting Function
1 off  2 on AT Mode（Default）
1 on 2 off ATX Mode

RTENOTITLE

SOM-DB2510 A1 Board Dimension Layout

The figures below indicate the main chips on SOM-DB2510 Development Board for  SMARC 2.1.

RTENOTITLE

SOM-DB2510 Connectors and Jumper Settings

Connector Locations

RTENOTITLE

RTENOTITLE

Switch Locations

RTENOTITLE

I/O Connctor Locations

RTENOTITLE

Button Locations

RTENOTITLE

LED Locations

RTENOTITLE

Label Function Label Function
ATX1 ATX Connector FAN1 Smart Fan Connector
SMARC_IN1 Wide Range Input Power Connector (3V~5.25V) FAN2 System Fan Connector
DCIN1 DCIN connector CAN0_1 CAN Bus Connector
DP0_HDMI DP & HDMI Connector USB0 USB OTG Connector
USB12 USB 2.0 port1~2 & USB 3.0 port0 Connector COM1_3 COM Port Port1,3 Connector
TYPEC_DP1 Type-C Connector COM2_4 COM Port Port2,4 Connector
LAN0_LAN1 LAN0 & LAN1 Connector CN8 I2C connector for I2C_PM
LOUT1 Line Out Connector CN7 I2C Connector for I2C_GP
MIC1 MIC1 Connector CN10 eSPI Pin Header
CN1_MXM1 SMARC Connector SATAP1 SATA Power Connector
PCIEA-X4 PCIe x4 Connector CSI0_B2B MIPI B2B Connector for 2M Camera
SATA1 SATA Port0 Connector CSI1_B2B MIPI B2B Connector for 8M & 13M Camera
PCIED-X1 PCIe x1 Connector SPI_BIOS1 Carrier Board BIOS Socket (SOIC)
M2 M.2 Key-E Connector BAT1 Coin battery holder
MPCIE_C Mini PCIe Connector BAT2 Smart battery Connector
SIM SIM card Connector LINEOUT_1 I2S Headphone Connector
LVDS1 LVDS1 Connector MIC_1 I2S MIC In Connector
LVDS0 LVDS0 Connector CSI1_FPC MIPI FPC Connector for 8M & 13M Camera
LVDS1_INVERTER LVDS1 Invertor Connector CSI0_FPC MIPI FPC Connector for 2M Camera
LVDS0_INVERTER LVDS0 Invertor Connector CN5 I2S2 Connector
SPI_BIOS2 Carrier Board BIOS Socket (QFN) CN17 I2S0 Connector
SD SD Card Connector    

Jumper Locations

RTENOTITLE

RTENOTITLE

Lable Function Lable Function
BTN3 Sleep Button J14 EDP1/LVDS1 Hot-Plug Detect Selection Header
BTN1 Power Button J56 Standby Voltage Control Header
BTN2 Reset Button J44 Module +3.3V/+5V Power Selection Header
SW4 BOOT SELECT Switch PSON1 AT/ATX Selection Header
LID1 LID Switch SPI_CN1 SPI Header
J30 Enable Battery Low# Header CN14 For CAN Bus port0 Terminal Resistor
M2E_DISABLE_N1 M.2 Wireless Disable CN15 For CAN Bus port1 Terminal Resistor
J29 SMB Alert Enable Header J3/J4 DP0 EQ0 Selection
CN9 Header For GPIO Test J5/J6 DP0 EQ1 Selection
J7/J8 LVDS0 Power Selection Header J58 PCIE_B_CKREQ# Selection
J11/J12 LVDS1 Power Selection Header J59 PCIE_A_CKREQ# Selection
J9 LVDS0 Inverter Power Selection Heade GPIO_0 GPIO0/CAM0_PWR# Selection
J10 EDP0/LVDS0 Hot-Plug Detect Selection Header GPIO_1 GPIO1/CAM1_PWR# Selection
J26 HDA/I2S Selection Header GPIO_2 GPIO2/CAM0_RST# Selection
J1 DP1/HDMI1 Select GPIO_3 GPIO3/CAM1_RST# Selection
J13 LVDS1 Inverter Power Selection Header GPIO_4 GPIO4/HDA_RST# Selection
J31 Clear CMOS Header GPIO_5 GPIO5/PWM_OUT Selection
J25 SPI Power Header GPIO_6 GPIO6/TACHIN Selection
SW1 COM1 mode Select SATA_ACT_PH1 SATA act# Header
SW2 COM3 mode Select PWRBTN_PH1 Power button Header
J41 Core Power Voltage Control Header SYS_RESET_PH1 Reset button Header
J2 DDI1 AUX/DDC Selection    

LED Function List 

Location Function
MODULE_VIN_LED1 WDT_TIME_OUT# Indicate
MODULE_5V_LED Module 5V Indicate
MODULE_VIN_LED Module +V_MOD_IN Indicate
RESET_OUT_LED RESET_OUT Indicate
RESET_OUT_LED CARRIER_STBY Indicate
CARRIER_PWR_ON_LED CARRIER_PWR_ON Indicate
MODULE_3P3V_LED Module 3.3V Indicate
3P3V_LED Carrier Board +V3.3 Indicate
5V_LED Carrier Board +V5 Indicate
5V_DUAL_LED Carrier Board +V5SB Indicate
3P3V_DUAL_LED Carrier Board +V3.3SB Indicate
5VA_LED Carrier Board +V5D_MOD Indicate
SATA_LED SATA Indicate
SOM_LED SOM BOM Indicate
RISC_LED RISC BOM Indicate

Switch Settings 

  • SW4 (Boot Select/Force Recovery/Test Switches)
  • LID1 (LID Button Enable/Disable Switches)
  • SW5 (LAN CONN LED Pull High Switches)
  • SW1(COM0 Settings)
  • SW2(COM2 Settings)
  • SW3 (I2S Clock Settings)
  • M2E_DISABLE_N1(M.2 Wireless Disable Switch)

接口引脚定義 (Connector Pin definitions)

ROM-5880 机械尺寸（Mechanical Characteristics）

  • Dimension: SMARC form factor size: (D x W) 82 x 50 mm/3.22 x 1.9 in

RTENOTITLE

  • Height on top: Under 3.0 mm
  • Height on bottom: Under 2.0 mm

RTENOTITLE

SOM-DB2510_A1 机械尺寸 (Mechanical Characteristics)

For more details regarding our 2D/3D models, please visit the Advantech COM support  service website at: http://com.advantech.com.

Board Mechanical Diagram -Front

RTENOTITLE

Board Mechanical Diagram -Side1

RTENOTITLE

Board Mechanical Diagram -Side2

RTENOTITLE

 

Assemblly Diagram

These figures demonstrate the order of assembly needed when attaching the thermal  module and COM module to the carrier board.

RTENOTITLE


快速入门 (Quick Start)

系统下载 (OS Download)

Note：LIV=Yocto Linux , UIV=Ubuntu，DIV=Debain，AIV=Android 

            LBV=BSP，LIV=Image

Platform Product Image Version Release Date Release Version Release notes Image Download BSP Download Tag Comment CAN2.0 Patch
RK3568 ROM-5880 DIV130033 2023/08/29 RTM Release_Note

Baidu      Password：a887

Dropbox

RK3568_RISC_DIV130033.xml 

CAN2.0 Errata  

提取码：a887

Baidu Password：a887
  • Alpha:  Basic I/O function bring up by RD;
  • Beta:  Basic I/O function、performance and middleware verified by RD. Peripherals integrated;
  • GA:  Beta version by QE verification;
  • RTM:  Beta version by SI/Power/QE verification and pre-loaded;

Debian 燒錄方法 (Debiand Flash eMMC Method)

1.  Usering_RKTool.

2.  Usering bootup_sd_disk made_by SDDiskTool.

3.  Upgrade with system command.

Linux基本使用方法

Linux BSP编译方法（Linux BSP Compile Method）

Linux_BSP_User_Guide_for_rk3568_series_Debain_10

Retrieved from "https://ess-wiki.advantech.com.tw/wiki/index.php?title=ROM-5880_user_guide&oldid=35866"