Difference between revisions of "WASCADA Service"
| Line 61: | Line 61: | ||
'''''Config WebAcess can refer [http://ess-wiki.advantech.com.tw/wiki/images/e/eb/WebAccess_Training_-_Step_By_Step.pdf WebAccess Training - Step By Step]''''' | '''''Config WebAcess can refer [http://ess-wiki.advantech.com.tw/wiki/images/e/eb/WebAccess_Training_-_Step_By_Step.pdf WebAccess Training - Step By Step]''''' | ||
| + | = Json Data Format = | ||
= Use Case = | = Use Case = | ||
= Release = | = Release = | ||
Revision as of 10:06, 9 October 2018
Contents
Introduction
WebAccess is a web browser based software for Human Machine Interface (HMI) and Supervisory Control and Data Acquisition. The software acquires, displays and stores real-time data and allows operators to change setpoints, equipment status and other parameters in Programmable Logic Controllers (PLCs), Controllers, IO, RTUs, DCS and DDC systems.
SCADA is a component in WebAccess system. It's communicates with automation devices and the Clients.
WASCADA Service
How to
Installation
1.Install Microsoft Visual C++ 2015 Redistributable Package (32bit).
https://www.microsoft.com/en-US/download/details.aspx?id=48145
2.Double click Agent_WASCADA_Handler_X.X.X.exe to install.
3.Follow step wizard to install WASCADA Service.
Configuration
After the installation is done, WASCADAHandler.ini (path: \Program Files (x86)\Advantech\Agent_WASCADA_Handler\) must be edited so that the plug-in will work:
1.WASCADAHandler.ini
Set WebAccess IP, User name and Password encoded in base64 and others.
When finishing edit ini file, restart service of Agent_WASCADA_Handler.
[Setting]
Server=127.0.0.1 ; the IP address of WebAccess
Authorization=Basic YWRtaW46 ; The 'username:password' of WebAccess encoded
; in base64, and add 'Basic' at the front. E.g. if your
; username is "admin" and password is "", the word
; after encoding is 'YWRtaW46'; then adding 'Basic'
; at the front, become 'Basic YWRtaW46'.
RetrieveInterval_ms=10000 ; The interval of time (ms) of acquiring data.
; 10000 represents 10 seconds
RetrieveSpecificTags=0 ; 0: Acquire data of all tags in WebAccess
; 1: Acquire data of selected tags in WebAccess.
; Set the selected tags in [Tags] down below.
; Settings in [Tags] are only effective when
; this variable is set to 1.
[Tags]
numberOfTags=2 ; The total number of tags
Tag0=Project1,tag1
Tag1=Project1,tag2
;tag = project name, tag name
2. Restart "Agent_WASCADA_Handler" Service.
3.On the RMM cloud, check if WASCADAHandler tab is appearing.
Config WebAcess can refer WebAccess Training - Step By Step