Difference between revisions of "IoTGateway/BSP/Linux/iMX6/Mfgtool"
From ESS-WIKI
| Line 18: | Line 18: | ||
:Set end mode,then power on(1-off,2-on) | :Set end mode,then power on(1-off,2-on) | ||
:[[File:other_project_mfgtool.jpg|200px]] | :[[File:other_project_mfgtool.jpg|200px]] | ||
| + | |||
| + | =Step 2= | ||
| + | ==Connect the OTG to the PC== | ||
| + | :After connecting to PC, a HID-compliant device will be shown in the Device | ||
| + | :[[File:dm_mfgtool.jpg |500px]] | ||
Revision as of 10:53, 2 June 2016
User Guide for using mfgtool
Step 1
ROM-5420
- Set the correct boot mode, then power on.
ROM-3420
- ATX mode
- In power off state,press power key for 5 secs and release
- AT mode
- Press power key ,then plug AC adapter,release power key after 5 secs
Other Projects
- Set end mode,then power on(1-off,2-on)
Step 2
Connect the OTG to the PC
- After connecting to PC, a HID-compliant device will be shown in the Device
