Difference between revisions of "Wise32xxweb/LuCI"
| Line 135: | Line 135: | ||
Setting Ethernet IP address. | Setting Ethernet IP address. | ||
| − | *Select Wan interface. | + | '''*Select Wan interface.''' |
[[File:3240ethernet.jpg|1000px|3240ethernet.jpg]] | [[File:3240ethernet.jpg|1000px|3240ethernet.jpg]] | ||
| Line 143: | Line 143: | ||
[[File:3240ethernet 1.jpg|1000px|3240ethernet 1.jpg]] | [[File:3240ethernet 1.jpg|1000px|3240ethernet 1.jpg]] | ||
| − | *Click switch protocol. | + | '''*Click switch protocol.''' |
[[File:3240ethernet 2.jpg|1000px|3240ethernet 2.jpg]] | [[File:3240ethernet 2.jpg|1000px|3240ethernet 2.jpg]] | ||
| − | *Input IPv4 IP address & netmask and submit. | + | '''*Input IPv4 IP address & netmask and submit.''' |
[[File:3240ethernet 3.jpg|1000px|3240ethernet 3.jpg]] | [[File:3240ethernet 3.jpg|1000px|3240ethernet 3.jpg]] | ||
| Line 157: | Line 157: | ||
[[File:3240wifi.jpg|1000px|3240wifi.jpg]] | [[File:3240wifi.jpg|1000px|3240wifi.jpg]] | ||
| − | *Edit wifi AP mode | + | '''*Edit wifi AP mode''' |
User can edit wifi AP parameter. | User can edit wifi AP parameter. | ||
| − | *Wireless network is enabled | + | '''*Wireless network is enabled''' |
To enable/disable the WIFI SSID instance. | To enable/disable the WIFI SSID instance. | ||
| − | *Channel | + | '''*Channel''' |
User can choose the desired channel or leave it auto to automatically selection. | User can choose the desired channel or leave it auto to automatically selection. | ||
| − | *Transmit Power | + | '''*Transmit Power''' |
The maximum power is 0~30dbm and user can lower down the transmission power. | The maximum power is 0~30dbm and user can lower down the transmission power. | ||
| − | *ESSID | + | '''*ESSID''' |
The SSID for this wireless interface. | The SSID for this wireless interface. | ||
| − | *Mode | + | '''*Mode''' |
User can configure this SSID to be AP, Client or WDS-AP, WDS-Client. | User can configure this SSID to be AP, Client or WDS-AP, WDS-Client. | ||
| − | *Hide ESSID | + | '''*Hide ESSID''' |
User can choose to hide SSID explored by clients | User can choose to hide SSID explored by clients | ||
| − | 1. Click Edit button | + | '''1.''' Click Edit button |
[[File:3240wifi 9.jpg|1000px|3240wifi 9.jpg]] | [[File:3240wifi 9.jpg|1000px|3240wifi 9.jpg]] | ||
| − | 2. Change Channel、Transmit Power | + | '''2.''' Change Channel、Transmit Power |
[[File:3240wifi11.jpg|1000px|3240wifi11.jpg]] | [[File:3240wifi11.jpg|1000px|3240wifi11.jpg]] | ||
| − | 3. Change SSID and Password yourself | + | '''3.''' Change SSID and Password yourself |
[[File:3240wifi 7.jpg|1000px|3240wifi 7.jpg]] | [[File:3240wifi 7.jpg|1000px|3240wifi 7.jpg]] | ||
| − | 4. The password need select Encryption and string length must be more than 8. | + | '''4.''' The password need select Encryption and string length must be more than 8. |
[[File:3240wifi 8.jpg|1000px|3240wifi 8.jpg]] | [[File:3240wifi 8.jpg|1000px|3240wifi 8.jpg]] | ||
| Line 207: | Line 207: | ||
The default setting is support 1 & 2 mode and 3 & 4 mode set up step by step as follow | The default setting is support 1 & 2 mode and 3 & 4 mode set up step by step as follow | ||
| − | 1. WAN <-> LAN : Ready by default configuration | + | '''1.''' WAN <-> LAN : Ready by default configuration |
| − | 2. WAN <-> Wi-Fi AP : Ready by default configuration | + | '''2.''' WAN <-> Wi-Fi AP : Ready by default configuration |
| − | 3. Wi-Fi Station <-> Wi-Fi AP : Set up steps as below | + | '''3.''' Wi-Fi Station <-> Wi-Fi AP : Set up steps as below |
| − | 4. Wi-Fi Station <-> LAN : Set up as Wi-Fi Station. | + | '''4.''' Wi-Fi Station <-> LAN : Set up as Wi-Fi Station. |
| − | *Establish Wi-Fi Staation <-> Wi-Fi AP mode setting. | + | '''*Establish Wi-Fi Staation <-> Wi-Fi AP mode setting.''' |
This mode is means wise-3240 wireless uplink through another Wifi Ap router to internet and downlink offer the Wifi client access point. | This mode is means wise-3240 wireless uplink through another Wifi Ap router to internet and downlink offer the Wifi client access point. | ||
| Line 223: | Line 223: | ||
The configure method step by step as following. | The configure method step by step as following. | ||
| − | 1. Scan other Wifi Ap router in user's network environment. | + | '''1.''' Scan other Wifi Ap router in user's network environment. |
[[File:3240wifi 2.jpg|1000px|3240wifi 2.jpg]] | [[File:3240wifi 2.jpg|1000px|3240wifi 2.jpg]] | ||
| − | 2. Join network as your network environment | + | '''2.''' Join network as your network environment |
[[File:3240wifi 1.jpg|1000px|3240wifi 1.jpg]] | [[File:3240wifi 1.jpg|1000px|3240wifi 1.jpg]] | ||
| Line 235: | Line 235: | ||
[[File:3240wifi 3.jpg|1000px|3240wifi 3.jpg]] | [[File:3240wifi 3.jpg|1000px|3240wifi 3.jpg]] | ||
| − | 3. Screen shows wifi client mode setting page. Click save & apply immediately. | + | '''3.''' Screen shows wifi client mode setting page. Click save & apply immediately. |
[[File:3240wifi 4.jpg|1000px|3240wifi 4.jpg]] | [[File:3240wifi 4.jpg|1000px|3240wifi 4.jpg]] | ||
| − | 4. User can check the connection SSID and RSSI percentage. After check SSID and RSSI , Click Disable button to stop wifi function. | + | '''4.''' User can check the connection SSID and RSSI percentage. After check SSID and RSSI , Click Disable button to stop wifi function. |
[[File:3240wifi 5.jpg|1000px|3240wifi 5.jpg]] | [[File:3240wifi 5.jpg|1000px|3240wifi 5.jpg]] | ||
| − | 5. we set up wifi station mode for uplink as above step and next step is setting Wifi Ap mode for downlink. | + | '''5.''' we set up wifi station mode for uplink as above step and next step is setting Wifi Ap mode for downlink. |
Click add button. | Click add button. | ||
| Line 257: | Line 257: | ||
[[File:3240wifi 8.jpg|1000px|3240wifi 8.jpg]] | [[File:3240wifi 8.jpg|1000px|3240wifi 8.jpg]] | ||
| − | 6. Enable wifi station connection and User can check wifi mode client and Master on screen. | + | '''6.''' Enable wifi station connection and User can check wifi mode client and Master on screen. |
[[File:3240wifi 10.jpg|1000px|3240wifi 10.jpg]] | [[File:3240wifi 10.jpg|1000px|3240wifi 10.jpg]] | ||
| − | *Establish Wi-Fi Station <-> LAN mode setting. | + | '''*Establish Wi-Fi Station <-> LAN mode setting.''' |
We only establish Wi-Fi Station and LAN interface is default setting. | We only establish Wi-Fi Station and LAN interface is default setting. | ||
| − | 1. Scan other Wifi Ap router in user's network environment. | + | '''1.''' Scan other Wifi Ap router in user's network environment. |
[[File:3240wifi 2.jpg|1000px|3240wifi 2.jpg]] | [[File:3240wifi 2.jpg|1000px|3240wifi 2.jpg]] | ||
| − | 2. Join network as your network environment | + | '''2.''' Join network as your network environment |
[[File:3240wifi 1.jpg|1000px|3240wifi 1.jpg]] | [[File:3240wifi 1.jpg|1000px|3240wifi 1.jpg]] | ||
| Line 277: | Line 277: | ||
[[File:3240wifi 3.jpg|1000px|3240wifi 3.jpg]] | [[File:3240wifi 3.jpg|1000px|3240wifi 3.jpg]] | ||
| − | 3. Screen shows wifi client mode setting page. Click save & apply immediately. | + | '''3.''' Screen shows wifi client mode setting page. Click save & apply immediately. |
[[File:3240wifi 4.jpg|1000px|3240wifi 4.jpg]] | [[File:3240wifi 4.jpg|1000px|3240wifi 4.jpg]] | ||
| − | 4. User can check the connection SSID and RSSI percentage. After check SSID and RSSI , Click Disable button to stop wifi function. | + | '''4.''' User can check the connection SSID and RSSI percentage. After check SSID and RSSI , Click Disable button to stop wifi function. |
[[File:3240wifi 5.jpg|1000px|3240wifi 5.jpg]] | [[File:3240wifi 5.jpg|1000px|3240wifi 5.jpg]] | ||
| Line 291: | Line 291: | ||
=== Status === | === Status === | ||
| − | User can find out LTE module information and sim card connection status in status page. The information of RSSI shows the connection signal strength. [[File:3200cellular3.JPG| | + | User can find out LTE module information and sim card connection status in status page. The information of RSSI shows the connection signal strength. [[File:3200cellular3.JPG|800px|3270 cellular 3.jpg]] |
=== Configuration === | === Configuration === | ||
| + | |||
| + | [[File:3200cellular2.jpg|800px|3270 cellular 2.jpg]] | ||
| + | |||
| + | [[File:3200cellular5.jpg|800px|3270 cellular 5.jpg]] | ||
== EPD Wifi Deploy Setting == | == EPD Wifi Deploy Setting == | ||
| + | |||
=== Node Configuration === | === Node Configuration === | ||
| + | |||
| + | '''step 1.''' | ||
| + | |||
| + | |||
| + | [[File:3200dp1.jpg|800px|3270 wifi deploy 1.jpg]] | ||
| + | |||
| + | '''step 2.''' | ||
| + | |||
| + | [[File:3200dp3.jpg|800px|3270 wifi deploy 3.jpg]] | ||
| + | |||
| + | '''step 3.''' | ||
| + | |||
| + | [[File:3200dp5.jpg|800px|3270 wifi deploy 5.jpg]] | ||
=== Node Import === | === Node Import === | ||
| + | |||
| + | '''step 1.''' | ||
| + | |||
| + | [[File:3200dp4.jpg|800px|3270 wifi deploy 4.jpg]] | ||
| + | |||
| + | '''step 2.''' | ||
| + | |||
| + | [[File:3200dp2.jpg|800px|3270 wifi deploy 2.jpg]] | ||
== EPD Router Setting == | == EPD Router Setting == | ||
| − | '''Router Setting only exists on WISE-3240 gateway model'''. It set up connection of EPD023 、EPD053 node. | + | |
| + | '''Router Setting only exists on WISE-3240 gateway model'''. It set up connection of EPD023 、EPD053 node. | ||
| + | |||
=== Router Configuration === | === Router Configuration === | ||
| − | |||
| − | |||
| − | |||
| + | User must set up Gateway IP address that is device of ARK 1123/2250 which has installed ePaper Manger system. Others MQTT Port、FTP Port number、FTP Username and FTP Password have default value that is follow settings of ePaper Manager . User should not change settings. | ||
| − | [[File:3200zb1.JPG| | + | [[File:3200zb1.JPG|800px|3240 router 1.jpg]] |
Revision as of 11:46, 3 March 2020
Contents
Default Setting
- IP Address: 192.168.1.1
- Username: root
- Password: ePaper
Main Page / System Information
If logging successful, you will see software information on the Overview page as following.
Status
Firewall
This page show firewall rule table. When you change the firewall setting of Ethernet interface , you should click Restart Firewall
System log
This page show about system log message
kernel log
This page show about linux Kernel message
Processes
This page shows all running processes on your system, with child processes indented and displayed below their parent. For each process the PID, owner and command are displayed. You can terminate the running processes but you should know the risk of the service stop in system.
System
System
This page offer three function operation as below
- System Properties
This function is for sync the system's current time with browser .On operating systems that have a separate hardware clock, it can be used to set that too. This form also offer User-defined host name.
- Change time zone
It also allows you to set the system's default time zone, which is used to convert the system time to a human-readable format and offset.
- Time server sync
This function is for configuring the system to automatically synchronize the time with a remote server. Synchronization will be done using the Unix time protocol or NTP, depending on which commands are installed and what the remote system supports.
Administration Users
This page you can change LuCI web login password as you want
Backup/Flash Firmware
This page has four operation Download backup、Restore backup 、Reset to defaults and flash firmware as below.
Download backup & Restore backup
User can download backup file that is value of all web settings by click on "Generate archive" button.
When user has been downloaded backup file, user can recover all web settings by function of restore backup.
Reset to defaults
Click "Perform reset" button the value of all the web settings will be back to original setting.
Firmware Update
Please download the most updated Firmware version from Advantech Website to your computer.
1.Click choose file button and upload the image.
2.Click "Flash image" button and upload firmware image
3. After firmware image upload complete, it show the Checksum on screen.
User should make sure the firmware checksum is correct or not and click button proceed.
- Please note
1. Firmware update process may take around 1~2 minutes, please don’t turn off the power or press the reset button.
2. After firmware upgrade, the system will restore its default setting, the IP address will return to 192.168.1.1.
3. The device is unavailable during the upgrade process. Any connections to or through the device will be lost.
Reboot
User can reboot system through clcik "Perform reboot". System will reboot immediately.
Service
Remote Management
In this Page, you can manage the router from anywhere on the Internet port.
Network Configuration
In this page, you can set Network or Wireless Interface and Routing Gateways based on your networking environment.
Ethernet
In this sector we suggest only editing ethernet wan interface instead of lan interface.
Setting Ethernet IP address.
*Select Wan interface.
- Select protocol static ip(DHCP or static ip)
*Click switch protocol.
*Input IPv4 IP address & netmask and submit.
Wireless
In this page, you can set wireless Interface, scan other wifi router in your environment or setting wifi AP mode. Default setting wifi Ap mode, The access point account: wise_3240 and no password
*Edit wifi AP mode
User can edit wifi AP parameter.
*Wireless network is enabled
To enable/disable the WIFI SSID instance.
*Channel
User can choose the desired channel or leave it auto to automatically selection.
*Transmit Power
The maximum power is 0~30dbm and user can lower down the transmission power.
*ESSID
The SSID for this wireless interface.
*Mode
User can configure this SSID to be AP, Client or WDS-AP, WDS-Client.
*Hide ESSID
User can choose to hide SSID explored by clients
1. Click Edit button
2. Change Channel、Transmit Power
3. Change SSID and Password yourself
4. The password need select Encryption and string length must be more than 8.
Network Mode
The network configurations has four mode that left interface represent uplink connection and right is downlink connection.
The default setting is support 1 & 2 mode and 3 & 4 mode set up step by step as follow
1. WAN <-> LAN : Ready by default configuration
2. WAN <-> Wi-Fi AP : Ready by default configuration
3. Wi-Fi Station <-> Wi-Fi AP : Set up steps as below
4. Wi-Fi Station <-> LAN : Set up as Wi-Fi Station.
*Establish Wi-Fi Staation <-> Wi-Fi AP mode setting.
This mode is means wise-3240 wireless uplink through another Wifi Ap router to internet and downlink offer the Wifi client access point.
The configure method step by step as following.
1. Scan other Wifi Ap router in user's network environment.
2. Join network as your network environment
Input password which you choice wifi connection and Click submit.
3. Screen shows wifi client mode setting page. Click save & apply immediately.
4. User can check the connection SSID and RSSI percentage. After check SSID and RSSI , Click Disable button to stop wifi function.
5. we set up wifi station mode for uplink as above step and next step is setting Wifi Ap mode for downlink.
Click add button.
User should input SSID 、Password as you need.
The password need select Encryption and string length must be more than 8.
6. Enable wifi station connection and User can check wifi mode client and Master on screen.
*Establish Wi-Fi Station <-> LAN mode setting.
We only establish Wi-Fi Station and LAN interface is default setting.
1. Scan other Wifi Ap router in user's network environment.
2. Join network as your network environment
Input password which you choice wifi connection and Click submit.
3. Screen shows wifi client mode setting page. Click save & apply immediately.
4. User can check the connection SSID and RSSI percentage. After check SSID and RSSI , Click Disable button to stop wifi function.
Cellular Configuration
The Cellular configuration only exists on WISE-3270 gateway model. It shows information of LTE module and working status . You may must not config items but it works well.
Status
User can find out LTE module information and sim card connection status in status page. The information of RSSI shows the connection signal strength. 
Configuration
EPD Wifi Deploy Setting
Node Configuration
step 1.
step 2.
step 3.
Node Import
step 1.
step 2.
EPD Router Setting
Router Setting only exists on WISE-3240 gateway model. It set up connection of EPD023 、EPD053 node.
Router Configuration
User must set up Gateway IP address that is device of ARK 1123/2250 which has installed ePaper Manger system. Others MQTT Port、FTP Port number、FTP Username and FTP Password have default value that is follow settings of ePaper Manager . User should not change settings.
