Difference between revisions of "Linux BSP User Guide for jetson series"

From ESS-WIKI
Jump to: navigation, search
Line 115: Line 115:
 
| style="width: 438px;" | $ cd $TOP/Linux_for_Tegra/210/<br/>$ sudo ./flash.sh -r -k kernel-dtb <span style="color:#0000FF;">jetson-nano-devkit-emmc</span> mmcblk0p1<br/>
 
| style="width: 438px;" | $ cd $TOP/Linux_for_Tegra/210/<br/>$ sudo ./flash.sh -r -k kernel-dtb <span style="color:#0000FF;">jetson-nano-devkit-emmc</span> mmcblk0p1<br/>
 
|}
 
|}
 +
 +
 +
== Flash Mac Address ==
 +
 +
I210
 +
<pre>
 +
$ sudo -s
 +
$ BDF=`lspci | grep 210 | awk '{print $1}'`
 +
$ setpci -s $BDF COMMAND=0007
 +
</pre>
 +
Get NIC
 +
<pre>$./EepromAccessTool</pre>
 +
Flash I210 address with mac_address = D4E5F6123456 ( If mac address = D4:E5:F6:12:34:56 )
 +
<pre>$ ./EepromAccessTool -nic=<NIC> -f=Dev_Start_I210_Copper_NOMNG_8Mb_A2_3.25_0.03.hex -mac=$mac_address</pre>
 +
Cold reboot the device.

Revision as of 07:28, 16 November 2021

Linux BSP Version

Ubuntu 18.04

Kernel 4.9.201

Build Environment on Host

Currently, we adopt Docker as build environment.

You can get the latest version of advrisc/u18.04-imx8lbv1 Docker image for developing nVidia jetson projects.

Docker command: 

$ docker pull advrisc/u18.04-imx8lbv1

Run Docker example

Step1 Run docker container (example) 

sudo docker run -it --name jetson_linux_risc -v /home/bsp/myLinux:/home/adv/BSP:rw --privileged advrisc/u18.04-imx8lbv1:latest /bin/bash

Step2 In container, change the user. (example) 

 adv@7cc0fa834366:~$ sudo chown adv:adv -R BSP

Install Some tools

$sudo apt-get install expect

Getting Linux Source Code

EPC-R7200 

$ cd ~/BSP
$ mkdir jetson_linux_risc
$ cd jetson_linux_risc
$ git config --global user.name "Your Name"
$ git config --global user.email you@example.com
$ ../repo/repo init -u https://gitlab.wise-paas.com/epc-r7200/manifests.git
$ ../repo/repo sync

AIR-020 

$ cd ~/BSP
$ mkdir jetson_linux_risc
$ cd jetson_linux_risc
$ git config --global user.name "Your Name"
$ git config --global user.email you@example.com
$ ../repo/repo init -u https://gitlab.wise-paas.com/air-020/manifests.git
$ ../repo/repo sync

Build Image ( EPC-R7200 / AIR-020 )

Xavier NX / TX2 NX 

$ cd $TOP
$ sudo ./scripts/build.sh -s 186

Nano 

$ cd $TOP
$ sudo ./scripts/build.sh -s 210

Build Kernel

Xavier NX / TX2 NX 

$ cd $TOP
$ sudo ./scripts/build_kernel.sh -s 186

Nano 

$ cd $TOP
$ sudo ./scripts/build_kernel.sh -s 210

Flash Image

Before flashing the image, power off the DUT, press recovery button and power on.


EPC-R7200
 AIR-020
Xavier NX
 $ cd $TOP/Linux_for_Tegra/186/
$ sudo ./flash.sh -d ./bootloader/tegra194-epcr7200.dtb  jetson-xavier-nx-devkit-emmc mmcblk0p1
 $ cd $TOP/Linux_for_Tegra/186/
$ sudo ./flash.sh jetson-xavier-nx-devkit-emmc mmcblk0p1
TX2 NX
 $ cd $TOP/Linux_for_Tegra/186/
$ sudo ./flash.sh -d ./bootloader/tegra186-epcr7200.dtb  jetson-xavier-nx-devkit-tx2-nx mmcblk0p1
 $ cd $TOP/Linux_for_Tegra/186/
$ sudo ./flash.sh jetson-xavier-nx-devkit-tx2-nx mmcblk0p1
Nano $ cd $TOP/Linux_for_Tegra/210/
$ sudo ./flash.sh -d ./bootloader/tegra210-epcr7200.dtb  jetson-nano-devkit-emmc mmcblk0p1
 $ cd $TOP/Linux_for_Tegra/210/
$ sudo ./flash.sh jetson-nano-devkit-emmc mmcblk0p1

Flash DTB


 EPC-R7200
 AIR-020
Xavier NX
 $ cd $TOP/Linux_for_Tegra/186/
$ sudo ./flash.sh -r -k kernel-dtb xavier-nx-epcr7200 mmcblk0p1
 $ cd $TOP/Linux_for_Tegra/186/
$ sudo ./flash.sh -r -k kernel-dtb jetson-xavier-nx-devkit-emmc mmcblk0p1
TX2 NX
 $ cd $TOP/Linux_for_Tegra/186/
$ sudo ./flash.sh -r -k kernel-dtb tx2-nx-epcr7200 mmcblk0p1
 $ cd $TOP/Linux_for_Tegra/186/
$ sudo ./flash.sh -r -k kernel-dtb jetson-xavier-nx-devkit-tx2-nx mmcblk0p1
Nano $ cd $TOP/Linux_for_Tegra/210/
$ sudo ./flash.sh -r -k DTB nano-epcr7200 mmcblk0p1
 $ cd $TOP/Linux_for_Tegra/210/
$ sudo ./flash.sh -r -k kernel-dtb jetson-nano-devkit-emmc mmcblk0p1


Flash Mac Address

I210 

$ sudo -s
$ BDF=`lspci | grep 210 | awk '{print $1}'`
$ setpci -s $BDF COMMAND=0007

Get NIC 

$./EepromAccessTool

Flash I210 address with mac_address = D4E5F6123456 ( If mac address = D4:E5:F6:12:34:56 ) 

$ ./EepromAccessTool -nic=<NIC> -f=Dev_Start_I210_Copper_NOMNG_8Mb_A2_3.25_0.03.hex -mac=$mac_address

Cold reboot the device.

Retrieved from "https://ess-wiki.advantech.com.tw/wiki/index.php?title=Linux_BSP_User_Guide_for_jetson_series&oldid=22350"