Revision as of 07:56, 26 May 2023

Preface

When sending samples to customer or test team (Lab、DQA etc) or releasing images, we need test all functions.

All functions are classified to three types:

• Full-automatic Test
• Semi-automatic Test
• Manual Test

Full-Automatic Test

Run test script and get the result automatically.

Support to test the following items:

• AIM Linux Applications
• AIM Linux Services
• AIM Timers
• Thermal
• NPU
• GPU
• VPU
• eMMC
• RTC

Preparation

• Insert network cable to DUT
• Open browser on DUT, then input "172.21.128.237"
• Login your account to connect to internet

Testing

Run the following command on DUT Terminal、ADB or Debug console:

  /tools/test/adv/auto_test/auto_test.sh

Result

1. Failure

[ Failed ]: docker run hello-world; Please check net connection, or docker

2. Success

[ OK ]: docker run hello-world

Semi-Automatic Test

GPIO

Test script need two GPIOs, set one GPIO to output and the other to input.

Then set the output to 1, read whether the input is 1.

Then set the output to 0, read whether the input is 0.

Preparation

Testing

For example:

To test ROM-5880's GPIO0 and GPIO1

Run the following command on DUT Terminal、ADB or Debug console:

  /tools/test/adv/gpio/gpio_test.sh 88 89

Result

UART

CAN

I2C PIN Header

SPI PIN Header

Manual Test

SD Card

SATA

PCIE

USB

watchdog

lan

wlan

bluetooth

4G/5G

Audio

Camera

Display

SW reboot

Reboot Button

Power Button