Difference between revisions of "ROM-6881 Usering RKTool."

From ESS-WIKI
Jump to: navigation, search
Line 38: Line 38:
 
rkboot # <INTERRUPT>
 
rkboot # <INTERRUPT>
 
rkboot # rbrom</pre>
 
rkboot # rbrom</pre>
 +
  
 
=== '''Step 5&nbsp;当核心板进入MASKROM模式后,再点击“执行”开始进行烧录''' ===
 
=== '''Step 5&nbsp;当核心板进入MASKROM模式后,再点击“执行”开始进行烧录''' ===
 +
 +
[[File:ROM-6881 RKTool MASKROM.png|800x600px]]
 +
 +
=== '''Step 6 烧录完成后,如下图''' ===
 +
 +
'''[[File:ROM-6881 RKTool ADB.png|800x600px]]'''

Revision as of 04:00, 29 November 2023

Step 1 List

a)准备一根Mirco USB和Debug Cable

RSB-3710 mirco usb 2021-11-02 143011.jpgDebug cable.png

b) 一个12V,3A的电源,给底板SOM-DB2510供电使能

Setp 2 架设环境如下:

ROM-6881 for SOM-DB2510.png


Step 3 电脑鼠标双击瑞芯微开发工具V2.96应用程序

ROM-6881 RKDevTool.v2.96.png

Step 4 Enter into MASKROM mode 

a)Hardwart way to enter MASKROM.

底板SOM-DB2510 的SW4,拨号为:5->ON,其他为OFF,进入MaskROM后,将拨码5->OFF.

b) Software way to enter MASKROM.

When the device boot up to android or debian, you can use ADB or Debug console, send command "reboot loader" .

Or Press "ctrl + c" key when booting into uboot, until get the following information on debug console : 

Android :

Hit any key to stop autoboot: 0
rkboot # <INTERRUPT>
rkboot # loader

Debian :

Hit any key to stop autoboot: 0
rkboot # <INTERRUPT>
rkboot # rbrom


Step 5 当核心板进入MASKROM模式后,再点击“执行”开始进行烧录

ROM-6881 RKTool MASKROM.png

Step 6 烧录完成后,如下图

ROM-6881 RKTool ADB.png