Difference between revisions of "RSB-3730 Yocto4.2 user guide"

Revision as of 09:50, 3 July 2024

產品介绍（Product Presentation）

產品特性(Product Features)

• NXP i.MX 8M PLUS 4xA53@1.8GHz
• Integrate 2.3 TOPS NPU and extend 8-26 TOPS AI card
• 4kP30,1080p60 HEVC, H.264, VP9, VP8 decoding
• 1080p60 H.265, H.264 encoding
• 1xHDMI2.0
• 5xGbE LAN, 1xGbE Fiber
• USB3.0,USB2.0,RS232,RS485,CAN FD,SATA,SD
• 8 Channels Mic Array
• Support AI card/5G/4G/GPS/ Wi-Fi 5/Wi-Fi6/BT
• Support TPM,TCM
• Linux and, Andriod
• Embeded DeviceOn, DeviceOn.CommBridge

產品官網鏈結（Product official website link）

RSB-3730 

硬件接口說明（Hardware interface description）

接口布局圖 Board Layout

接口尺寸 Board Dimension

Jumper List

Connector List

快速入門（Quick Start）

系統下載（OS Dowload）

Note： LIV= Yocto Linux, UIV=Ubuntu, DIV = Debian, AIV=Android

LBV=BSP, LIV= Image

LIV9=Yocto-2.5, LIVA=Yocto-3.0, LIVB=Yocto-3.3, LIVC=Yocto-4.0 , LIVD=Yocto-4.2……

Downloads : downloads_imx8_6.1.22_2.0.0.tar.gz (imx6 and imx8 support)

[downloads_imx8_6.1.22_2.0.0.tar.gz]

[downloads_imx93_6.1.36.tar.gz]

[ Dropbox link for imx8 Yocto 4.2_6.1.22 Image ]

[ Dropbox link for imx93 Yocto 4.2_6.1.36 Image

• Alpha: Basic I/O function bring up by RD;

• Beta: Basic I/O function、performance and middleware verified by RD. Peripherals integrated;

• GA: Beta version by QE verification;

• RTM: Beta version by SI/Power/QE verification and pre-loaded;

系统更新方法（System update method）

Device Routes：

eMMC：/dev/mmcblk2

SD: /dev/mmcblk1

QSPI: /dev/mtd0

For example：SD test

# dd if=/dev/urandom of=data bs=1 count=1024
# dd if=/dev/mmcblk1 of=backup bs=1 count=1024 skip=4096
# dd if=data of=/dev/mmcblk1 bs=1 seek=4096
# dd if=/dev/mmcblk1 of=data1 bs=1 count=1024 skip=4096
# diff data data1
# dd if=backup of=/dev/mmcblk1 bs=1 seek=4096

Install the System from SD Card

1. Copy imx-image-full-imx8mmrsb3730a2-xxxxxx.rootfs.sdcard package to your desk- top. use ubuntu OS.
2. Insert SD card to PC.
3. Make a bootable SD card. For example, the node of an SD card is /dev/sdv.

# umount /dev/sdv*
# dd if=./imx-image-full-imx8mmrsb3730a2-xxxx.rootfs.sdcard \
of=/dev/sdv bs=1M
# sync

4. Insert SD card and copy imx-image-full-imx8mmrsb3730a1-xxxxxx.rootfs.sdcard to USB disk.
5. Insert USB disk and SD card then boot the whole system from SD card by changing SW1 to 1-2 ON.
6. Enter usb disk folder, make a bootable emmc.

# cd /run/media/sda1/
# umount /dev/mmcblk2*
# dd if=./imx-image-full-imx8mmrsb3730a2-xxxx.rootfs.sdcard \
of=/dev/mmcblk2 bs=1M
# sync

Linux基本使用方法（Linux Basic usage method）

Display Setting

UART（RS-232/RS-485）

USB

4G

Audio

GPIO

I2C Test

RTC

Watchdog

Ethernet

WIFI

BT

WIFI & BT

UIO Test

BSP/Linux编译

Yocto Linux BSP Ver.A User Guide for RSB-3730 series-Yocto 4.2