Difference between revisions of "IoTGateway/BSP/Linux/iMX8/Build Instructions"
From ESS-WIKI
(Created page with "{{DISPLAYTITLE:i.MX8 Build Instruction}} = ROM-7720 = == Based on iMX8QM beta2 BSP == :<code>$ repo init -u git://github.com/ADVANTECH-Corp/adv-arm-yocto-bsp.git -b imx-linux...") |
(No difference)
|
Revision as of 10:05, 8 October 2018
ROM-7720
Based on iMX8QM beta2 BSP
$ repo init -u git://github.com/ADVANTECH-Corp/adv-arm-yocto-bsp.git -b imx-linux-morty -m imx-4.9.51-8qm_beta2.xml$ repo sync$ MACHINE=imx8qmrom7720a1 DISTRO=fsl-imx-x11 source ./fsl-setup-release.sh -b build-x11$ export LC_ALL=en_US.UTF-8 LANG=en_US.UTF-8 LANGUAGE=en_US.UTF-8$ bitbake fsl-image-qt5-validation-imx
Creating bootable SD card
While bitbake is done, the compressed image file, "fsl-image-qt5-validation-imx-imx8qmlpddr4arm2.sdcard.bz2", is located on the "tmp/deploy/images/imx8qmlpddr4arm2/" under the yocto base directory. Please use the following command to flash the SD card:
$ bunzip2 -c fsl-image-qt5-validation-imx-imx8qmlpddr4arm2.sdcard.bz2 | sudo dd of={SDCARD_device_name} bs=1M