Difference between revisions of "How to Config Multi-Display RK3568"

From ESS-WIKI
Jump to: navigation, search
(Created page with "RSB-4810 surport 4 display ports : eDP、LVDS、HDMI、MIPI.  You can config Multi-Display to eDP + HDMI 、eDP + LVDS、LVDS + HDMI 、eDP + DP、LVDS +...")
 
Line 1: Line 1:
−
RSB-4810 surport 4 display ports : eDP、LVDS、HDMI、MIPI. 
+
RK3399 has 3 VPorts. 
  
−
You can config Multi-Display to eDP + HDMI 、eDP + LVDS、LVDS + HDMI 、eDP + DP、LVDS + DP、HDMI + DP.
+
[[File:RK3568 Vport.png]]
  
−
'''NOTE：'''
+
RSB-4810 surport 4 types display : eDP、LVDS、HDMI、MIPI. 
 +
 
 +
'''Note：'''
 +
 
 +
1. HDMI、eDP、MIPI MUST be set to port 0 and port 1.
 +
 
 +
2. LVDS MUST be set to port 1 and port 2.
 +
 
 +
3.  LVDS and MIPI are alternative.
  
−
        Android distinguish the primary and the extend screen. 
 
  
−
== Contents ==
 
  
−
 [[http://ess-wiki.advantech.com.tw/view/How_to_Config_Multi-Display_for_RK3399_RSB710# hide]] 
 
  
−
*[http://ess-wiki.advantech.com.tw/view/How_to_Config_Multi-Display_for_RK3399_RSB710#Enter_U-boot_interrupt_mode 1 Enter U-boot interrupt mode]
 
−
*[http://ess-wiki.advantech.com.tw/view/How_to_Config_Multi-Display_for_RK3399_RSB710#eDP_.2B_HDMI 2 eDP + HDMI]
 
−
*[http://ess-wiki.advantech.com.tw/view/How_to_Config_Multi-Display_for_RK3399_RSB710#eDP_.2B_LVDS 3 eDP + LVDS]
 
−
*[http://ess-wiki.advantech.com.tw/view/How_to_Config_Multi-Display_for_RK3399_RSB710#LVDS_.2B_HDMI 4 LVDS + HDMI]
 
−
*[http://ess-wiki.advantech.com.tw/view/How_to_Config_Multi-Display_for_RK3399_RSB710#eDP_.2B_DP 5 eDP + DP]
 
−
*[http://ess-wiki.advantech.com.tw/view/How_to_Config_Multi-Display_for_RK3399_RSB710#LVDS_.2B_DP 6 LVDS + DP]
 
−
*[http://ess-wiki.advantech.com.tw/view/How_to_Config_Multi-Display_for_RK3399_RSB710#HDMI_.2B_DP 7 HDMI + DP]
 
−
*[http://ess-wiki.advantech.com.tw/view/How_to_Config_Multi-Display_for_RK3399_RSB710#Default_Support_Display 8 Default Support Display]
 
  
 
== Enter U-boot interrupt mode ==
 
== Enter U-boot interrupt mode ==
Line 31: Line 28:
 
Then you can input the following cammand to config Multi-Display.
 
Then you can input the following cammand to config Multi-Display.
  
−
== eDP + HDMI ==
+
{| border="0" cellpadding="0" cellspacing="0" width="494"
−
<pre>setenv prmry_screen edp-1920x1080
+
|- height="20"
−
setenv extend_screen hdmi-default
+
| height="20" width="72" | Module
−
saveenv
+
| width="133" | Sub Module
−
reset
+
| width="289" | Step
−
</pre>
+
|- height="60"
−
 
+
| rowspan="4" height="240" width="72" | Single
−
 
+
| width="133" | HDMI
−
 
+
| width="289" | fw_setenv display0 hdmi-default<br/>fw_setenv display1<br/>fw_setenv display2
−
or
+
|- height="60"
−
<pre>setenv prmry_screen hdmi-default
+
| height="60" width="133" | LVDS
−
setenv extend_screen edp-1920x1080
+
| width="289" | fw_setenv display0<br/>fw_setenv display1 lvds-g070vw01<br/>fw_setenv display2
−
saveenv
+
|- height="60"
−
reset
+
| height="60" width="133" | eDP
−
</pre>
+
| width="289" | fw_setenv display0 edp-1366x768<br/>fw_setenv display1<br/>fw_setenv display2
−
 
+
|- height="60"
−
== eDP + LVDS ==
+
| height="60" width="133" | MIPI
−
<pre>setenv prmry_screen edp-1920x1080
+
| width="289" | fw_setenv display0 mipi-gl0uan<br/>fw_setenv display1<br/>fw_setenv display2
−
setenv extend_screen lvds-g070vw01
+
|- height="60"
−
saveenv
+
| rowspan="5" height="300" width="72" | Dual
−
reset
+
| width="133" | HDMI+LVDS
−
</pre>
+
| width="289" | fw_setenv display0 hdmi-default<br/>fw_setenv display1 lvds-g070vw01<br/>fw_setenv display2
−
 
+
|- height="60"
−
or
+
| height="60" width="133" | HDMI+eDP
−
<pre>setenv prmry_screen lvds-g070vw01
+
| width="289" | fw_setenv display0 hdmi-default<br/>fw_setenv display1 edp-1366x768<br/>fw_setenv display2
−
setenv extend_screen edp-1920x1080
+
|- height="60"
−
saveenv
+
| height="60" width="133" | eDP+LVDS
−
reset
+
| width="289" | fw_setenv display0 edp-1366x768<br/>fw_setenv display1 lvds-g070vw01<br/>fw_setenv display2
−
</pre>
+
|- height="60"
−
 
+
| height="60" width="133" | HDMI+MIPI
−
 
+
| width="289" | fw_setenv display0 hdmi-default<br/>fw_setenv display1 mipi-gl0uan<br/>fw_setenv display2
−
 
+
|- height="60"
−
== LVDS + HDMI ==
+
| height="60" width="133" | eDP+MIPI
−
<pre>setenv prmry_screen hdmi-default
+
| width="289" | fw_setenv display0 edp-1366x768<br/>fw_setenv display1 mipi-gl0uan<br/>fw_setenv display2
−
setenv extend_screen lvds-g070vw01
+
|- height="60"
−
saveenv
+
| height="60" width="72" | Triple
−
reset
+
| width="133" | HDMI+eDP+LVDS
−
</pre>
+
| width="289" | fw_setenv display0 hdmi-default<br/>fw_setenv display1 edp-1366x768<br/>fw_setenv display2 lvds-g070vw01
−
 
+
|}
−
or
 
−
<pre>setenv prmry_screen lvds-g070vw01
 
−
setenv extend_screen hdmi-default
 
−
saveenv
 
−
reset
 
−
</pre>
 
−
 
 
−
== eDP + DP ==
 
−
<pre>setenv prmry_screen edp-1920x1080
 
−
setenv extend_screen dp-default
 
−
saveenv
 
−
reset
 
−
</pre>
 
−
 
 
  
−
 
+
== ==
−
or
 
−
<pre>setenv prmry_screen dp-default
 
−
setenv extend_screen edp-1920x1080
 
−
saveenv
 
−
reset
 
−
</pre>
 
−
 
 
−
 
 
−
 
 
−
== LVDS + DP ==
 
−
<pre>setenv prmry_screen dp-default
 
−
setenv extend_screen lvds-g070vw01
 
−
saveenv
 
−
reset
 
−
</pre>
 
−
 
 
−
or
 
−
<pre>setenv prmry_screen lvds-g070vw01
 
−
setenv extend_screen dp-default
 
−
saveenv
 
−
reset
 
−
</pre>
 
−
 
 
−
 
 
−
 
 
−
== HDMI + DP ==
 
−
<pre>setenv prmry_screen hdmi-default
 
−
setenv extend_screen dp-default
 
−
saveenv
 
−
reset
 
−
</pre>
 
−
 
 
−
or
 
−
<pre>setenv prmry_screen dp-fefault
 
−
​setenv extend_screen hdmi-default
 
−
saveenv
 
−
reset
 
−
</pre>
 
  
 
== Default Support Display ==
 
== Default Support Display ==
Line 130: Line 75:
 
|-
 
|-
 
| '''Port'''
 
| '''Port'''
−
| '''RSB4710'''
+
| '''RSB4810'''
 
|-
 
|-
 
| edp
 
| edp
Line 136: Line 81:
 
|-
 
|-
 
| lvds
 
| lvds
−
| lvds-g070vw01<br/>lvds-g150xgel05<br/>lvds-g215hvn01<br/>
+
| lvds-g070vw01<br/>lvds-g150xgel05<br/>
 
|-
 
|-
 
| hdmi
 
| hdmi
 
| hdmi-default<br/>
 
| hdmi-default<br/>
 
|-
 
|-
−
| dp
+
| mipi
−
| dp-default
+
| mipi-gl0uan<br/>
 
|}
 
|}
  
Line 171: Line 116:
 
| lvds-g150xgel05<br/>
 
| lvds-g150xgel05<br/>
 
| 1024x768
 
| 1024x768
−
|-
 
−
| lvds-g215hvn01<br/>
 
−
| 1920x1080
 
 
|}
 
|}
  

Revision as of 10:02, 24 November 2021

RK3399 has 3 VPorts. 

RK3568 Vport.png

RSB-4810 surport 4 types display : eDP、LVDS、HDMI、MIPI. 

Note：

1. HDMI、eDP、MIPI MUST be set to port 0 and port 1.

2. LVDS MUST be set to port 1 and port 2.

3.  LVDS and MIPI are alternative.



Enter U-boot interrupt mode

Connect device to debug port, and open debug console. See more : How_to_debug.

Press "ctrl + c" key before power up the device, until get the following information on debug console :  

Hit any key to stop autoboot: 0
=> <INTERRUPT>
=>

Then you can input the following cammand to config Multi-Display.

Module Sub Module Step
Single HDMI fw_setenv display0 hdmi-default
fw_setenv display1
fw_setenv display2
LVDS fw_setenv display0
fw_setenv display1 lvds-g070vw01
fw_setenv display2
eDP fw_setenv display0 edp-1366x768
fw_setenv display1
fw_setenv display2
MIPI fw_setenv display0 mipi-gl0uan
fw_setenv display1
fw_setenv display2
Dual HDMI+LVDS fw_setenv display0 hdmi-default
fw_setenv display1 lvds-g070vw01
fw_setenv display2
HDMI+eDP fw_setenv display0 hdmi-default
fw_setenv display1 edp-1366x768
fw_setenv display2
eDP+LVDS fw_setenv display0 edp-1366x768
fw_setenv display1 lvds-g070vw01
fw_setenv display2
HDMI+MIPI fw_setenv display0 hdmi-default
fw_setenv display1 mipi-gl0uan
fw_setenv display2
eDP+MIPI fw_setenv display0 edp-1366x768
fw_setenv display1 mipi-gl0uan
fw_setenv display2
Triple HDMI+eDP+LVDS fw_setenv display0 hdmi-default
fw_setenv display1 edp-1366x768
fw_setenv display2 lvds-g070vw01

Default Support Display

Port RSB4810
edp edp-1920x1080
edp-1366x768
lvds lvds-g070vw01
lvds-g150xgel05
hdmi hdmi-default
mipi mipi-gl0uan


NOTE : 

1. The name of the panel must begin with "edp-"、"lvds-" 、"hdmi-"  or “dp-”.

And it can be found in "kernel/include/dt-bindings/display/screen-timing/{LCDNAME}.dtsi" like :

lvds_g070vw01: lvds-g070vw01

2. If there is no configuration, you will get default setting :

hdmi-default  and dp-default as default setting.

3. Check your configuration in Terminal or debug console. 

cat /proc/cmdline
... prmry_screen=hdmi-default extend_screen=dp-default
LVDS Name Resolution
lvds-g070vw01
 800x480
lvds-g150xgel05
 1024x768

Using envtools in Debian/Android

Using envtools to setup envs in Debian/Android OS is very similar in uboot.

Take “eDP+HDMI”for example :

In uboot In Debian/Android
setenv prmry_screen hdmi-default
 fw_setenv prmry_screen hdmi-default
setenv extend_screen edp-1920x1080 fw_setenv extend_screen edp-1920x1080
saveenv
reset reboot

Note :

The tool "fw_setenv" will save envs automatically in Debian/Android OS, so it isn't necessary to saveen manually.

Retrieved from "https://ess-wiki.advantech.com.tw/wiki/index.php?title=How_to_Config_Multi-Display_RK3568&oldid=22589"