Difference between revisions of "EPC-R7200 user guide"

From ESS-WIKI
Jump to: navigation, search
(Created page with "<h2><b>資源特性(Features)</b></h2> <ul> <li>NXP i.MX 8M Mini processor with up to 4 Arm Cortex A53 cores</li> <li>1 x Arm Cortex-M4 core</li> <li>Onboard LPDDR4 memory...")
 
Line 1: Line 1:
−
<h2><b>資源特性(Features)</b></h2>
 
  
−
<ul>
+
== '''資源特性(Features)''' ==
−
<li>NXP i.MX 8M Mini processor with up to 4 Arm Cortex A53 cores</li>
 
−
<li>1 x Arm Cortex-M4 core</li>
 
−
<li>Onboard LPDDR4 memory and eMMC</li>
 
−
<li>1 x 4 lane MIPI-CSI,1 x Dual channel LVDS or 1 x Display Port</li>
 
−
<li>4 x USB2.0, 1 x USB 2.0 OTG, 4 x UART, 4 x I2C, 12 x GPIO, 1 x PCIe2.0, 1x Gigabit LAN</li>
 
−
<li>Support OpenGL ES 2.0/1.1 by hardware accelerators</li>
 
−
<li>Low power consumption design</li>
 
−
<li>Support Linux and Android BSP</li>
 
−
</ul>
 
  
−
<h2><b>訂購資訊(Ordering Information)</b></h2>
+
== '''訂購資訊(Ordering Information)''' ==
  
−
<p><img _fck_mw_filename="Z2.png" _fck_mw_origimgheight="81" _fck_mw_origimgwidth="873" alt="RTENOTITLE" src="/wiki/images/6/6a/Z2.png" style="vertical-align:middle;" title="RTENOTITLE" /></p>
+
&nbsp;
  
−
<h2><b>接口布局和尺寸(Layout and Sizes)</b></h2>
+
== '''接口布局和尺寸(Layout and Sizes)''' ==
  
−
<h3><b>&nbsp; ROM-5721&nbsp;接口布局圖&nbsp;Board Dimension Layout&nbsp;</b></h3>
+
=== '''&nbsp; EPC-R7200&nbsp;接口布局圖&nbsp;Board Dimension Layout&nbsp;''' ===
  
−
<p><b><img _fck_mw_filename="Z3.png" _fck_mw_origimgheight="355" _fck_mw_origimgwidth="567" alt="RTENOTITLE" src="/wiki/images/1/10/Z3.png" style="vertical-align:middle;" title="RTENOTITLE" /></b></p>
+
&nbsp;
  
−
<h3><b>&nbsp; ROM-DB5901&nbsp;接口布局圖&nbsp;Board Dimension Layout</b></h3>
+
=== &nbsp; ===
  
−
<p><img _fck_mw_filename="DB-ROM-5901 5620 carrierboard.jpg" _fck_mw_origimgheight="552" _fck_mw_origimgwidth="663" alt="RTENOTITLE" src="/wiki/images/d/d9/DB-ROM-5901_5620_carrierboard.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p>
+
=== '''&nbsp; 主板内置插针式引脚排序方式 (Pin Header defination)&nbsp;''' ===
  
−
<p><img _fck_mw_filename="ROM-DB5901 IO.jpg" _fck_mw_origimgheight="202" _fck_mw_origimgwidth="947" alt="RTENOTITLE" src="/wiki/images/1/14/ROM-DB5901_IO.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p>
+
=== '''&nbsp; Internal I/O''' ===
  
−
<h3><b>&nbsp; 主板内置插针式引脚排序方式 (Pin Header defination)&nbsp;</b></h3>
+
&nbsp;
  
−
<h3><b>&nbsp; Internal I/O</b></h3>
+
{| border="1" cellpadding="1" cellspacing="1" style="width:500px;"
 +
|-
 +
| <tbody>
 +
|-
 +
| '''Position'''
 +
| '''Description'''
 +
| '''Connector Type'''
 +
|-
 +
| BAT1
 +
| PIN Header for Battery
 +
| WAFER 8P 2.54mm 180D(M) DIP<br/> A2543WV2-8P
 +
|-
 +
| BH1
 +
| RTC Battery Holder
 +
| BATTERY HOLDER 24.9*23.4*8.9<br/> CR2032 BH800.4GG
 +
|-
 +
| CAN1
 +
| CANBus Port 1
 +
| BOX HEADER 5x2P 2.54mm 180D(M)<br/> DIP 23N6960-10S10
 +
|-
 +
| CAN2
 +
| CANBus Port 2
 +
| BOX HEADER 5x2P 2.54mm 180D(M)<br/> DIP 23N6960-10S10
 +
|-
 +
| COM1
 +
| COM Port 1
 +
| BOX HEADER 5x2P 2.54mm 180D(M)<br/> DIP 23N6960-10S10
 +
|-
 +
| COM3
 +
| COM Port 3 (Debug Port)
 +
| BOX HEADER 5x2P 2.54mm 180D(M)<br/> DIP 23N6960-10S10
 +
|-
 +
| CN4
 +
| PCIex1 Connector 1
 +
| PCIEXPRESS 36P 180D(F) DIP<br/> 2EG01817-D2D-DF
 +
|-
 +
| CN5
 +
| PCIex1 Connector 2
 +
| PCIEXPRESS 36P 180D(F) DIP<br/> 2EG01817-D2D-DF
 +
|-
 +
| CN6
 +
| PCIex1 Connector 3
 +
| PCIEXPRESS 36P 180D(F) DIP<br/> 2EG01817-D2D-DF
 +
|-
 +
| CN11
 +
| SATA Connector
 +
| Serial ATA 7P 1.27mm 180D(M) DIP<br/> WATM-07DBN4A3B8
 +
|-
 +
| CN12
 +
| SATA Power Connector
 +
| WAFER 4P 2.5mm 180D(M) DIP<br/> 24W1161-04S10-01T
 +
|-
 +
| CN22
 +
| GPIOx8 sets
 +
| PIN HEADER 10x2P 2.0mm 180D(M)<br/> DIP 21N22050
 +
|-
 +
| CN25
 +
| MXM 3.0 Connector
 +
| MXM Conn. 314P 90D(F) SMD<br/> AS0B821-S78B-7H
 +
|-
 +
| CN26
 +
| M.2 Key E Slots
 +
| NGFF 75P 0.5mm 90D(F) H=4.2mm<br/> SMD AS0BC21-S40BE
 +
|-
 +
| CN38
 +
| FAN (Reserved)
 +
| WTB Con. 3P 2.54mm 180D(M) DIP<br/> A2543WV0-3P-6T-5e
 +
|-
 +
| CN39
 +
| MIPI-CSI1 (FPC, 4-Lane
 +
| FPC 39P, 0.6mm, H0.9mm
 +
|-
 +
| CN40
 +
| MIPI-CSI0 (FPC, 2-Lane)
 +
| FPC 39P, 0.6mm, H0.9mm
 +
|-
 +
| CN41
 +
| MIPI-CSI0 (Mini-SAS, 2-Lane)
 +
| Mini SAS 36P/0.8mm/(M)/LCP/VA/G15u/<br/> S/BK/W
 +
|-
 +
| CN42
 +
| MIPI-CSI1 (Mini-SAS, 4-Lane)
 +
| Mini SAS 36P/0.8mm/(M)/LCP/VA/G15u/<br/> S/BK/W
 +
|-
 +
| ESPI_CN1
 +
| ESPI
 +
| PIN HEADER 6x2P 2.0mm180D(M) SMD<br/> 21N22050-12M00B
 +
|-
 +
| I2C_GP_1
 +
| I2C Pin Header
 +
| WAFER BOX 4P 2.00mm 180D(M) DIP<br/> 721-81-04TW00
 +
|-
 +
| I2C_CN3
 +
| Audio Codec Board
 +
| PIN HEADER 2x10P 2.54mm 180D(M)<br/> DIP 21N22564
 +
|-
 +
| LVDS0
 +
| LVDS0
 +
| Wafer 2x20P/1.25mm/(M)/NY9T/VA/GFL/<br/> S/WH/W
 +
|-
 +
| LVDS_BK_PWR
 +
| LVDS0 Back Light
 +
| WAFER BOX 5P 2.0mm 180D(M) DIP<br/> A2001WV2-5P
 +
|-
 +
| LVDS1
 +
| LVDS1
 +
| Wafer 2x20P/1.25mm/(M)/NY9T/VA/GFL/<br/> S/WH/W
 +
|-
 +
| LVDS1_BK_PWR
 +
| LVDS1 Back Light
 +
| WAFER BOX 5P 2.0mm 180D(M) DIP<br/> A2001WV2-5P
 +
|-
 +
| SD1
 +
| SD Card Slot
 +
| SD CARD 9P 90D(F) SMD WK2192CS3D-<br/> 7H
 +
|-
 +
| SPI_CN1
 +
| SPI Pin Header
 +
| PIN HEADER 4x2P 2.54mm 180D(M)<br/> SMD 21N22564
 +
|-
 +
| SW2
 +
| Reset Button
 +
| TACT SW STS-091 SMD 4P H=3.8mm
 +
|-
 +
| SW4
 +
| SLP Button
 +
| TACT SW STS-091 SMD 4P H=3.8mm
 +
|-
 +
| SW5
 +
| Power Button
 +
| TACT SW STS-091 SMD 4P H=3.8mm
 +
|-
 +
| USB0_OTG1
 +
| USB OTG
 +
| Micro USB 5P/0.65mm/(F)/NY9T/GFL/<br/> RA/S/BK/B
 +
|-
 +
| USB-4-5
 +
| USB Port 4, Port 5
 +
| PIN HEADER 2x5P 2.0mm 180D(M)<br/> SMD 21N22050
 +
|-
 +
| </tbody>
 +
|}
  
−
<p><img _fck_mw_filename="ROM-DB5901 IO2.jpg" _fck_mw_origimgheight="732" _fck_mw_origimgwidth="812" alt="RTENOTITLE" src="/wiki/images/3/3f/ROM-DB5901_IO2.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p>
+
=== '''&nbsp; Rear I/O&nbsp;''' ===
  
−
<table border="1" cellpadding="1" cellspacing="1" style="width:500px;">
+
'''<img _fck_mw_filename="ROM-DB5901 RearIO.jpg" _fck_mw_origimgheight="226" _fck_mw_origimgwidth="778" alt="RTENOTITLE" src="/wiki/images/f/ff/ROM-DB5901_RearIO.jpg" style="vertical-align:middle;" title="RTENOTITLE" />'''
−
<tbody>
 
−
<tr>
 
−
<td><b>Position</b></td>
 
−
<td><b>Description</b></td>
 
−
<td><b>Connector Type</b></td>
 
−
</tr>
 
−
<tr>
 
−
<td>BAT1</td>
 
−
<td>PIN Header for Battery</td>
 
−
<td>WAFER 8P 2.54mm 180D(M) DIP<br />
 
−
A2543WV2-8P</td>
 
−
</tr>
 
−
<tr>
 
−
<td>BH1</td>
 
−
<td>RTC Battery Holder</td>
 
−
<td>BATTERY HOLDER 24.9*23.4*8.9<br />
 
−
CR2032 BH800.4GG</td>
 
−
</tr>
 
−
<tr>
 
−
<td>CAN1</td>
 
−
<td>CANBus Port 1</td>
 
−
<td>BOX HEADER 5x2P 2.54mm 180D(M)<br />
 
−
DIP 23N6960-10S10</td>
 
−
</tr>
 
−
<tr>
 
−
<td>CAN2</td>
 
−
<td>CANBus Port 2</td>
 
−
<td>BOX HEADER 5x2P 2.54mm 180D(M)<br />
 
−
DIP 23N6960-10S10</td>
 
−
</tr>
 
−
<tr>
 
−
<td>COM1</td>
 
−
<td>COM Port 1</td>
 
−
<td>BOX HEADER 5x2P 2.54mm 180D(M)<br />
 
−
DIP 23N6960-10S10</td>
 
−
</tr>
 
−
<tr>
 
−
<td>COM3</td>
 
−
<td>COM Port 3 (Debug Port)</td>
 
−
<td>BOX HEADER 5x2P 2.54mm 180D(M)<br />
 
−
DIP 23N6960-10S10</td>
 
−
</tr>
 
−
<tr>
 
−
<td>CN4</td>
 
−
<td>PCIex1 Connector 1</td>
 
−
<td>PCIEXPRESS 36P 180D(F) DIP<br />
 
−
2EG01817-D2D-DF</td>
 
−
</tr>
 
−
<tr>
 
−
<td>CN5</td>
 
−
<td>PCIex1 Connector 2</td>
 
−
<td>PCIEXPRESS 36P 180D(F) DIP<br />
 
−
2EG01817-D2D-DF</td>
 
−
</tr>
 
−
<tr>
 
−
<td>CN6</td>
 
−
<td>PCIex1 Connector 3</td>
 
−
<td>PCIEXPRESS 36P 180D(F) DIP<br />
 
−
2EG01817-D2D-DF</td>
 
−
</tr>
 
−
<tr>
 
−
<td>CN11</td>
 
−
<td>SATA Connector</td>
 
−
<td>Serial ATA 7P 1.27mm 180D(M) DIP<br />
 
−
WATM-07DBN4A3B8</td>
 
−
</tr>
 
−
<tr>
 
−
<td>CN12</td>
 
−
<td>SATA Power Connector</td>
 
−
<td>WAFER 4P 2.5mm 180D(M) DIP<br />
 
−
24W1161-04S10-01T</td>
 
−
</tr>
 
−
<tr>
 
−
<td>CN22</td>
 
−
<td>GPIOx8 sets</td>
 
−
<td>PIN HEADER 10x2P 2.0mm 180D(M)<br />
 
−
DIP 21N22050</td>
 
−
</tr>
 
−
<tr>
 
−
<td>CN25</td>
 
−
<td>MXM 3.0 Connector</td>
 
−
<td>MXM Conn. 314P 90D(F) SMD<br />
 
−
AS0B821-S78B-7H</td>
 
−
</tr>
 
−
<tr>
 
−
<td>CN26</td>
 
−
<td>M.2 Key E Slots</td>
 
−
<td>NGFF 75P 0.5mm 90D(F) H=4.2mm<br />
 
−
SMD AS0BC21-S40BE</td>
 
−
</tr>
 
−
<tr>
 
−
<td>CN38</td>
 
−
<td>FAN (Reserved)</td>
 
−
<td>WTB Con. 3P 2.54mm 180D(M) DIP<br />
 
−
A2543WV0-3P-6T-5e</td>
 
−
</tr>
 
−
<tr>
 
−
<td>CN39</td>
 
−
<td>MIPI-CSI1 (FPC, 4-Lane</td>
 
−
<td>FPC 39P, 0.6mm, H0.9mm</td>
 
−
</tr>
 
−
<tr>
 
−
<td>CN40</td>
 
−
<td>MIPI-CSI0 (FPC, 2-Lane)</td>
 
−
<td>FPC 39P, 0.6mm, H0.9mm</td>
 
−
</tr>
 
−
<tr>
 
−
<td>CN41</td>
 
−
<td>MIPI-CSI0 (Mini-SAS, 2-Lane)</td>
 
−
<td>Mini SAS 36P/0.8mm/(M)/LCP/VA/G15u/<br />
 
−
S/BK/W</td>
 
−
</tr>
 
−
<tr>
 
−
<td>CN42</td>
 
−
<td>MIPI-CSI1 (Mini-SAS, 4-Lane)</td>
 
−
<td>Mini SAS 36P/0.8mm/(M)/LCP/VA/G15u/<br />
 
−
S/BK/W</td>
 
−
</tr>
 
−
<tr>
 
−
<td>ESPI_CN1</td>
 
−
<td>ESPI</td>
 
−
<td>PIN HEADER 6x2P 2.0mm180D(M) SMD<br />
 
−
21N22050-12M00B</td>
 
−
</tr>
 
−
<tr>
 
−
<td>I2C_GP_1</td>
 
−
<td>I2C Pin Header</td>
 
−
<td>WAFER BOX 4P 2.00mm 180D(M) DIP<br />
 
−
721-81-04TW00</td>
 
−
</tr>
 
−
<tr>
 
−
<td>I2C_CN3</td>
 
−
<td>Audio Codec Board</td>
 
−
<td>PIN HEADER 2x10P 2.54mm 180D(M)<br />
 
−
DIP 21N22564</td>
 
−
</tr>
 
−
<tr>
 
−
<td>LVDS0</td>
 
−
<td>LVDS0</td>
 
−
<td>Wafer 2x20P/1.25mm/(M)/NY9T/VA/GFL/<br />
 
−
S/WH/W</td>
 
−
</tr>
 
−
<tr>
 
−
<td>LVDS_BK_PWR</td>
 
−
<td>LVDS0 Back Light</td>
 
−
<td>WAFER BOX 5P 2.0mm 180D(M) DIP<br />
 
−
A2001WV2-5P</td>
 
−
</tr>
 
−
<tr>
 
−
<td>LVDS1</td>
 
−
<td>LVDS1</td>
 
−
<td>Wafer 2x20P/1.25mm/(M)/NY9T/VA/GFL/<br />
 
−
S/WH/W</td>
 
−
</tr>
 
−
<tr>
 
−
<td>LVDS1_BK_PWR</td>
 
−
<td>LVDS1 Back Light</td>
 
−
<td>WAFER BOX 5P 2.0mm 180D(M) DIP<br />
 
−
A2001WV2-5P</td>
 
−
</tr>
 
−
<tr>
 
−
<td>SD1</td>
 
−
<td>SD Card Slot</td>
 
−
<td>SD CARD 9P 90D(F) SMD WK2192CS3D-<br />
 
−
7H</td>
 
−
</tr>
 
−
<tr>
 
−
<td>SPI_CN1</td>
 
−
<td>SPI Pin Header</td>
 
−
<td>PIN HEADER 4x2P 2.54mm 180D(M)<br />
 
−
SMD 21N22564</td>
 
−
</tr>
 
−
<tr>
 
−
<td>SW2</td>
 
−
<td>Reset Button</td>
 
−
<td>TACT SW STS-091 SMD 4P H=3.8mm</td>
 
−
</tr>
 
−
<tr>
 
−
<td>SW4</td>
 
−
<td>SLP Button</td>
 
−
<td>TACT SW STS-091 SMD 4P H=3.8mm</td>
 
−
</tr>
 
−
<tr>
 
−
<td>SW5</td>
 
−
<td>Power Button</td>
 
−
<td>TACT SW STS-091 SMD 4P H=3.8mm</td>
 
−
</tr>
 
−
<tr>
 
−
<td>USB0_OTG1</td>
 
−
<td>USB OTG</td>
 
−
<td>Micro USB 5P/0.65mm/(F)/NY9T/GFL/<br />
 
−
RA/S/BK/B</td>
 
−
</tr>
 
−
<tr>
 
−
<td>USB-4-5</td>
 
−
<td>USB Port 4, Port 5</td>
 
−
<td>PIN HEADER 2x5P 2.0mm 180D(M)<br />
 
−
SMD 21N22050</td>
 
−
</tr>
 
−
</tbody>
 
−
</table>
 
  
−
<h3><b>&nbsp; Rear I/O&nbsp;</b></h3>
+
{| border="1" cellpadding="1" cellspacing="1" style="width:500px;"
 +
|-
 +
| <tbody>
 +
|-
 +
| '''Position'''
 +
| '''Description'''
 +
| '''Name'''
 +
|-
 +
| DCIN
 +
| DC Jack
 +
| A
 +
|-
 +
| CN15A
 +
| UART Port 0
 +
| B
 +
|-
 +
| CN15B
 +
| UART Port 2
 +
| C
 +
|-
 +
| CN1A
 +
| DP Port
 +
| D
 +
|-
 +
| CN1B
 +
| HDMI Port
 +
| E
 +
|-
 +
| CN33
 +
| Type C Controller Programming Header (Reserved Only)
 +
| F
 +
|-
 +
| CN34
 +
| USB Type C
 +
| G
 +
|-
 +
| CN8
 +
| GbE Ethernet Connector Port
 +
| H
 +
|-
 +
| CN3
 +
| USB Port 1/ 2
 +
| I
 +
|-
 +
| Audio1
 +
| MIC Input/ Audio Output
 +
| J
 +
|-
 +
| </tbody>
 +
|}
  
−
<p><b><img _fck_mw_filename="ROM-DB5901 RearIO.jpg" _fck_mw_origimgheight="226" _fck_mw_origimgwidth="778" alt="RTENOTITLE" src="/wiki/images/f/ff/ROM-DB5901_RearIO.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></b></p>
+
=== '''&nbsp; 接口引脚定義 (Pin definitions)''' ===
  
−
<table border="1" cellpadding="1" cellspacing="1" style="width:500px;">
+
=== '''&nbsp; 机械尺寸&nbsp; ('''Mechanical Characteristics) ===
−
<tbody>
 
−
<tr>
 
−
<td><b>Position</b></td>
 
−
<td><b>Description</b></td>
 
−
<td><b>Name</b></td>
 
−
</tr>
 
−
<tr>
 
−
<td>DCIN</td>
 
−
<td>DC Jack</td>
 
−
<td>A</td>
 
−
</tr>
 
−
<tr>
 
−
<td>CN15A</td>
 
−
<td>UART Port 0</td>
 
−
<td>B</td>
 
−
</tr>
 
−
<tr>
 
−
<td>CN15B</td>
 
−
<td>UART Port 2</td>
 
−
<td>C</td>
 
−
</tr>
 
−
<tr>
 
−
<td>CN1A</td>
 
−
<td>DP Port</td>
 
−
<td>D</td>
 
−
</tr>
 
−
<tr>
 
−
<td>CN1B</td>
 
−
<td>HDMI Port</td>
 
−
<td>E</td>
 
−
</tr>
 
−
<tr>
 
−
<td>CN33</td>
 
−
<td>Type C Controller Programming Header (Reserved Only)</td>
 
−
<td>F</td>
 
−
</tr>
 
−
<tr>
 
−
<td>CN34</td>
 
−
<td>USB Type C</td>
 
−
<td>G</td>
 
−
</tr>
 
−
<tr>
 
−
<td>CN8</td>
 
−
<td>GbE Ethernet Connector Port</td>
 
−
<td>H</td>
 
−
</tr>
 
−
<tr>
 
−
<td>CN3</td>
 
−
<td>USB Port 1/ 2</td>
 
−
<td>I</td>
 
−
</tr>
 
−
<tr>
 
−
<td>Audio1</td>
 
−
<td>MIC Input/ Audio Output</td>
 
−
<td>J</td>
 
−
</tr>
 
−
</tbody>
 
−
</table>
 
  
−
<h3><b>&nbsp; 接口引脚定義 (Pin definitions)</b></h3>
+
'''EPC-R7200&nbsp;'''
  
−
<ul>
+
&nbsp;
−
<li><a href="%E9%9B%BB%E6%B1%A0%28BAT1%29%20%26%20%E9%9B%BB%E6%B1%A0%E6%89%A3%28BH1%29">電池(BAT1)&nbsp;&amp; 電池扣(BH1)</a></li>
 
−
<li><a href="CAN%28CAN1%2CCAN2%29">CAN(CAN1,CAN2)</a></li>
 
−
<li><a href="%E4%B8%B2%E5%8F%A3%28COM%20DB%28COM3%29%E3%80%81COM0%E3%80%81COM1%20%E3%80%81COM2%29">串口(COM_DB(COM3)、COM1、UART0&nbsp;、UART2)</a></li>
 
−
<li><a href="%E6%98%BE%E7%A4%BA%E6%8E%A5%E5%8F%A3%28LVDS%E3%80%81HDMI%29%20LAN%E6%8E%A5%E5%8F%A3%20USB%E6%8E%A5%E5%8F%A3%28USB1-2%E3%80%81USB3-4%E3%80%81USB%20OTG%29%20%E9%9F%B3%E9%A2%91%E6%8E%A5%E5%8F%A3%20%E7%94%B5%E6%BA%90%E5%8F%8A%E6%8C%87%E7%A4%BA%E7%81%AF%E5%92%8C%E5%BC%80%E5%85%B3%E6%9C%BA%E5%A4%8D%E4%BD%8D%E6%8C%89%E9%92%AE%20GPIO%E6%8E%A5%E5%8F%A3%20MINI%20PCIE%E6%8E%A5%E5%8F%A3%20M.2%E6%8E%A5%E5%8F%A3%20SPI%E3%80%81I2C%20%E6%8E%A5%E5%8F%A3">显示接口(LVDS、LVDS Backlight、HDMI、DP)</a></li>
 
−
<li><a href="LAN%E6%8E%A5%E5%8F%A3">LAN接口(LAN)</a></li>
 
−
<li><a href="USB%E6%8E%A5%E5%8F%A3%28USB1-2%E3%80%81USB%20Type%20C%E3%80%81USB%20OTG%29">USB接口(USB1-2、USB-4-5、USB Type C、USB OTG)</a></li>
 
−
<li><a href="%E9%9F%B3%E9%A2%91%E6%8E%A5%E5%8F%A3%28Audio%29">音频接口(Audio Output &amp;Audio Codec)</a></li>
 
−
<li><a href="%E7%94%B5%E6%BA%90%E5%8F%8A%E6%8C%87%E7%A4%BA%E7%81%AF%E5%92%8C%E5%BC%80%E5%85%B3%E6%9C%BA%E5%A4%8D%E4%BD%8D%E6%8C%89%E9%92%AE%28Power%20%E3%80%81LED%E3%80%81Power%20Button%E3%80%81Reset%20Button%E3%80%81Sleep%20Button%29">电源及指示灯和开关机复位按钮(Power&nbsp;、LED、Power Button、Reset Button、Sleep Button)&nbsp;</a></li>
 
−
<li><a href="GPIO%E6%8E%A5%E5%8F%A3">GPIO接口</a></li>
 
−
<li><a href="MINI%20PCIE%E6%8E%A5%E5%8F%A3%20M.2%E6%8E%A5%E5%8F%A3%20SPI%E3%80%81I2C%20%E6%8E%A5%E5%8F%A3">MINI_PCIE接口_M.2接口_SPI、I2C_接口</a></li>
 
−
</ul>
 
  
−
<h3><b>&nbsp; 机械尺寸&nbsp; (</b>Mechanical Characteristics)</h3>
+
&nbsp;
  
−
<p><b>ROM-5721&nbsp;</b></p>
+
&nbsp;
  
−
<p><b><img _fck_mw_filename="ROM-5620 Mechanical Specifications1.jpg" _fck_mw_origimgheight="522" _fck_mw_origimgwidth="757" alt="RTENOTITLE" src="/wiki/images/6/6a/ROM-5620_Mechanical_Specifications1.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></b></p>
+
&nbsp;
  
−
<p><b><img _fck_mw_filename="ROM-5620 Mechanical Specifications2.jpg" _fck_mw_origimgheight="527" _fck_mw_origimgwidth="613" alt="RTENOTITLE" src="/wiki/images/9/96/ROM-5620_Mechanical_Specifications2.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></b></p>
+
----
  
−
<p>&nbsp;</p>
+
== '''快速入门 (Quick Start)''' ==
  
−
<p>&nbsp;</p>
+
=== '''&nbsp; 系统下载 (OS Download)''' ===
  
−
<p>&nbsp;</p>
+
*'''Linux系统 (Linux OS)'''
  
−
<hr />
+
&nbsp;
−
<h2><b>快速入门 (Quick Start)</b></h2>
 
  
−
<h3><b>&nbsp; 系统下载 (OS Download)</b></h3>
+
----
  
−
<ul>
+
=== '''&nbsp; Linux&nbsp;燒錄方法 (Linux Flash eMMC Method)''' ===
−
<li><b>Linux系统 (Linux OS)</b></li>
 
−
</ul>
 
  
−
<p><b>​Yocto 2.5:&nbsp;</b><a alt="http://ess-wiki.advantech.com.tw/view/IoTGateway/BSP/Linux/iMX8/OS_Support_List" href="http://ess-wiki.advantech.com.tw/view/IoTGateway/BSP/Linux/iMX8/OS_Support_List" title="http://ess-wiki.advantech.com.tw/view/IoTGateway/BSP/Linux/iMX8/OS_Support_List">IoTGateway/BSP/Linux/iMX8/OS Support List - ESS-WIKI (advantech.com.tw)</a></p>
+
'''使用Flash tool 燒錄鏡像到eMMC (Flash image into eMMC by Flash Tools)&nbsp;'''
  
−
<p><b>Yocto 3.0:</b><a href="IoTGateway%2FBSP%2FLinux%2FiMX8%2FOS%20Support%20List%203.0">IoTGateway/BSP/Linux/iMX8/OS Support List 3.0</a></p>
+
&nbsp;
  
−
<hr />
+
=== '''&nbsp; Debug 串口調試 (Debug port Setting)''' ===
−
<h3><b>&nbsp; Linux&nbsp;燒錄方法 (Linux Flash eMMC Method)</b></h3>
 
  
−
<p><b>使用Flash tool 燒錄鏡像到eMMC (Flash image into eMMC by Flash Tools)&nbsp;</b></p>
+
以 Tera Term&nbsp;&nbsp;为例介绍如何使用串口调试功能
−
 
+
<pre>   Baud Rate波特率：115200
−
<p>Step0: 檢查SD卡在Linux 環境的代號 (check SD card symbol in Linux system)&nbsp;</p>
 
−
 
 
−
<p><img _fck_mw_filename="Z3.jpg" _fck_mw_origimgheight="74" _fck_mw_origimgwidth="714" alt="RTENOTITLE" src="/wiki/images/4/4d/Z3.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p>
 
−
 
 
−
<p>&nbsp;</p>
 
−
 
 
−
<p>Step1: 創造一張可開機的SD 卡&nbsp;(Create&nbsp;a bootable SD card)</p>
 
−
 
 
−
<p><img _fck_mw_filename="Z4.jpg" _fck_mw_origimgheight="26" _fck_mw_origimgwidth="1307" alt="RTENOTITLE" src="/wiki/images/e/e0/Z4.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p>
 
−
 
 
−
<p>Step2: 將可開機的SD 卡插入底板SD卡卡槽(Plug the SD card into Carrier board &#39;s SD card slot)</p>
 
−
 
 
−
<p>&nbsp;<img _fck_mw_filename="CarrierboardSDsolt.jpg" _fck_mw_origimgheight="492" _fck_mw_origimgwidth="362" alt="RTENOTITLE" src="/wiki/images/9/92/CarrierboardSDsolt.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p>
 
−
 
 
−
<p>Step4: 確認開機選擇指撥開關 (Check the boot switch)</p>
 
−
 
 
−
<p>&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;SD 卡開機模式(SD boot mode):</p>
 
−
 
 
−
<p>&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;<img _fck_mw_filename="SDBootupSwitch.jpg" _fck_mw_origimgheight="518" _fck_mw_origimgwidth="388" alt="RTENOTITLE" src="/wiki/images/9/94/SDBootupSwitch.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p>
 
−
 
 
−
<p>&nbsp;</p>
 
−
 
 
−
<p>Step3:打開電源 和 終端機&nbsp;(Turn on the Power &amp; Terminal)</p>
 
−
 
 
−
<p><img _fck_mw_filename="Z5.jpg" _fck_mw_origimgheight="447" _fck_mw_origimgwidth="1168" alt="RTENOTITLE" src="/wiki/images/0/09/Z5.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p>
 
−
 
 
−
<p>&nbsp;</p>
 
−
 
 
−
<p>Step4: 解壓縮flash tools 檔案,並複製到U盤中(Unzip the flash tools file , then copy to USB Disk)&nbsp;</p>
 
−
 
 
−
<p>&nbsp; &nbsp; 解壓縮(Unzip the file )&nbsp;</p>
 
−
 
 
−
<p><img _fck_mw_filename="Z6.jpg" _fck_mw_origimgheight="125" _fck_mw_origimgwidth="909" alt="RTENOTITLE" src="/wiki/images/e/e1/Z6.jpg" style="vertical-align:middle;" title="RTENOTITLE" />&nbsp; &nbsp; &nbsp; &nbsp;</p>
 
−
 
 
−
<p>複製檔案到U盤中 (Copy the flash file to USB Disk)&nbsp;</p>
 
−
 
 
−
<p>&nbsp; 1. 插入U盤到你的Ubuntu 電腦上 (Plug the USB Disk into you Linux PC</p>
 
−
 
 
−
<p>&nbsp; 2. 檢視U盤在Ubuntu 系統代號 (Check the USB Disk&#39;s symbol in Ubuntu System)&nbsp;</p>
 
−
 
 
−
<p>&nbsp;<img _fck_mw_filename="Z7.jpg" _fck_mw_origimgheight="146" _fck_mw_origimgwidth="932" alt="RTENOTITLE" src="/wiki/images/b/b4/Z7.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p>
 
−
 
 
−
<p>&nbsp;3. 掛載U盤在Ubuntu 系統中 (Mount the&nbsp;USB Disk&#39;s in Ubuntu System)&nbsp;</p>
 
−
 
 
−
<p><img _fck_mw_filename="Z8.jpg" _fck_mw_origimgheight="197" _fck_mw_origimgwidth="874" alt="RTENOTITLE" src="/wiki/images/f/f6/Z8.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p>
 
−
 
 
−
<p>4. 複製檔案到U盤(Copy the file to USB disk)</p>
 
−
 
 
−
<p><img _fck_mw_filename="Z9.jpg" _fck_mw_origimgheight="377" _fck_mw_origimgwidth="919" alt="RTENOTITLE" src="/wiki/images/5/59/Z9.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p>
 
−
 
 
−
<p>5. 將U盤連接到ROM-5721系統, 進入flash tool下的mk_inand資料夾, 執行指令./mksd-linux.sh /dev/mmcblk2燒錄image到eMMC (Connect USB Disk to ROM-5721 system, browser to mk_inand folder and execute flash shell script &quot;./mksd-linux.sh /dev/mmcblk2&quot;</p>
 
−
 
 
−
<table border="1" cellpadding="1" cellspacing="1" style="width:500px;">
 
−
<tbody>
 
−
<tr>
 
−
<td>ROM-5721</td>
 
−
<td>&nbsp;</td>
 
−
</tr>
 
−
<tr>
 
−
<td>SD card</td>
 
−
<td>/dev/mmcblk1</td>
 
−
</tr>
 
−
<tr>
 
−
<td>eMMC</td>
 
−
<td>/dev/mmcblk2</td>
 
−
</tr>
 
−
</tbody>
 
−
</table>
 
−
 
 
−
<p><img _fck_mw_filename="Z10.jpg" _fck_mw_origimgheight="483" _fck_mw_origimgwidth="1059" alt="RTENOTITLE" src="/wiki/images/d/d2/Z10.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p>
 
−
 
 
−
<p>6. 切換開機switch 1:on 2,3,4,5,6:off來設定成從eMMC開機(Change boot switch to &quot;1:on 2,3,4,5,6:off&quot; to boot from eMMC. Reboot system).</p>
 
−
 
 
−
<h3><b>&nbsp; Debug 串口調試 (Debug port Setting)</b></h3>
 
−
 
 
−
<p>以 Tera Term&nbsp;&nbsp;为例介绍如何使用串口调试功能</p>
 
−
 
 
−
<pre>
 
−
  Baud Rate波特率：115200
 
 
   Data 数据位：8
 
   Data 数据位：8
 
   Parity 奇偶校验：无
 
   Parity 奇偶校验：无
Line 432: Line 259:
 
   Flow Control流控：无</pre>
 
   Flow Control流控：无</pre>
  
−
<dl>
+
:&nbsp;  
−
<dd>&nbsp;</dd>
 
−
</dl>
 
−
 
 
−
<p>Tera Term Tool&nbsp;</p>
 
−
 
 
−
<p><img _fck_mw_filename="TeraTerm 2021-09-10 140930n.jpg" _fck_mw_origimgheight="428" _fck_mw_origimgwidth="700" alt="RTENOTITLE" src="/wiki/images/2/25/TeraTerm_2021-09-10_140930n.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p>
 
−
 
 
−
<p><img _fck_mw_filename="TeraTerm12021-09-10 141114n.jpg" _fck_mw_origimgheight="391" _fck_mw_origimgwidth="609" alt="RTENOTITLE" src="/wiki/images/6/6d/TeraTerm12021-09-10_141114n.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p>
 
−
 
 
−
<p>Check the Sriel port in Device Manager (查看PC端的串口号)：</p>
 
−
 
 
−
<p>if you can not identify the Serial device , please check your serial driver.&nbsp;</p>
 
−
 
 
−
<p><img _fck_mw_filename="COMportinx862021-09-10 141610.jpg" _fck_mw_origimgheight="640" _fck_mw_origimgwidth="588" alt="RTENOTITLE" src="/wiki/images/9/99/COMportinx862021-09-10_141610.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p>
 
−
 
 
−
<p>Debug port connection (串口連接)&nbsp;</p>
 
−
 
 
−
<p><img _fck_mw_filename="Debugcom3nn 2021-09-10 140320.jpg" _fck_mw_origimgheight="500" _fck_mw_origimgwidth="203" alt="RTENOTITLE" src="/wiki/images/e/e3/Debugcom3nn_2021-09-10_140320.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p>
 
−
 
 
−
<p>&nbsp;</p>
 
−
 
 
−
<p>Log into Terminal&nbsp; Tool (进入串口调试终端)：</p>
 
−
 
 
−
<p><img _fck_mw_filename="Z15.jpg" _fck_mw_origimgheight="320" _fck_mw_origimgwidth="1057" alt="RTENOTITLE" src="/wiki/images/9/9c/Z15.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p>
 
−
 
 
−
<hr />
 
−
<h2><b>Linux系统的基本使用(Linux&nbsp;System Basic Operating Method)</b></h2>
 
−
 
 
−
<h3><b>&nbsp; UUU 使用方法(USB Connection (OTG port))</b></h3>
 
−
 
 
−
<p>Download uuu tool from (Release [<a alt="https://github.com/ADVANTECH-Corp/uuu/releases/tag/v20200619" href="https://github.com/ADVANTECH-Corp/uuu/releases/tag/v20200619" title="https://github.com/ADVANTECH-Corp/uuu/releases/tag/v20200619">ADV</a>v20200619 &middot; ADVANTECH-Corp/uuu &middot; GitHub]) or in the folder.</p>
 
−
 
 
−
<p>The &ldquo;imx-boot-imx8mmrom5721a1-sd.bin-flash_evk&rdquo; file be included in 5721A1AIM20LIV90XXX_iMX8MM_misc.tgz. XXX is the version.</p>
 
−
 
 
−
<p><b>Connect USB cable to USB OTG port.</b></p>
 
−
 
 
−
<p><b>Change boot switch to &quot;4:on 1,2,3,5,6:off&quot; to boot from force recovery mode.</b></p>
 
−
 
 
−
<p><img _fck_mw_filename="Z11.jpg" _fck_mw_origimgheight="216" _fck_mw_origimgwidth="1044" alt="RTENOTITLE" src="/wiki/images/7/70/Z11.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p>
 
−
 
 
−
<p>Type command below to flash eMMC:</p>
 
−
 
 
−
<p><img _fck_mw_filename="Z12.jpg" _fck_mw_origimgheight="179" _fck_mw_origimgwidth="1352" alt="RTENOTITLE" src="/wiki/images/a/a2/Z12.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p>
 
−
 
 
−
<h3><b>&nbsp; Display Setting (ROM-5721)</b></h3>
 
−
 
 
−
<p><b>&nbsp; &nbsp; &nbsp; U-boot&nbsp;Command&nbsp;:</b></p>
 
−
 
 
−
<p>&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; setenv fdt_file xxxx.dtb<br />
 
−
&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; env save<br />
 
−
&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; boot</p>
 
−
 
 
−
<p>&nbsp; &nbsp; &nbsp;U-boot load fefault setting:</p>
 
−
 
 
−
<p>&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp;env default -a<br />
 
−
&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; env save<br />
 
−
&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; reset</p>
 
−
 
 
−
<ul>
 
−
<li>Display: Default support g070vw01 LVDS panel on LVDS0
 
−
<ul>
 
−
<li>DSI to LVDS
 
−
<ul>
 
−
<li>g070vw01(LVDS0)
 
−
<ul>
 
−
<li>adv-imx8mm-rom5721-a1.dtb</li>
 
−
</ul>
 
−
</li>
 
−
<li>g150xgel05(LVDS0)
 
−
<ul>
 
−
<li>adv-imx8mm-rom5721-a1-dsi2lvds-g150xgel05.dtb</li>
 
−
</ul>
 
−
</li>
 
−
<li>g215hvn01(LVDS0+LVDS1,dual channel)
 
−
<ul>
 
−
<li>adv-imx8mm-rom5721-a1-dsi2lvds-g215hvn01.dtb</li>
 
−
</ul>
 
−
</li>
 
−
</ul>
 
−
</li>
 
−
<li>DSI to DP
 
−
<ul>
 
−
<li>adv-imx8mm-rom5721-a1-dsi2dp.dtb</li>
 
−
</ul>
 
−
</li>
 
−
<li>DSI to HDMI(LVDS0)
 
−
<ul>
 
−
<li>adv-imx8mm-rom5721-a1-adv7535.dtb</li>
 
−
</ul>
 
−
</li>
 
−
<li>DSI
 
−
<ul>
 
−
<li>auog101uan02(LVDS0)
 
−
<ul>
 
−
<li>adv-imx8mm-rom5721-a1-auog101uan02.dtb</li>
 
−
</ul>
 
−
</li>
 
−
</ul>
 
−
</li>
 
−
</ul>
 
−
</li>
 
−
<li>M.2 SDIO
 
−
<ul>
 
−
<li>Adjust CN43~CN48</li>
 
−
<li>adv-imx8mm-rom5721-a1-m2-sdio.dtb</li>
 
−
</ul>
 
−
</li>
 
−
<li>M.2 I2S
 
−
<ul>
 
−
<li>adv-imx8mm-rom5721-a1-m2-i2s.dtb</li>
 
−
</ul>
 
−
</li>
 
−
</ul>
 
−
 
 
−
<h3><b>&nbsp; 乙太網路使用方法(Ethernent Testing Method)</b></h3>
 
−
 
 
−
<p><b>Command&nbsp;: ifconfig&nbsp;</b></p>
 
−
 
 
−
<p><img _fck_mw_filename="Z13.jpg" _fck_mw_origimgheight="487" _fck_mw_origimgwidth="861" alt="RTENOTITLE" src="/wiki/images/b/bb/Z13.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p>
 
−
 
 
−
<p><b>Command: Ping - I eth1 8.8.8.8&nbsp; or Ping - I eth0 8.8.8.8&nbsp;&nbsp;</b></p>
 
−
 
 
−
<p><img _fck_mw_filename="Z14.jpg" _fck_mw_origimgheight="241" _fck_mw_origimgwidth="781" alt="RTENOTITLE" src="/wiki/images/1/10/Z14.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p>
 
−
 
 
−
<h3><b>&nbsp; WiFi使用方法(WIFI Testing Method)</b></h3>
 
−
 
 
−
<pre>
 
−
Command&amp;nbsp;:
 
−
 
 
−
# killall wpa_supplicant
 
−
# ifconfig wlan0 up
 
−
# iwlist mlan0 scan
 
−
WEP:
 
−
# iwconfig mlan0 txpower auto essid &quot;SSID&quot; channel 4
 
−
# udhcpc -i mlan0
 
−
 
 
−
WPA/WPA2:
 
−
# wpa_passphrase &quot;SSID&quot; &gt; wpa.conf
 
−
Type password
 
−
# wpa_supplicant -B -Dwext -imlan0 -c/home/root/wpa.conf
 
−
# udhcpc -i mlan0
 
−
 
 
−
ping 8.8.8.8
 
−
PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
 
−
64 bytes from 8.8.8.8: icmp_seq=1 ttl=54 time=2.10 ms
 
−
64 bytes from 8.8.8.8: icmp_seq=2 ttl=54 time=2.10 ms</pre>
 
−
 
 
−
<p><img _fck_mw_filename="Z16.jpg" _fck_mw_origimgheight="344" _fck_mw_origimgwidth="663" alt="RTENOTITLE" src="/wiki/images/1/11/Z16.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p>
 
−
 
 
−
<h3><b>&nbsp; GPIO使用方法(GPIO Operating Method)</b></h3>
 
−
 
 
−
<p><img _fck_mw_filename="Z17.jpg" _fck_mw_origimgheight="475" _fck_mw_origimgwidth="710" alt="RTENOTITLE" src="/wiki/images/9/91/Z17.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p>
 
−
 
 
−
<p>&nbsp;</p>
 
−
 
 
−
<pre>
 
−
Loop-back Test (Take GPIO0 and GPIO2 as examples) 
 
−
 
 
−
Step 1: Connect GPIO0 and GPIO2
 
−
Step 2: Export GPIO interface
 
−
 
 
−
root@imx8mmrom5721a1: ~# echo 496 &gt; /sys/class/gpio/export
 
−
root@imx8mmrom5721a1: ~# echo 497 &gt; /sys/class/gpio/export
 
−
 
 
−
Step 3: Set direction
 
−
 
 
−
root@imx8mmrom5721a1: ~# echo out &gt; /sys/class/gpio/gpio1/direction
 
−
root@imx8mmrom5721a1: ~# echo in &gt; /sys/class/gpio/gpio2/direction
 
−
 
 
−
Step 4: Read value and set output value then check
 
−
 
 
−
root@imx8mmrom5721a1: ~# cat /sys/class/gpio/gpio2/value
 
−
0
 
−
root@imx8mmrom5721a1: ~# echo 1 &gt; /sys/class/gpio/gpio1/value
 
−
root@imx8mmrom5721a1: ~# cat /sys/class/gpio/gpio2/value
 
−
1</pre>
 
−
 
 
−
<h3><b>&nbsp; 串口使用方法(Serial Port Operating&nbsp;Method)</b></h3>
 
−
 
 
−
<p>RS-232 Test</p>
 
−
 
 
−
<p>CN15上(SER0/UART3): /dev/ttymxc2</p>
 
−
 
 
−
<p>CN15 下(SER2/UART1): /dev/ttymxc0</p>
 
−
 
 
−
<p>COM 3&nbsp;(A53 debug/SER3/UART2): /dev/ttymxc1</p>
 
−
 
 
−
<p>COM 1&nbsp;(M4 debug/SER1/UART4): /dev/ttymxc3</p>
 
−
 
 
−
<p>SW7 Setting (SW7設置)&nbsp;</p>
 
−
 
 
−
<p><img _fck_mw_filename="SW6&amp;7settingn.jpeg" alt="RTENOTITLE" src="/wiki/images/2/21/SW6%267settingn.jpeg" style="vertical-align:middle;" title="RTENOTITLE" /></p>
 
−
 
 
−
<p>MODE1&nbsp; MODE0<br />
 
−
&nbsp; &nbsp; 0&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 0&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; LOOPBACK<br />
 
−
&nbsp; &nbsp; 0&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 1&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; RS232<br />
 
−
&nbsp; &nbsp; 1&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 0&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; RS485<br />
 
−
&nbsp; &nbsp; 1&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 1&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; RS422</p>
 
−
 
 
−
<p>Loopback test (eg. ttymxc0)<br />
 
−
Connect loopback test tool</p>
 
−
 
 
−
<ol>
 
−
<li>stty ‐F /dev/ttymxc0 115200<br />
 
−
# stty ‐F /dev/ttymxc0 ‐echo<br />
 
−
# cat /dev/ttymxc0 &amp;<br />
 
−
# echo test &gt; /dev/ttymxc0</li>
 
−
</ol>
 
−
 
 
−
<h3><b>&nbsp; 蓝牙使用方法(BlueTooth Operating&nbsp;Method)</b></h3>
 
−
 
 
−
<pre>
 
−
Command&amp;nbsp;:
 
−
 
 
−
$ hciconfig hci0 up
 
−
$ bluetoothctl
 
−
$ discoverable on
 
−
$ pairable on
 
−
$ scan on
 
−
[NEW] FC:18:3C:8D:75:F4 myphone
 
−
$ scan off
 
−
$ pair FC:18:3C:8D:75:F4
 
−
$ connect FC:18:3C:8D:75:F4</pre>
 
−
 
 
−
<p><img _fck_mw_filename="Z18.jpg" _fck_mw_origimgheight="185" _fck_mw_origimgwidth="568" alt="RTENOTITLE" src="/wiki/images/4/48/Z18.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p>
 
−
 
 
−
<h3>&nbsp;&nbsp;<a alt="http://ess-wiki.advantech.com.tw/view/ROM-5721_user_guide#.E9.81.A0.E7.A8.8B.E8.A8.AA.E5.95.8F.E5.8F.8A.E6.96.87.E4.BB.B6.E5.82.B3.E8.BC.B8.28Remote_Access_and_File_Transimmion.29" href="http://ess-wiki.advantech.com.tw/view/ROM-5721_user_guide#.E9.81.A0.E7.A8.8B.E8.A8.AA.E5.95.8F.E5.8F.8A.E6.96.87.E4.BB.B6.E5.82.B3.E8.BC.B8.28Remote_Access_and_File_Transimmion.29" title="http://ess-wiki.advantech.com.tw/view/ROM-5721_user_guide#.E9.81.A0.E7.A8.8B.E8.A8.AA.E5.95.8F.E5.8F.8A.E6.96.87.E4.BB.B6.E5.82.B3.E8.BC.B8.28Remote_Access_and_File_Transimmion.29"><b>遠程訪問及文件傳輸(Remote Access and File Transimmion)</b></a></h3>
 
−
 
 
−
<p><b>&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 查看主板IP位址&nbsp;(&nbsp;Chech IP Address )：</b>​</p>
 
−
 
 
−
<pre>
 
−
        Command&amp;nbsp;: ifconfig</pre>
 
−
 
 
−
<p><img _fck_mw_filename="Z19.jpg" _fck_mw_origimgheight="202" _fck_mw_origimgwidth="838" alt="RTENOTITLE" src="/wiki/images/d/de/Z19.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p>
 
−
 
 
−
<h4>Windows下SSH访问及文件传输</h4>
 
−
 
 
−
<p>SSH Remote Log into Device&nbsp;</p>
 
−
 
 
−
<ul>
 
−
<li>SSH远程登录,以putty选择putty.exe(或者使用Xshell、SecureCRT等类似软件)</li>
 
−
<li>需要设置远程设备的IP、通讯端口(默认22)、通讯方式，登录后验证用户名密码</li>
 
−
</ul>
 
−
 
 
−
<p>&nbsp;</p>
 
−
 
 
−
<p><img _fck_mw_filename="SSHsettingdetail.png" _fck_mw_origimgheight="600" _fck_mw_origimgwidth="748" alt="RTENOTITLE" src="/wiki/images/3/35/SSHsettingdetail.png" style="vertical-align:middle;" title="RTENOTITLE" /></p>
 
−
 
 
−
<p><img _fck_mw_filename="Z20.jpg" _fck_mw_origimgheight="442" _fck_mw_origimgwidth="452" alt="RTENOTITLE" src="/wiki/images/2/24/Z20.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p>
 
−
 
 
−
<p>&nbsp;</p>
 
−
 
 
−
<p><img _fck_mw_filename="Sshsetting12021-09-10 143743n.jpg" _fck_mw_origimgheight="363" _fck_mw_origimgwidth="576" alt="RTENOTITLE" src="/wiki/images/b/b0/Sshsetting12021-09-10_143743n.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p>
 
−
 
 
−
<p><img _fck_mw_filename="Z21.jpg" _fck_mw_origimgheight="111" _fck_mw_origimgwidth="431" alt="RTENOTITLE" src="/wiki/images/c/c1/Z21.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p>
 
−
 
 
−
<h2><b>通用方法(General Method)</b></h2>
 
−
 
 
−
<h3>&nbsp;&nbsp;<b>查看CPU温度(Check CPU Temperature)</b></h3>
 
−
 
 
−
<pre>
 
−
    root@imx8mmrom5721a1:/# cat /sys/devices/virtual/thermal/thermal_zone0/temp 44600
 
−
 
 
−
    # 或者直接以度爲單位顯示 echo $[$(cat /sys/class/thermal/thermal_zone0/temp)/1000]&deg; &gt;&gt;&gt; 45&deg;</pre>
 
−
 
 
−
<h3><b>&nbsp; 查看CPU频率(Check CPU Frequency)</b></h3>
 
−
 
 
−
<pre>
 
−
          cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq
 
−
          &gt;&gt; 900000
 
−
          cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq   
 
−
          &gt;&gt; 1200000</pre>
 
−
 
 
−
<h3><b>&nbsp; 查看内存容量(Check Memory&nbsp;Capacity)</b></h3>
 
−
 
 
−
<pre>
 
−
root@imx8mmrom5721a1:/# busybox free -m
 
−
            total      used      free    shared    buffers    cached
 
−
Mem:      1794920    516080    1278840      17252      9852        80292
 
−
-/+ buffers/cache:    425936    1368984
 
−
Swap:            0          0          0
 
−
</pre>
 
−
 
 
−
<h3><b>查看存储容量(Check Storage Capacity)</b></h3>
 
−
 
 
−
<pre>
 
−
root@imx8mmrom5721a1:/# busybox df -h
 
−
Filesystem                Size      Used Available Use% Mounted on
 
−
/dev/root                13.4G      1.7G    11.1G  13% /
 
−
devtmpfs                395.8M      4.0K    395.8M  0% /dev
 
−
tmpfs                  876.4M        0    876.4M  0% /dev/shm
 
−
tmpfs                  876.4M    16.5M    859.9M  2% /run
 
−
tmpfs                  876.4M        0    876.4M  0% /sys/fs/cgroup
 
−
tmpfs                  876.4M      4.0K    876.4M  0% /tmp
 
−
tmpfs                  876.4M    280.0K    876.2M  0% /var/volatile
 
−
/dev/mmcblk0p2          13.6G      1.7G    11.3G  13% /run/media/mmcblk0p2
 
−
/dev/mmcblk0p1          63.9M    23.4M    40.5M  37% /run/media/mmcblk0p1
 
−
/dev/mmcblk1p1          63.9M    23.4M    40.5M  37% /run/media/mmcblk1p1
 
−
tmpfs                  175.3M    88.0K    175.2M  0% /run/user/0
 
−
root@imx8qxprom5620a1:/#</pre>
 
−
 
 
−
<h3><b>&nbsp; 網路Ping測試(Ping Network Testing)</b></h3>
 
−
 
 
−
<pre>
 
−
    ping 8.8.8.8
 
−
    PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
 
−
    64 bytes from 8.8.8.8: icmp_seq=1 ttl=54 time=2.10 ms
 
−
    64 bytes from 8.8.8.8: icmp_seq=2 ttl=54 time=2.10 ms</pre>
 
−
 
 
−
<h3><b>&nbsp; 設置RTC (RTC Setting)&nbsp;</b></h3>
 
−
 
 
−
<pre>
 
−
    root@imx8mmrom5721a1:/# systemctl stop ntpdate.service
 
−
    root@imx8mmrom5721a1:/# date 090816072021 &amp;&amp; hwclock -w &amp;&amp; date
 
−
            Wed Sep  8 16:07:00 UTC 2021
 
−
            Wed Sep  8 16:07:00 UTC 2021
 
−
    root@imx8mmrom5721a1:/# date
 
−
            Wed Sep  8 16:07:06 UTC 2021
 
−
    root@imx8mmrom5721a1:/#&#39;&#39;&#39;</pre>
 
−
 
 
−
<p><b>&nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</b></p>
 
−
 
 
−
<h2><b>Linux&nbsp;BSP編譯方法(Linux&nbsp;BSP Compile Method)</b></h2>
 
−
 
 
−
<h3>&nbsp;&nbsp;<a alt="http://ess-wiki.advantech.com.tw/view/IoTGateway/BSP/Linux/iMX8/Yocto_LBV9_User_Guide" href="http://ess-wiki.advantech.com.tw/view/IoTGateway/BSP/Linux/iMX8/Yocto_LBV9_User_Guide" title="http://ess-wiki.advantech.com.tw/view/IoTGateway/BSP/Linux/iMX8/Yocto_LBV9_User_Guide"><b>Yocto 2.5</b></a></h3>
 
−
 
 
−
<h3><u>&nbsp;&nbsp;<a alt="http://ess-wiki.advantech.com.tw/view/IoTGateway/BSP/Linux/iMX8/Yocto_LBVA_User_Guide" href="http://ess-wiki.advantech.com.tw/view/IoTGateway/BSP/Linux/iMX8/Yocto_LBVA_User_Guide" title="http://ess-wiki.advantech.com.tw/view/IoTGateway/BSP/Linux/iMX8/Yocto_LBVA_User_Guide"><b>Yocto&nbsp;3.0</b></a></u></h3>
 
−
 
 
−
<ul>
 
−
<li><b>如果有驗證上的錯誤 請使用以下的方法</b></li>
 
−
</ul>
 
−
 
 
−
<p><u><b>### repo sync failed with Server certificate verification failed. CAfile: /etc/ssl/certs/ca-certificates.crt CRLfile: none</b></u> ERROR: gstreamer1.0-1.14.4.imx-r0 do_unpack: Fetcher failure: Fetch command export PSEUDO_DISABLED=1; export PATH=&quot;/hom e/adv/adv-release-bsp/build_x11/tmp/work/aarch64-poky-linux/gstreamer1.0/1.14.4.imx-r0/recipe-sysroot-native/usr/bin/py thon3-native:/home/adv/adv-release-bsp/sources/poky/scripts:/home/adv/adv-release-bsp/build_x11/tmp/work/aarch64-poky-l inux/gstreamer1.0/1.14.4.imx-r0/recipe-sysroot-native/usr/bin/aarch64-poky-linux:/home/adv/adv-release-bsp/build_x11/tm p/work/aarch64-poky-linux/gstreamer1.0/1.14.4.imx-r0/recipe-sysroot/usr/bin/crossscripts:/home/adv/adv-release-bsp/buil d_x11/tmp/work/aarch64-poky-linux/gstreamer1.0/1.14.4.imx-r0/recipe-sysroot-native/usr/sbin:/home/adv/adv-release-bsp/b uild_x11/tmp/work/aarch64-poky-linux/gstreamer1.0/1.14.4.imx-r0/recipe-sysroot-native/usr/bin:/home/adv/adv-release-bsp /build_x11/tmp/work/aarch64-poky-linux/gstreamer1.0/1.14.4.imx-r0/recipe-sysroot-native/sbin:/home/adv/adv-release-bsp/ build_x11/tmp/work/aarch64-poky-linux/gstreamer1.0/1.14.4.imx-r0/recipe-sysroot-native/bin:/home/adv/adv-release-bsp/so urces/poky/bitbake/bin:/home/adv/adv-release-bsp/build_x11/tmp/hosttools&quot;; export HOME=&quot;/home/adv&quot;; git -c core.fsyncob jectfiles=0 submodule update --init --recursive failed with exit code 1, output:</p>
 
−
 
 
−
<p>Submodule &#39;common&#39; (</p>
 
−
 
 
−
<p><a alt="https://anongit.freedesktop.org/git/gstreamer/common.git)" href="https://anongit.freedesktop.org/git/gstreamer/common.git)" title="https://anongit.freedesktop.org/git/gstreamer/common.git)">https://anongit.freedesktop.org/git/gstreamer/common.git)</a> registered for path &#39;common&#39;</p>
 
−
 
 
−
<p>Cloning into &#39;/home/adv/adv-release-bsp/build_x11/tmp/work/aarch64-poky-linux/gstreamer1.0/1.14.4.imx-r0/git/common&#39;...</p>
 
−
 
 
−
<p>fatal: unable to access &#39;</p>
 
−
 
 
−
<p><a alt="https://anongit.freedesktop.org/git/gstreamer/common.git/':" href="https://anongit.freedesktop.org/git/gstreamer/common.git/':" title="https://anongit.freedesktop.org/git/gstreamer/common.git/':">https://anongit.freedesktop.org/git/gstreamer/common.git/&#39;:</a> server certificate verification fa iled. CAfile: /etc/ssl/certs/ca-certificates.crt CRLfile: none</p>
 
−
 
 
−
<p>fatal: clone of &#39;</p>
 
−
 
 
−
<p><a alt="https://anongit.freedesktop.org/git/gstreamer/common.git'" href="https://anongit.freedesktop.org/git/gstreamer/common.git'" title="https://anongit.freedesktop.org/git/gstreamer/common.git'">https://anongit.freedesktop.org/git/gstreamer/common.git&#39;</a> into submodule path &#39;/home/adv/adv-release-b sp/build_x11/tmp/work/aarch64-poky-linux/gstreamer1.0/1.14.4.imx-r0/git/common&#39; failed</p>
 
−
 
 
−
<p>Failed to clone &#39;common&#39;. Retry scheduled</p>
 
−
 
 
−
<p>Cloning into &#39;/home/adv/adv-release-bsp/build_x11/tmp/work/aarch64-poky-linux/gstreamer1.0/1.14.4.imx-r0/git/common&#39;...</p>
 
−
 
 
−
<p>fatal: unable to access &#39;</p>
 
−
 
 
−
<p><a alt="https://anongit.freedesktop.org/git/gstreamer/common.git/':" href="https://anongit.freedesktop.org/git/gstreamer/common.git/':" title="https://anongit.freedesktop.org/git/gstreamer/common.git/':">https://anongit.freedesktop.org/git/gstreamer/common.git/&#39;:</a> server certificate verification fa iled. CAfile: /etc/ssl/certs/ca-certificates.crt CRLfile: none</p>
 
−
 
 
−
<p>fatal: clone of &#39;</p>
 
−
 
 
−
<p><a alt="https://anongit.freedesktop.org/git/gstreamer/common.git'" href="https://anongit.freedesktop.org/git/gstreamer/common.git'" title="https://anongit.freedesktop.org/git/gstreamer/common.git'">https://anongit.freedesktop.org/git/gstreamer/common.git&#39;</a> into submodule path &#39;/home/adv/adv-release-b sp/build_x11/tmp/work/aarch64-poky-linux/gstreamer1.0/1.14.4.imx-r0/git/common&#39; failed</p>
 
−
 
 
−
<p>Failed to clone &#39;common&#39; a second time, aborting</p>
 
−
 
 
−
<p>ERROR: gstreamer1.0-1.14.4.imx-r0 do_unpack: Function failed: base_do_unpack</p>
 
−
 
 
−
<p>ERROR: Logfile of failure stored in: /home/adv/adv-release-bsp/build_x11/tmp/work/aarch64-poky-linux/gstreamer1.0/1.14. 4.imx-r0/temp/log.do_unpack.42631</p>
 
−
 
 
−
<p>ERROR: Task (/home/adv/adv-release-bsp/sources/meta-fsl-bsp-release/imx/meta-bsp/recipes-multimedia/gstreamer/gstreamer 1.0_1.14.imx.bb:do_unpack) failed with exit code &#39;1&#39;</p>
 
−
 
 
−
<p>ERROR: gstreamer1.0-plugins-base-1.14.4.imx-r0 do_unpack: Fetcher failure: Fetch command export PSEUDO_DISABLED=1; expo rt PATH=&quot;/home/adv/adv-release-bsp/build_x11/tmp/work/aarch64-mx8mm-poky-linux/gstreamer1.0-plugins-base/1.14.4.imx-r0/ recipe-sysroot-native/usr/bin/python3-native:/home/adv/adv-release-bsp/sources/poky/scripts:/home/adv/adv-release-bsp/b uild_x11/tmp/work/aarch64-mx8mm-poky-linux/gstreamer1.0-plugins-base/1.14.4.imx-r0/recipe-sysroot-native/usr/bin/aarch6 4-poky-linux:/home/adv/adv-release-bsp/build_x11/tmp/work/aarch64-mx8mm-poky-linux/gstreamer1.0-plugins-base/1.14.4.imx -r0/recipe-sysroot/usr/bin/crossscripts:/home/adv/adv-release-bsp/build_x11/tmp/work/aarch64-mx8mm-poky-linux/gstreamer 1.0-plugins-base/1.14.4.imx-r0/recipe-sysroot-native/usr/sbin:/home/adv/adv-release-bsp/build_x11/tmp/work/aarch64-mx8m m-poky-linux/gstreamer1.0-plugins-base/1.14.4.imx-r0/recipe-sysroot-native/usr/bin:/home/adv/adv-release-bsp/build_x11/ tmp/work/aarch64-mx8mm-poky-linux/gstreamer1.0-plugins-base/1.14.4.imx-r0/recipe-sysroot-native/sbin:/home/adv/adv-rele ase-bsp/build_x11/tmp/work/aarch64-mx8mm-poky-linux/gstreamer1.0-plugins-base/1.14.4.imx-r0/recipe-sysroot-native/bin:/ home/adv/adv-release-bsp/sources/poky/bitbake/bin:/home/adv/adv-release-bsp/build_x11/tmp/hosttools&quot;; export HOME=&quot;/hom e/adv&quot;; git -c core.fsyncobjectfiles=0 submodule update --init --recursive failed with exit code 1, output:</p>
 
−
 
 
−
<p>Submodule &#39;common&#39; (</p>
 
−
 
 
−
<p><a alt="https://anongit.freedesktop.org/git/gstreamer/common.git)" href="https://anongit.freedesktop.org/git/gstreamer/common.git)" title="https://anongit.freedesktop.org/git/gstreamer/common.git)">https://anongit.freedesktop.org/git/gstreamer/common.git)</a> registered for path &#39;common&#39;</p>
 
−
 
 
−
<p>Cloning into &#39;/home/adv/adv-release-bsp/build_x11/tmp/work/aarch64-mx8mm-poky-linux/gstreamer1.0-plugins-base/1.14.4.im x-r0/git/common&#39;...</p>
 
−
 
 
−
<p>fatal: unable to access &#39;</p>
 
−
 
 
−
<p><a alt="https://anongit.freedesktop.org/git/gstreamer/common.git/':" href="https://anongit.freedesktop.org/git/gstreamer/common.git/':" title="https://anongit.freedesktop.org/git/gstreamer/common.git/':">https://anongit.freedesktop.org/git/gstreamer/common.git/&#39;:</a> server certificate verification fa iled. CAfile: /etc/ssl/certs/ca-certificates.crt CRLfile: none</p>
 
−
 
 
−
<p>fatal: clone of &#39;</p>
 
−
 
 
−
<p><a alt="https://anongit.freedesktop.org/git/gstreamer/common.git'" href="https://anongit.freedesktop.org/git/gstreamer/common.git'" title="https://anongit.freedesktop.org/git/gstreamer/common.git'">https://anongit.freedesktop.org/git/gstreamer/common.git&#39;</a> into submodule path &#39;/home/adv/adv-release-b sp/build_x11/tmp/work/aarch64-mx8mm-poky-linux/gstreamer1.0-plugins-base/1.14.4.imx-r0/git/common&#39; failed</p>
 
−
 
 
−
<p>Failed to clone &#39;common&#39;. Retry scheduled</p>
 
−
 
 
−
<p>Cloning into &#39;/home/adv/adv-release-bsp/build_x11/tmp/work/aarch64-mx8mm-poky-linux/gstreamer1.0-plugins-base/1.14.4.im x-r0/git/common&#39;...</p>
 
−
 
 
−
<p>fatal: unable to access &#39;</p>
 
−
 
 
−
<p><a alt="https://anongit.freedesktop.org/git/gstreamer/common.git/':" href="https://anongit.freedesktop.org/git/gstreamer/common.git/':" title="https://anongit.freedesktop.org/git/gstreamer/common.git/':">https://anongit.freedesktop.org/git/gstreamer/common.git/&#39;:</a> server certificate verification fa iled. CAfile: /etc/ssl/certs/ca-certificates.crt CRLfile: none</p>
 
−
 
 
−
<p>fatal: clone of &#39;</p>
 
−
 
 
−
<p><a alt="https://anongit.freedesktop.org/git/gstreamer/common.git'" href="https://anongit.freedesktop.org/git/gstreamer/common.git'" title="https://anongit.freedesktop.org/git/gstreamer/common.git'">https://anongit.freedesktop.org/git/gstreamer/common.git&#39;</a> into submodule path &#39;/home/adv/adv-release-b sp/build_x11/tmp/work/aarch64-mx8mm-poky-linux/gstreamer1.0-plugins-base/1.14.4.imx-r0/git/common&#39; failed</p>
 
−
 
 
−
<p>Failed to clone &#39;common&#39; a second time, aborting</p>
 
  
−
<p>ERROR: gstreamer1.0-plugins-base-1.14.4.imx-r0 do_unpack: Function failed: base_do_unpack</p>
+
Tera Term Tool&nbsp;
  
−
<p>ERROR: Logfile of failure stored in: /home/adv/adv-release-bsp/build_x11/tmp/work/aarch64-mx8mm-poky-linux/gstreamer1.0 -plugins-base/1.14.4.imx-r0/temp/log.do_unpack.51633</p>
+
<img _fck_mw_filename="TeraTerm 2021-09-10 140930n.jpg" _fck_mw_origimgheight="428" _fck_mw_origimgwidth="700" alt="RTENOTITLE" src="/wiki/images/2/25/TeraTerm_2021-09-10_140930n.jpg" style="vertical-align:middle;" title="RTENOTITLE" />
  
−
<p>ERROR: Task (/home/adv/adv-release-bsp/sources/meta-fsl-bsp-release/imx/meta-bsp/recipes-multimedia/gstreamer/gstreamer 1.0-plugins-base_1.14.imx.bb:do_unpack) failed with exit code &#39;1&#39;</p>
+
<img _fck_mw_filename="TeraTerm12021-09-10 141114n.jpg" _fck_mw_origimgheight="391" _fck_mw_origimgwidth="609" alt="RTENOTITLE" src="/wiki/images/6/6d/TeraTerm12021-09-10_141114n.jpg" style="vertical-align:middle;" title="RTENOTITLE" />
  
−
<p><u><b>============================================================<br />
+
Check the Sriel port in Device Manager (查看PC端的串口号)：
−
export GIT_SSL_NO_VERIFY=1<br />
 
−
#or<br />
 
−
git config --global http.sslverify false<br />
 
−
============================================================</b></u></p>
 
  
−
<p>&nbsp;</p>
+
if you can not identify the Serial device , please check your serial driver.&nbsp;
  
−
<ul>
+
<img _fck_mw_filename="COMportinx862021-09-10 141610.jpg" _fck_mw_origimgheight="640" _fck_mw_origimgwidth="588" alt="RTENOTITLE" src="/wiki/images/9/99/COMportinx862021-09-10_141610.jpg" style="vertical-align:middle;" title="RTENOTITLE" />
−
<li>Build error with git protocal:</li>
 
−
</ul>
 
  
−
<p>ERROR: ExpansionError during parsing /home/adv/adv-release-bsp/sources/meta-advantech/meta-tools/recipes-utils/mdio-tool/mdio-tool_1.0.bb</p>
+
Debug port connection (串口連接)&nbsp;
  
−
<p>fatal: remote error:<br />
+
<img _fck_mw_filename="Debugcom3nn 2021-09-10 140320.jpg" _fck_mw_origimgheight="500" _fck_mw_origimgwidth="203" alt="RTENOTITLE" src="/wiki/images/e/e3/Debugcom3nn_2021-09-10_140320.jpg" style="vertical-align:middle;" title="RTENOTITLE" />
−
&nbsp; The unauthenticated git protocol on port 9418 is no longer supported.<br />
 
−
Please see <u><a alt="https://github.blog/2021-09-01-improving-git-protocol-security-github/" href="https://github.blog/2021-09-01-improving-git-protocol-security-github/" title="https://github.blog/2021-09-01-improving-git-protocol-security-github/">https://github.blog/2021-09-01-improving-git-protocol-security-github/</a></u> for more information.</p>
 
  
−
<p>Modify: &quot;/home/adv/adv-release-bsp/sources/meta-advantech/meta-tools/recipes-utils/mdio-tool/mdio-tool_1.0.bb&quot; file to</p>
+
&nbsp;
  
−
<p>SRC_URI = &quot;<a alt="git://github.com/PieVo/mdio-tool.git;protocol=" href="git://github.com/PieVo/mdio-tool.git;protocol=" title="git://github.com/PieVo/mdio-tool.git;protocol=">git://github.com/PieVo/mdio-tool.git;protocol=</a><span style="background-color:#FFFF00;">https</span>;branch=master&quot;</p>
+
Log into Terminal&nbsp; Tool (进入串口调试终端)：
  
−
<p><img _fck_mw_filename="Z74.jpg" _fck_mw_origimgheight="456" _fck_mw_origimgwidth="884" alt="RTENOTITLE" src="/wiki/images/d/d5/Z74.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p>
+
<img _fck_mw_filename="Z15.jpg" _fck_mw_origimgheight="320" _fck_mw_origimgwidth="1057" alt="RTENOTITLE" src="/wiki/images/9/9c/Z15.jpg" style="vertical-align:middle;" title="RTENOTITLE" />
  
−
<p>&nbsp;</p>
+
----
  
−
<table border="0" cellpadding="10" cellspacing="0" style="width:100%;">
+
== '''Linux系统的基本使用(Linux&nbsp;System Basic Operating Method)''' ==
−
<tbody>
 
−
<tr>
 
−
<td><span _fck_mw_customtag="true" _fck_mw_tagattributes="height,key,level,path,width" _fck_mw_tagname="iframe" _fck_mw_tagtype="t" class="fck_mw_special" height="230" key="advonline" level="campaign" path="en/aim-linux_community/" width="100%">_</span></td>
 
−
</tr>
 
−
</tbody>
 
−
</table>
 

Revision as of 08:17, 20 May 2022

資源特性(Features)

訂購資訊(Ordering Information)

 

接口布局和尺寸(Layout and Sizes)

  EPC-R7200 接口布局圖 Board Dimension Layout 

 

 

  主板内置插针式引脚排序方式 (Pin Header defination) 

  Internal I/O

 

<tbody>
Position Description Connector Type
BAT1 PIN Header for Battery WAFER 8P 2.54mm 180D(M) DIP
A2543WV2-8P
BH1 RTC Battery Holder BATTERY HOLDER 24.9*23.4*8.9
CR2032 BH800.4GG
CAN1 CANBus Port 1 BOX HEADER 5x2P 2.54mm 180D(M)
DIP 23N6960-10S10
CAN2 CANBus Port 2 BOX HEADER 5x2P 2.54mm 180D(M)
DIP 23N6960-10S10
COM1 COM Port 1 BOX HEADER 5x2P 2.54mm 180D(M)
DIP 23N6960-10S10
COM3 COM Port 3 (Debug Port) BOX HEADER 5x2P 2.54mm 180D(M)
DIP 23N6960-10S10
CN4 PCIex1 Connector 1 PCIEXPRESS 36P 180D(F) DIP
2EG01817-D2D-DF
CN5 PCIex1 Connector 2 PCIEXPRESS 36P 180D(F) DIP
2EG01817-D2D-DF
CN6 PCIex1 Connector 3 PCIEXPRESS 36P 180D(F) DIP
2EG01817-D2D-DF
CN11 SATA Connector Serial ATA 7P 1.27mm 180D(M) DIP
WATM-07DBN4A3B8
CN12 SATA Power Connector WAFER 4P 2.5mm 180D(M) DIP
24W1161-04S10-01T
CN22 GPIOx8 sets PIN HEADER 10x2P 2.0mm 180D(M)
DIP 21N22050
CN25 MXM 3.0 Connector MXM Conn. 314P 90D(F) SMD
AS0B821-S78B-7H
CN26 M.2 Key E Slots NGFF 75P 0.5mm 90D(F) H=4.2mm
SMD AS0BC21-S40BE
CN38 FAN (Reserved) WTB Con. 3P 2.54mm 180D(M) DIP
A2543WV0-3P-6T-5e
CN39 MIPI-CSI1 (FPC, 4-Lane FPC 39P, 0.6mm, H0.9mm
CN40 MIPI-CSI0 (FPC, 2-Lane) FPC 39P, 0.6mm, H0.9mm
CN41 MIPI-CSI0 (Mini-SAS, 2-Lane) Mini SAS 36P/0.8mm/(M)/LCP/VA/G15u/
S/BK/W
CN42 MIPI-CSI1 (Mini-SAS, 4-Lane) Mini SAS 36P/0.8mm/(M)/LCP/VA/G15u/
S/BK/W
ESPI_CN1 ESPI PIN HEADER 6x2P 2.0mm180D(M) SMD
21N22050-12M00B
I2C_GP_1 I2C Pin Header WAFER BOX 4P 2.00mm 180D(M) DIP
721-81-04TW00
I2C_CN3 Audio Codec Board PIN HEADER 2x10P 2.54mm 180D(M)
DIP 21N22564
LVDS0 LVDS0 Wafer 2x20P/1.25mm/(M)/NY9T/VA/GFL/
S/WH/W
LVDS_BK_PWR LVDS0 Back Light WAFER BOX 5P 2.0mm 180D(M) DIP
A2001WV2-5P
LVDS1 LVDS1 Wafer 2x20P/1.25mm/(M)/NY9T/VA/GFL/
S/WH/W
LVDS1_BK_PWR LVDS1 Back Light WAFER BOX 5P 2.0mm 180D(M) DIP
A2001WV2-5P
SD1 SD Card Slot SD CARD 9P 90D(F) SMD WK2192CS3D-
7H
SPI_CN1 SPI Pin Header PIN HEADER 4x2P 2.54mm 180D(M)
SMD 21N22564
SW2 Reset Button TACT SW STS-091 SMD 4P H=3.8mm
SW4 SLP Button TACT SW STS-091 SMD 4P H=3.8mm
SW5 Power Button TACT SW STS-091 SMD 4P H=3.8mm
USB0_OTG1 USB OTG Micro USB 5P/0.65mm/(F)/NY9T/GFL/
RA/S/BK/B
USB-4-5 USB Port 4, Port 5 PIN HEADER 2x5P 2.0mm 180D(M)
SMD 21N22050
</tbody>

  Rear I/O 

<img _fck_mw_filename="ROM-DB5901 RearIO.jpg" _fck_mw_origimgheight="226" _fck_mw_origimgwidth="778" alt="RTENOTITLE" src="/wiki/images/f/ff/ROM-DB5901_RearIO.jpg" style="vertical-align:middle;" title="RTENOTITLE" />

<tbody>
Position Description Name
DCIN DC Jack A
CN15A UART Port 0 B
CN15B UART Port 2 C
CN1A DP Port D
CN1B HDMI Port E
CN33 Type C Controller Programming Header (Reserved Only) F
CN34 USB Type C G
CN8 GbE Ethernet Connector Port H
CN3 USB Port 1/ 2 I
Audio1 MIC Input/ Audio Output J
</tbody>

  接口引脚定義 (Pin definitions)

  机械尺寸  (Mechanical Characteristics)

EPC-R7200 

 

 

 

 

快速入门 (Quick Start)

  系统下载 (OS Download)

  • Linux系统 (Linux OS)

 

  Linux 燒錄方法 (Linux Flash eMMC Method)

使用Flash tool 燒錄鏡像到eMMC (Flash image into eMMC by Flash Tools) 

 

  Debug 串口調試 (Debug port Setting)

以 Tera Term  为例介绍如何使用串口调试功能 

   Baud Rate波特率：115200
   Data 数据位：8
   Parity 奇偶校验：无
&nbsp;  Stop 停止位：1
   Flow Control流控：无
 

Tera Term Tool 

<img _fck_mw_filename="TeraTerm 2021-09-10 140930n.jpg" _fck_mw_origimgheight="428" _fck_mw_origimgwidth="700" alt="RTENOTITLE" src="/wiki/images/2/25/TeraTerm_2021-09-10_140930n.jpg" style="vertical-align:middle;" title="RTENOTITLE" />

<img _fck_mw_filename="TeraTerm12021-09-10 141114n.jpg" _fck_mw_origimgheight="391" _fck_mw_origimgwidth="609" alt="RTENOTITLE" src="/wiki/images/6/6d/TeraTerm12021-09-10_141114n.jpg" style="vertical-align:middle;" title="RTENOTITLE" />

Check the Sriel port in Device Manager (查看PC端的串口号)：

if you can not identify the Serial device , please check your serial driver. 

<img _fck_mw_filename="COMportinx862021-09-10 141610.jpg" _fck_mw_origimgheight="640" _fck_mw_origimgwidth="588" alt="RTENOTITLE" src="/wiki/images/9/99/COMportinx862021-09-10_141610.jpg" style="vertical-align:middle;" title="RTENOTITLE" />

Debug port connection (串口連接) 

<img _fck_mw_filename="Debugcom3nn 2021-09-10 140320.jpg" _fck_mw_origimgheight="500" _fck_mw_origimgwidth="203" alt="RTENOTITLE" src="/wiki/images/e/e3/Debugcom3nn_2021-09-10_140320.jpg" style="vertical-align:middle;" title="RTENOTITLE" />

 

Log into Terminal  Tool (进入串口调试终端)：

<img _fck_mw_filename="Z15.jpg" _fck_mw_origimgheight="320" _fck_mw_origimgwidth="1057" alt="RTENOTITLE" src="/wiki/images/9/9c/Z15.jpg" style="vertical-align:middle;" title="RTENOTITLE" />

Linux系统的基本使用(Linux System Basic Operating Method)

Retrieved from "https://ess-wiki.advantech.com.tw/wiki/index.php?title=EPC-R7200_user_guide&oldid=24061"