Difference between revisions of "RK Platform Fast Test"
Yunjin.jiang (talk | contribs) |
Yunjin.jiang (talk | contribs) |
||
| Line 101: | Line 101: | ||
== CAN == | == CAN == | ||
| + | Test script need two CANs, set one CAN as sender and the other as receiver. | ||
| + | |||
| + | Then send "123#55" from the sender, check whether the receiver get the same data. | ||
| + | |||
| + | === Preparation === | ||
| + | |||
| + | #Short CAN0's CAN_L (PIN2 DB9) to CAN1's CAN_L (PIN2 DB9) | ||
| + | #Short CAN0's CAN_H (PIN7 DB9) to CAN1's CAN_H (PIN7 DB9) | ||
| + | === Testing === | ||
| + | |||
| + | Run the following command on DUT Terminal、ADB or Debug console: | ||
| + | |||
| + | can0 is receiver, can1 is sender | ||
| + | <pre> | ||
| + | |||
| + | /tools/test/adv/can/can_test.sh can0 can1 | ||
| + | |||
| + | </pre> | ||
| + | can1 is receiver, can0 is sender | ||
| + | <pre> | ||
| + | |||
| + | /tools/test/adv/can/can_test.sh can1 can0 | ||
| + | |||
| + | </pre> | ||
| + | |||
| + | === Result === | ||
| + | |||
| + | 1. Failure | ||
| + | |||
| + | <span style="color:#c0392b;">[ Failed ]: canbus Test Fail</span> | ||
| + | |||
| + | 2. Success | ||
| + | |||
| + | <span style="color:#00ff00;">[ OK ]</span>: canbus Test Pass | ||
== I2C PIN Header == | == I2C PIN Header == | ||
Revision as of 08:36, 26 May 2023
Preface
When sending samples to customer or test team (Lab、DQA etc) or releasing images, we need test all functions.
All functions are classified to three types:
- Full-automatic Test
- Semi-automatic Test
- Manual Test
Full-Automatic Test
Run test script and get the result automatically.
Support to test the following items:
- AIM Linux Applications
- AIM Linux Services
- AIM Timers
- Thermal
- NPU
- GPU
- VPU
- eMMC
- RTC
Preparation
- Insert network cable to DUT
- Open browser on DUT, then input "172.21.128.237"
- Login your account to connect to internet
Testing
Run the following command on DUT Terminal、ADB or Debug console:
/tools/test/adv/auto_test/auto_test.sh
Result
1. Failure
[ Failed ]: docker run hello-world; Please check net connection, or docker
2. Success
[ OK ]: docker run hello-world
Semi-Automatic Test
GPIO
Test script need two GPIOs, set one GPIO to output and the other to input.
Then set the output to 1, read whether the input is 1.
Then set the output to 0, read whether the input is 0.
Preparation
- To get GPIO number from WIKI or User Mamual
- Short two GPIOs your want to test
[ Note ]
DB5901、DB2510 GPIOs have multi-functions, change to GPIO mode.
Testing
For example:
To test ROM-5880's GPIO0 and GPIO1
Run the following command on DUT Terminal、ADB or Debug console:
/tools/test/adv/gpio/gpio_test.sh 88 89
Result
1. Failure
[ Failed ]: gpio-test 88 89 Test Fail
2. Success
[ OK ]: gpio-test 88 89 Test Pass
UART
CAN
Test script need two CANs, set one CAN as sender and the other as receiver.
Then send "123#55" from the sender, check whether the receiver get the same data.
Preparation
- Short CAN0's CAN_L (PIN2 DB9) to CAN1's CAN_L (PIN2 DB9)
- Short CAN0's CAN_H (PIN7 DB9) to CAN1's CAN_H (PIN7 DB9)
Testing
Run the following command on DUT Terminal、ADB or Debug console:
can0 is receiver, can1 is sender
/tools/test/adv/can/can_test.sh can0 can1
can1 is receiver, can0 is sender
/tools/test/adv/can/can_test.sh can1 can0
Result
1. Failure
[ Failed ]: canbus Test Fail
2. Success
[ OK ]: canbus Test Pass
I2C PIN Header
SPI PIN Header
Manual Test
SD Card
SATA
PCIE
USB
watchdog
lan
wlan
bluetooth
4G/5G
Audio
Camera
Display
SW reboot
Reboot Button
Power Button