Difference between revisions of "1. Using AndroidTool."

Revision as of 08:55, 26 May 2023

Step1 请先准备一条mirco USB 线材和Debug Cable

Mirco USB

Debug Cable

Step2 Double click DriverInstal

Step3 Enter into MASKROM mode .

There are two ways to enter MASKROM

1. Hardware way to enter MASKROM

Step1将Mirco USB的OTG端插在板卡的USB0_OTG1端口上，USB端插在PC上，如下图

Step 2 将底板ROM-DB5901的SW1（BOOT SEELECT）拨码如下

Step 3 使用12V 3A的电源上电，并打开瑞芯微开发工具V2.65，如下图

插一张进入MASROM设备模式的图片

Step 4当板卡进入MASKROM模式后，将底板ROM-DB5901 SW1的4、5拨回OFF（1-6均为OFF），再点击“执行”开始进行烧录。

插一张ADB的图片

2. Software way to enter MASKROM

When the device boot up to android or debian, you can use ADB or Debug console, send command "reboot loader" .

Or Press "ctrl + c" key when booting into uboot, until get the following information on debug console :

Android 10：

Hit any key to stop autoboot:0

rkboot # <INTERUPT>

rkoot # =>rbrom

I2C2 speed: 100000Hz

Debian 9.x'：

Hit any key to stop autoboot:0

rkboot # <INTERUPT>

rkoot # =>rbrom

插一张loader图片

点击“高级功能”，进行选择，点击“进入Maskrom”，如下图所示：

插两张设置图片

@@ Line 8: / Line 8: @@
 '''Debug Cable'''
-[[File:ROM-5780 debug cable.png|RTENOTITLE]]
+&nbsp;
 '''Step2 Double click DriverInstal'''
-[[File:ROM-5780 driverInstall.png]]
+&nbsp;
 '''<span style="background:white"><span lang="EN-US" style="font-size:10.5pt"><span style="font-family:"><span style="color:#252525">Step3 Enter into MASKROM mode .</span></span></span></span>'''
@@ Line 22: / Line 22: @@
 <span lang="EN-US" style="font-size:10.5pt"><span style="font-family:"><span style="color:#252525">Step1</span></span></span><span style="font-size:10.5pt"><span style="font-family:等线"><span style="color:#252525">将</span></span></span>'''<span lang="EN-US" style="font-size:9.0pt"><span style="font-family:等线">Mirco USB</span></span><span style="font-size:9.0pt"><span style="font-family:等线">的OTG端插在板卡的USB0_OTG1端口上，USB端插在PC上，如下图</span></span>'''
-[[File:ROM-5780 Mirco USB.png]]
+&nbsp;
 Step 2 将底板ROM-DB5901的SW1（BOOT SEELECT）拨码如下