Difference between revisions of "User Guide 4710 Android 10"

Revision as of 04:26, 25 December 2023

產品介紹(Product introduction )

產品特性(Product Features)

• Rockchip RK3399 ARM Dual Cortex-A72 and Quad Cortex-A53 1.8 GHz 
  *Onboard 2GB LPDDR4 memory and 16GB eMMC 
  *Dual HDMI(4K 60fps + 1080P), 1 x eDP, 1 x dual channel LVDS, 1 x MIPI CSI 
  *Supports 4K H.264/H.265 video decoder 
  *6 x serial, 1 x USB3.0, 4 x USB2.0 ,1 x USB OTG, 2 x GbE, 1 x SPI, 1 x I2C, 5 x GPIOs 
  *M.2 for WIFI/BT support, mini-PCIe for 3G/4G support 
  *Supports Debian9/10 and Android7.1/10.0 

產品官網連結(Product official website link) 

RSB-4710

硬件接口說明(Hardware interface introduction)

接口布局和尺寸(Layout and Sizes)

RSB-4710 接口布局圖 Board Dimension Layout 

 Connector List

接口引脚定義 (Pin definitions)

• 电池扣（RTC） 
• 串口（RS-232 (COM1)，RS-232/Debug Port (COM2/DEBUG)，RS-232/485 (COM56)，Internal RS-232 (COM34)） 
• 显示接口（LVDS,LVDS_BL,EDP,HDMI） 
• LAN接口（LAN1，LAN2） 
• USB接口（USB1，Pin Header，OTG） 
• 音频接口（Audio） 
• Micro SD & Nano SIM Card 
• 电源及指示灯和开关机复位按钮（DC Power，Power Button and LED） 
• Mini PCIe & MIPI CSI 接口 
• M.2接口 
• GPIO接口 
• SPI ，I2C接口 
• RSB-4710 Jumper List 

机械尺寸  (Mechanical Characteristics)

快速入门 (Quick Start)

系统下载 (OS Download)

• Android 系统 (Andorid OS)

Android 10：http://ess-wiki.advantech.com.tw/view/AIM-Linux/BSP/RK/Linux_Android_OS_Release_note/Android10/Internal 

Android 燒錄方法 (Android Flash eMMC Method) 

There are three ways to update images：

1._Using_AndroidToool.

There is no limitation by this way.

2._Using_storage（such sd_or_USB_disk）with_update.zip_in_it.

There are some limitations：

（1）The device must be able to boot up to Android system.

（2）Only update images from the same os,  eg : 

        Android6.0 upgrade to Android6.0 or Android7.1 upgrade to Android7.1.

（3）Using update.zip to upgrade. (see more detail in "Create OTA zip" on how to create update.zip)

3._Using_bootup_sd_disk made_by SDDiskTool.

（1）Only update images from the same os,  eg : 

         Android6.0 upgrade to Android6.0 or Android7.1 upgrade to Android7.1.

（2）Using update.img to upgrade.

Linux系统的基本使用(Linux System Basic Operating Method)

User Guide

RISC series(RSB-3710/RSB-4710/ROM-5780)

• Linux BSP User Guide for rk3399 series Debian9/Debian10 
  *Getting Start 
  *MAC_Address 

DS-100 

• Linux BSP User Guide for rk3399 series Debian9 
  *Linux BSP User Guide for rk3399 series DeviceOn 
  *Linux BSP User Guide for SGI [DMS-SA53] 

通用方法(General Method)

乙太網路使用方法(Ethernent Testing Method)

Command : ifconfig 

root@linaro-alip:~# ifconfig
docker0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        inet 172.17.0.1  netmask 255.255.0.0  broadcast 172.17.255.255
        ether 02:42:83:27:77:c0  txqueuelen 0  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.127.101  netmask 255.255.255.0  broadcast 192.168.127.255
        inet6 fe80::e405:b000:5963:d697  prefixlen 64  scopeid 0x20<link>
        ether c6:ff:6c:34:9d:7d  txqueuelen 1000  (Ethernet)
        RX packets 23  bytes 7566 (7.3 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 45  bytes 5391 (5.2 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
        device interrupt 24

eth1: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        ether 96:a4:98:8d:52:09  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1  (Local Loopback)
        RX packets 484  bytes 32428 (31.6 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 484  bytes 32428 (31.6 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

Command : ping 192.168.127.101

root@linaro-alip:~# ping 192.168.127.101
PING 192.168.127.101 (192.168.127.101) 56(84) bytes of data.
64 bytes from 192.168.127.101: icmp_seq=1 ttl=64 time=0.221 ms
64 bytes from 192.168.127.101: icmp_seq=2 ttl=64 time=0.135 ms
64 bytes from 192.168.127.101: icmp_seq=3 ttl=64 time=0.134 ms
64 bytes from 192.168.127.101: icmp_seq=4 ttl=64 time=0.137 ms
64 bytes from 192.168.127.101: icmp_seq=5 ttl=64 time=0.137 ms
^C
--- 192.168.127.101 ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 5ms
rtt min/avg/max/mdev = 0.134/0.152/0.221/0.037 ms
root@linaro-alip:~#

      查看CPU温度(Check CPU Temperature)

root@linaro-alip:~# cat /sys/devices/virtual/thermal/thermal_zone0/temp   34444
# 或者直接以度爲單位顯示 echo $[$(cat /sys/class/thermal/thermal_zone0/temp)/1000]° >>> 37°

      查看CPU频率(Check CPU Frequency)

root@linaro-alip:~# cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq
408000
root@linaro-alip:~# cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq
1416000

     查看内存容量(Check Memory Capacity)

root@linaro-alip:~# busybox free -m
              total        used        free      shared  buff/cache   available
Mem:           1961         269        1454          18         237        1696
Swap:             0           0           0

      查看存储容量(Check Storage Capacity)

root@linaro-alip:~# df -h
Filesystem       Size  Used Avail Use% Mounted on
/dev/root        7.9G  2.6G  4.9G  35% /
devtmpfs         973M  8.0K  973M   1% /dev
tmpfs            981M     0  981M   0% /dev/shm
tmpfs            981M  8.9M  972M   1% /run
tmpfs            5.0M  4.0K  5.0M   1% /run/lock
tmpfs            981M     0  981M   0% /sys/fs/cgroup
/dev/mmcblk1p10  6.4G  3.8M  6.4G   1% /userdata
/dev/mmcblk1p7    63M   13M   48M  21% /oem
tmpfs            197M  8.0K  197M   1% /run/user/1000
tmpfs            197M     0  197M   0% /run/user/0
root@linaro-alip:~#

設置RTC (RTC Setting) 

root@linaro-alip:~# date
Wed May 11 01:12:06 UTC 2022
root@linaro-alip:~# date -s "2022-5-11 09:12:00"
Wed May 11 09:12:00 UTC 2022
root@linaro-alip:~# date
Wed May 11 09:12:06 UTC 2022
root@linaro-alip:~# hwclock -w
root@linaro-alip:~# hwclock
2022-05-11 09:12:17.266424+00:00

WiFi使用方法(WIFI Testing Method)

1.Click Settings

2.Turn on Wi-Fi

3.Choose ESSID (for example, Advantech for guest)

4.Input the password

5.Wi-Fi connected

4G使用方法(4G Testing Method)

蓝牙使用方法(BlueTooth Operating Method)

音訊使用方法(BlueTooth Operating Method)

I2C 測試( I2C Test method) 

看門狗測試 (Watch Dog Test method) 

攝像頭測試(Camera Test method) 

遠程訪問及文件傳輸(Remote Access and File Transimmion)​

How to build Android 10 BSP (Android 10 BSP 編譯)

http://ess-wiki.advantech.com.tw/view/Android_BSP_User_Guide_for_rk3399_series_10.0