Difference between revisions of "RSB-3730 Yocto4.2 user guide"
Xingxing.li (talk | contribs) (→Linux基本使用方法（Linux Basic usage method）) |
Xingxing.li (talk | contribs) (→Linux基本使用方法（Linux Basic usage method）) |
||
| Line 208: | Line 208: | ||
# sync | # sync | ||
</pre> | </pre> | ||
| + | |||
| Line 239: | Line 240: | ||
[[RSB-3730_Yocto4.2_BT|'''BT''']] | [[RSB-3730_Yocto4.2_BT|'''BT''']] | ||
| − | |||
| − | |||
[[RSB-3730_Yocto4.2_UIO_Test|'''UIO Test''']] | [[RSB-3730_Yocto4.2_UIO_Test|'''UIO Test''']] | ||
Revision as of 01:36, 4 July 2024
Contents
產品介绍（Product Presentation）
產品特性(Product Features)
- NXP i.MX 8M PLUS 4xA53@1.8GHz
- Integrate 2.3 TOPS NPU and extend 8-26 TOPS AI card
- 4kP30,1080p60 HEVC, H.264, VP9, VP8 decoding
- 1080p60 H.265, H.264 encoding
- 1xHDMI2.0
- 5xGbE LAN, 1xGbE Fiber
- USB3.0,USB2.0,RS232,RS485,CAN FD,SATA,SD
- 8 Channels Mic Array
- Support AI card/5G/4G/GPS/ Wi-Fi 5/Wi-Fi6/BT
- Support TPM,TCM
- Linux and, Andriod
- Embeded DeviceOn, DeviceOn.CommBridge
產品官網鏈結（Product official website link）
硬件接口說明（Hardware interface description）
接口布局圖 Board Layout
接口尺寸 Board Dimension
Jumper List
| Jumper list | describe |
| VDD | VDD 3.3V &5V LVDS VDD & Backlight power level select |
| BLP1 | LVDS Backlight power 12V select |
| SW1 | AT &ATX Mode select and boot mode select |
| BTN | Power Button |
Connector List
| COM1/DEBUG2 | Debug CONN |
| BAT | RTC CONN |
| M.2 | M.2 CONN |
| LINE OUT | LINE OUT CONN |
| MIC IN | MIC IN CONN |
| UIO1 | UIO1 |
| UIO2 | UIO2 |
| LVDS | LVDS CONN |
| SD | SD slot |
| SIM | SIM slot |
| OTG | OTG |
| DCIN | DC-IN JACK |
| USB1 | USB CONN |
| HDMI | HDMI CONN |
| COM | COM CONN |
| RST | RST CONN |
| LED | LED |
| Mini PCIE | Mini PCIE CONN |
| LAN1 | RJ45 LAN |
快速入門（Quick Start）
系統下載（OS Dowload）
Note： LIV= Yocto Linux, UIV=Ubuntu, DIV = Debian, AIV=Android
LBV=BSP, LIV= Image
LIV9=Yocto-2.5, LIVA=Yocto-3.0, LIVB=Yocto-3.3, LIVC=Yocto-4.0 , LIVD=Yocto-4.2……
Downloads : downloads_imx8_6.1.22_2.0.0.tar.gz (imx6 and imx8 support)
- [downloads_imx8_6.1.22_2.0.0.tar.gz]
- [downloads_imx93_6.1.36.tar.gz]
- [ Dropbox link for imx8 Yocto 4.2_6.1.22 Image ]
- [ Dropbox link for imx93 Yocto 4.2_6.1.36 Image
| Product | CPU | Image Version | Release Date | Release | Release notes | Image Download | BSP Download Tag | Comment | SDK | Module | Test Report |
| RSB-3730 | IMX8MM | imx8LBVD0060 | 2024-05-24 | Beta | Release_Note |
Baidu passwd: a887 |
imx8LBVD0060.xml | Function Test Pass (2/4G Ram) | SDK | Module | Test Report |
- Alpha: Basic I/O function bring up by RD;
- Beta: Basic I/O function、performance and middleware verified by RD. Peripherals integrated;
- GA: Beta version by QE verification;
- RTM: Beta version by SI/Power/QE verification and pre-loaded;
系统更新方法（System update method）
Device Routes：
eMMC：/dev/mmcblk2
SD: /dev/mmcblk1
QSPI: /dev/mtd0
For example：SD test
# dd if=/dev/urandom of=data bs=1 count=1024 # dd if=/dev/mmcblk1 of=backup bs=1 count=1024 skip=4096 # dd if=data of=/dev/mmcblk1 bs=1 seek=4096 # dd if=/dev/mmcblk1 of=data1 bs=1 count=1024 skip=4096 # diff data data1 # dd if=backup of=/dev/mmcblk1 bs=1 seek=4096
Install the System from SD Card
1. Copy imx-image-full-imx8mmrsb3730a2-xxxxxx.rootfs.sdcard package to your desk- top. use ubuntu OS.
2. Insert SD card to PC.
3. Make a bootable SD card. For example, the node of an SD card is /dev/sdv.
# umount /dev/sdv* # dd if=./imx-image-full-imx8mmrsb3730a2-xxxx.rootfs.sdcard \ of=/dev/sdv bs=1M # sync
4. Insert SD card and copy imx-image-full-imx8mmrsb3730a1-xxxxxx.rootfs.sdcard to USB disk.
5. Insert USB disk and SD card then boot the whole system from SD card by changing SW1 to 1-2 ON.
6. Enter usb disk folder, make a bootable emmc.
# cd /run/media/sda1/ # umount /dev/mmcblk2* # dd if=./imx-image-full-imx8mmrsb3730a2-xxxx.rootfs.sdcard \ of=/dev/mmcblk2 bs=1M # sync