EPC-R5710 user guide

产品介绍（Product Presentation）

产品特性（product feature）

• NXP i.MX 8M PLUS 4xA53@1.8GHz
• Integrate 2.3 TOPS NPU and extend 8-26 TOPS AI card
• 4kP30,1080p60 HEVC, H.264, VP9, VP8 decoding
• 1080p60 H.265, H.264 encoding
• 1xHDMI2.0
• 5xGbE LAN, 1xGbE Fiber
• USB3.0,USB2.0,RS232,RS485,CAN FD,SATA,SD
• 8 Channels Mic Array
• Support AI card/5G/4G/GPS/ Wi-Fi 5/Wi-Fi6/BT
• Support TPM,TCM
• Linux and, Andriod
• Embeded DeviceOn, DeviceOn.CommBridge

产品官网链接（Product official website link）

EPC-R5710 - NXP i.MX 8M Plus AI edge intelligent System - Advantech

接口布局和尺寸(Layout and Sizes)

External I/O

 

接口布局圖 Board Dimension Layout 

 I/O

硬件接口说明（Hardware interface description）

Connector List

1. DC Power Jack（DC-IN）
2. USB Ports
3. LAN Ports
4. HDMI
5. CAN
6. RS232&DEBUG
7. SIM&SD
8. Reset
9. Recovery
10. GPIO
11. I2S/I2C

快速入门（Quick Start）

系统下载（OS Dowload）

• Linux系统（Linux OS）

Yocto 3.0：

Part Number	Configuartion	ImageName	Image Download	BSP Name	BSP Download	SDK Version	SDK Download
EPC-R5710NQ-BLA1E	4GB,-0 ~ 50°C
EPC-R5710NQ-ALA1E	6GB,-0 ~ 50°C
EPC-R5710IQ-XLA1E	2GB,-40 ~ 70°C
EPC-R5710IQ-BLA1E	4GB,-40 ~ 70°C
EPC-R5710IQ-ALA1E	6GB,-40 ~ 70°C

Note：  LIV= Yocto Linux, UIV=Ubuntu, DIV = Debian, AIV=Android

             LBV=BSP, LIV= Image

             LIV9=Yocto2.5, LIVA=Yocto3.0, LIVB=Yocto 3.3……

• Alpha:  Basic I/O function bring up by RD;

• Beta:  Basic I/O function、performance and middleware verified by RD. Peripherals integrated;

• GA:  Beta version by QE verification;

• RTM:  Beta version by SI/Power/QE verification and pre-loaded

Linux烧录方式（Linux Falsh eMMC Method）

Device routes and test

eMMC: /dev/mmcblk2
SD: /dev/mmcblk1
QSPI1: /dev/mtd0
For example: SD test

Install the system from SD card

1. Copy imx-image-full-imx8mpepcr5710a1-xxxxxx.rootfs.sdcard package to your desk- top.
2. Insert SD card to PC.
3. Make a bootable SD card. For example, the node of an SD card is /dev/sdv

 # umount /dev/sdv*
 # dd if=./imx-image-full-imx8mpepcr5710a1-xxxx.rootfs.sdcard of=/dev/sdv bs=1M  ;sync

4.Insert SD card and copy imx-image-full-imx8mpepcr5710a1-xxxxxx.rootfs.sdcard to USB disk.
5. Insert USB disk and SD card then boot the whole system from SD card by changing SW1 to 1-2 ON, 3-4 OFF.
6. Enter usb disk folder, make a bootable emmc

# cd /run/media/sda1/
# umount /dev/mmcblk2*
# dd if=./imx-image-full-imx8mpepcr5710a1-xxxx.rootfs.sdcard of=/dev/mmcblk2 bs=1M ;sync

Button for System Recovery With SD Card

Function: used to upgrade or use the operating system in the SD card;

Operation method: press the recovery button, plug in the power supply, power on the machine, press it for 2 seconds, and start it from the SD card;

After starting from the SD card, whether the customer needs to upgrade or use the SD card system is customized by the customer (by modifying the files in the SD card)