IoTGateway/BSP/Windows10 IoT Core

APQ8016

Currently we do not have a customized Windows 10 IoT Core image for Advantech APQ8016 projects. Fortunately, the image for Dragonboard 410c is also available on our devices, such as RSB-4760. Here, we will show you how to flash the Windows 10 IoT Core image into RSB-4760.

Flash Pre-built Images

Most of the steps below is based on "Get Started" page from Microsoft. You can also refer to it for more details.

Get the tools

• OS requirement

Microsoft recommends to run Windows 10, but the following steps actually can work on Windows 7. You can choose one of them.

• Download and install the DragonBoard Update Tool

Download the DragonBoard Update Tool by selecting the download link appropriate for your PC: x86 or x64.

Extract the zip file and install on your desktop. The installer will create a shortcut to the DragonBoard Update Tool on your desktop and in your start menu, under Qualcomm->DragonBoardUpdate Tool.

• Download the DragonBoard Windows 10 IoT Core Image

Download Windows 10 IoT Core image from here.

Double click the downloaded ISO file. This will automatically mount the ISO as a new virtual CD-drive. (Look for a new CD-ROM drive)

The mounted virtual drive contains an installer file "Windows_10_IoT_Core_for_QCDB410C.msi". Double click the file to start the installation.

The installer creates a new directory: C:\Program Files (x86)\Microsoft IoT\FFU\QCDB410C\ which contains the DragonBoard410c image file "flash.ffu".

Set up your device

• Set up your RSB-4760 and Install Windows 10 IoT Core

• Connect your device to the network

• Connect to your device

Additional Resources

There are some additional valuable resources for your reference.

• Windows 10 IoT Core Board Support Package (BSP)

• Windows IoT Core Downloads and Tools

• IoT Core manufacturing guide